1.6X0.8mm SMD CHIP LED LAMP AP1608MBC BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description •1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. The Blue source color devices are made with GaN on SiC Light Emitting Diode. •LOW POWER CONSUMPTION. Static electricity and surge damage the LEDS. •WIDE VIEWING ANGLE. It is recommended to use a wrist band or •IDEAL FOR BACKLIGHT AND INDICATOR. anti-electrostatic glove when handling the LEDs. •VARIOUS COLORS AND LENS TYPES AVAILABLE. All devices, equipment and machinery must be electrically •PACKAGE: 2000PCS / REEL . grounded. •RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAD0923 REV NO: V.3 DATE: MAR/10/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000018 Selection Guide Iv (mcd) V i e w i n g @ 20mA Angle Part No. Dice Lens Type Min. Typ. 2θθ θ θ1/2 AP1608MBC BLUE (GaN) WATER CLEAR 4 10 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Blue 430 nm IF=20mA λD Dominant Wavelength Blue 466 nm IF=20mA Δλ1/2 Spectral Line Half-width Blue 60 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.8 4.5 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0923 REV NO: V.3 DATE: MAR/10/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000018 Blue AP1608MBC SPEC NO: DSAD0923 REV NO: V.3 DATE: MAR/10/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000018 AP1608MBC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength) , the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD0923 REV NO: V.3 DATE: MAR/10/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000018