APBA3010EYC-GX 3.0 mm x 1.0 mm Right Angle SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS � The High Efficiency Red source color devices are Yellow Made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode � The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode Yellow FEATURES � 3.0 x 2.0 x 1.0 mm right angle SMD LED, 1.0 mm thickness � Low power consumption � Wide viewing angle � Ideal for backlight and indicator � Package: 2000 pcs / reel � Moisture sensitivity level: 3 � Tinned pads for improved solderability � RoHS compliant APPLICATIONS � Backlight � Status indicator � Home and smart appliances RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) � Wearable and portable devices � Healthcare applications Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE [2] [1] Iv (mcd) @ 20mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2θ1/2 8 15 ■ High Efficiency Red (GaAsP/GaP) *3 *8 APBA3010EYC-GX Water Clear 140° 5 8 ■ Yellow (GaAsP/GaP) *5 *8 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 © 2017 Kingbright. All Rights Reserved. Spec No: DSAL3681 / 1203000797 Rev No: V.7A Date: 09/14/2017 APBA3010EYC-GX ELECTRICAL / OPTICAL CHARACTERISTICS at T =25°C A Value Parameter Symbol Emitting Color Unit Typ. Max. High Efficiency Red 627 Wavelength at Peak Emission I = 20mA λ - nm F peak Yellow 590 High Efficiency Red 617 [1] Dominant Wavelength I = 20mA λ - nm F dom Yellow 588 Spectral Bandwidth at 50% Φ REL MAX High Efficiency Red 45 Δλ - nm I = 20mA Yellow 35 F High Efficiency Red 15 Capacitance C - pF Yellow 20 High Efficiency Red 2 2.5 [2] Forward Voltage I = 20mA V V F F Yellow 2.1 2.5 High Efficiency Red 10 Reverse Current (V = 5V) I - uA R R Yellow 10 Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25°C A Value Parameter Symbol Unit High Efficiency Red Yellow Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 125 110 °C J Operating Temperature T -40 To +85 °C op Storage Temperature T -40 To +85 °C stg DC Forward Current I 30 30 mA F [1] Peak Forward Current I 160 140 mA FM Electrostatic Discharge Threshold (HBM) 8000 8000 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 © 2017 Kingbright. All Rights Reserved. Spec No: DSAL3681 / 1203000797 Rev No: V.7A Date: 09/14/2017 APBA3010EYC-GX TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Yellow Red 0° 100% -15° 15° T = 25 °C a T = 25 °C a -30° 30° 80% -45° 45° 60% 60° -60° 40% 20% -75° 75° 0% 350 400 450 500 550 600 650 700 750 800 -90° 90° Wavelength (nm) 1.0 0.5 0.0 0.5 1.0 HIGH EFFICIENCY RED Forward Current vs. Luminous Intensity vs. Forward Current Derating Curve Luminous Intensity vs. Forward Voltage Forward Current Ambient Temperature 50 2.5 50 2.5 T = 25 °C a T = 25 °C a 40 2.0 40 2.0 30 1.5 30 1.5 20 1.0 20 1.0 10 0.5 10 0.5 0 0.0 0 0.0 1.5 1.7 1.9 2.1 2.3 2.5 0 1020 3040 50 -40 -20 0 20 406080 100 -40 -20 0 204060 80 100 Forward voltage (V) Forward current (mA) Ambient temperature (°C) Ambient temperature (°C) YELLOW Forward Current vs. Forward Current Derating Curve Luminous Intensity vs. Luminous Intensity vs. Forward Voltage Forward Current Ambient Temperature 50 2.5 50 2.5 T = 25 °C a T = 25 °C a 40 2.0 40 2.0 30 1.5 30 1.5 20 1.0 20 1.0 10 0.5 10 0.5 0 0.0 0 0.0 1.5 1.7 1.9 2.1 2.3 2.5 0 1020 3040 50 -40 -20 0 20 406080 100 -40 -20 0 204060 80 100 Forward voltage (V) Forward current (mA) Ambient temperature (°C) Ambient temperature (°C) Page 3 / 4 © 2017 Kingbright. All Rights Reserved. Spec No: DSAL3681 / 1203000797 Rev No: V.7A Date: 09/14/2017 Forward current (mA) Relative Intensity (a. u.) Forward current (mA) Luminous intensity normalised Luminous intensity normalised at 20mA at 20mA Permissible forward current (mA) Permissible forward current (mA) Luminous intensity normalised Luminous intensity normalised at T = 25 °C a at Ta = 25 °C APBA3010EYC-GX TAPE SPECIFICATIONS (units : mm) TECHNICAL DATA REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes Page 4 / 4 © 2017 Kingbright. All Rights Reserved. Spec No: DSAL3681 / 1203000797 Rev No: V.7A Date: 09/14/2017