5.0mm x 6.0mm SURFACE MOUNT LED LAMP Part Number: AAAF5060QBFSEEZGC PRELIMINARY SPEC ATTENTION Blue OBSERVE PRECAUTIONS Hyper Red FOR HANDLING Green ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Chips can be controlled separately. The Blue source color devices are made with InGaN Light z Suitable for all SMT assembly and solder process. Emitting Diode. z Available on tape and reel. The Hyper Red source color devices are made with z Package: 500pcs / reel. AlGaInP on GaAs substrate Light Emitting Diode. z Moisture sensitivity level : level 4. The Green source color devices are made with InGaN z RoHS compliant. on Sapphire Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions GREEN RED BLUE Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ8729 REV NO: V.1 DATE: OCT/28/2009 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201005613 Selection Guide Iv (mcd) [2] V iewing @ 30mA *50mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 Blue (InGaN) 180 350 AAAF5060QBFSEEZGC WATER CLEAR Hyper Red (AlGaInP) *650 *1000 100° Green (InGaN) 280 650 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. *Luminous intensity with asterisk is measured at 50mA; Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Blue 461 λpeak Peak Wavelength Hyper Red 630 nm IF=20mA Green 515 Blue 465 λD [1] Dominant Wavelength Hyper Red 621 nm IF=20mA Green 525 Blue 25 Δλ1/2 Spectral Line Half-width Hyper Red 20 nm IF=20mA Green 30 Blue 100 C Capacitance Hyper Red 25 pF VF=0V;f=1MHz Green 45 Blue 3.3 4 VF [2] Forward Voltage Hyper Red 2 2.5 V IF=20mA Green 3.3 4.1 Blue 10 IR Reverse Current Hyper Red 10 uA VR=5V Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Hyper Red Green Units Power dissipation[2] 350 mW DC Forward Current 30 50 30 mA Peak Forward Current [1] 150 195 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Within 350mW at all chips are lightened. SPEC NO: DSAJ8729 REV NO: V.1 DATE: OCT/28/2009 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201005613 AAAF5060QBFSEEZGC Blue SPEC NO: DSAJ8729 REV NO: V.1 DATE: OCT/28/2009 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201005613 Hyper Red SPEC NO: DSAJ8729 REV NO: V.1 DATE: OCT/28/2009 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201005613 Green SPEC NO: DSAJ8729 REV NO: V.1 DATE: OCT/28/2009 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201005613 AAAF5060QBFSEEZGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAJ8729 REV NO: V.1 DATE: OCT/28/2009 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201005613 PACKING & LABEL SPECIFICATIONS AAAF5060QBFSEEZGC SPEC NO: DSAJ8729 REV NO: V.1 DATE: OCT/28/2009 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1201005613