2.0x1.25mm SMD CHIP LED LAMP AP2012MBC BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description
2.0mmx1.25mm SMT LED,1.1mm THICKNESS. The Blue source color devices are made with GaN on SiC
LOW POWER CONSUMPTION. Light Emitting Diode.
WIDE VIEWING ANGLE. Static electricity and surge damage the LEDS.
IDEAL FOR BACKLIGHT AND INDICATOR. It is recommended to use a wrist band or
VARIOUS COLORS AND LENS TYPES AVAILABLE. anti-electrostatic glove when handling the LEDs.
PACKAGE : 2000PCS / REEL. All devices, equipment and machinery must be electrically grounded.
RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0942 REV NO: V.3 DATE: MAR/11/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000119 Selection Guide Iv (mcd) V i e w i n g @ 20mA Angle Part No. Dice Lens Type Min. Typ. 2θθ θ θ1/2 AP2012MBC BLUE (GaN) WATER CLEAR 4 10 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Blue 430 nm I =20mA F Dominant Wavelength Blue 466 nm I =20mA λD F Spectral Line Half-width Blue 60 nm I =20mA Δλ1/2 F C Capacitance Blue 100 pF V =0V;f=1MHz F V Forward Voltage Blue 3.8 4.5 V I =20mA F F I Reverse Current Blue 10 uA V = 5V R R Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0942 REV NO: V.3 DATE: MAR/11/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000119 Blue AP2012MBC SPEC NO: DSAD0942 REV NO: V.3 DATE: MAR/11/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000119 AP2012MBC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD0942 REV NO: V.3 DATE: MAR/11/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000119