SUBMINIATURE SOLID STATE LAMP Part Number: AM2520EH/YD Yellow Features Description z Black case enhances contrast. The Yellow source color devices are made with Gallium z Vibration and shock resistant. Arsenide Phosphide on Gallium Phosphide Yellow Light z Housing UL rating:94V-0. Emitting Diode. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD1627 REV NO: V.9B DATE: MAR/26/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102004996 Selection Guide Iv (mcd) [2] Viewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 AM2520EH/YD Yellow (GaAsP/GaP) Yellow Diffused 5 10 40° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Yellow 590 nm IF=20mA λD [1] Dominant Wavelength Yellow 588 nm IF=20mA Δλ1/2 Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAD1627 REV NO: V.9B DATE: MAR/26/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102004996 Yellow AM2520EH/YD SPEC NO: DSAD1627 REV NO: V.9B DATE: MAR/26/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102004996 PACKING & LABEL SPECIFICATIONS AM2520EH/YD SPEC NO: DSAD1627 REV NO: V.9B DATE: MAR/26/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102004996 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAD1627 REV NO: V.9B DATE: MAR/26/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102004996