3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APA3010RWF/A WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING Description ELECTROSTATIC DISCHARGE The source color devices are made with InGaN on SiC SENSITIVE DEVICES Light Emitting Diode. Static electricity and surge damage the LEDS. Features It is recommended to use a wrist band or anti-electrostatic z 3.0mmx1.0mm right angle SMT LED, 2.0mm thickness. glove when handling the LEDs. All devices, equipment and machinery must be electrically z Low power consumption. grounded. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. Applications z Package : 2000pcs / reel. z traffic signaling. z Moisture sensitivity level : level 3. z backlighting (illuminated advertising , general lighting). z Electrostatic discharge threshold (HBM):1000V. z interior and exterior automotive lighting. z Typ. color temperature:6500K z substitution of micro incandescent lamps. z Color coordinates:x=0.31,y=0.31 acc. to CIE1931(white). z Reading camps. z Optical efficiency:8.8 lm/W(typ.) z signal and symbol luminaire for orientation. z Color reproduction index:80 z marker lights (e.g. steps, exit ways, etc). z RoHS compliant. z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG3639 REV NO: V.7 DATE: AUG/15/2008 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203005366 Selection Guide Note2 Note3 Viewing luminous Intensity Φv (mlm) Note1 Iv(mcd) @ 20 mA @ 20 mA Angle Part No. Dice Lens Type Min. Typ. Typ. 2 θ 1/2 APA3010RWF/A WHITE (InGaN) YELLOW FLUORESCENT 50 150 560 120 ° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C DC Forward Current IF 30 mA Note4 IFM 100 mA Peak Forward Current Thermal resistance Rth JA 350 °C/W Note5 Junction/ambient Rth JS 120 °C/W Junction/solder point Notes: 1 .θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 2 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥ 16 mm per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 Note1 0.31 - X IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 Note1 0.31 - Y IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] 2.7 Note2 Forward Voltage IF=20mA [Typ.] 3.2 V VF Forward Voltage IF=20mA [Max.] 4.0 Reverse Current (VR=5V) [Typ.] 0.01 IR μ A Reverse Current (VR=5V) [Max.] 10 Temperature coefficient of x -3 TC x -0.1 10 /° C IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] Temperature coefficient of y -3 TCy -0.2 10 /° C IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] Temperature coefficient of VF TCV -2.5 mV/° C IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAG3639 REV NO: V.7 DATE: AUG/15/2008 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203005366 Brightness codes Note1 Note2 luminous Intensity Φv (mlm) Iv(mcd) @ 20 mA @ 20 mA Code. Min. Max. Typ. H 50 90 200 M 70 130 300 N 110 220 480 P 180 320 710 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APA3010RWF/A SPEC NO: DSAG3639 REV NO: V.7 DATE: AUG/15/2008 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203005366 APA3010RWF/A SPEC NO: DSAG3639 REV NO: V.7 DATE: AUG/15/2008 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203005366 APA3010RWF/A White CIE 0.40 c0 0.35 b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x Rank a2 Rank a0 X 0.263 0.282 0.265 0.242 X 0.282 0.298 0.286 0.265 Y 0.213 0.245 0.265 0.226 Y 0.245 0.271 0.299 0.265 Rank b2 Rank b1 X 0.298 0.313 0.306 0.286 X 0.313 0.329 0.329 0.306 Y 0.271 0.296 0.332 0.299 Y 0.296 0.325 0.371 0.332 Rank c0 X 0.329 0.358 0.363 0.329 Y 0.325 0.372 0.400 0.371 SPEC NO: DSAG3639 REV NO: V.7 DATE: AUG/15/2008 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203005366 y APA3010RWF/A Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications Reel Dimension (Units : mm) SPEC NO: DSAG3639 REV NO: V.7 DATE: AUG/15/2008 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203005366 PACKING & LABEL SPECIFICATIONS APA3010RWF/A SPEC NO: DSAG3639 REV NO: V.7 DATE: AUG/15/2008 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203005366