3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP APBA3010SYKCGKC SUPER BRIGHT YELLOW GREEN Features Description
3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm The Super Bright Yellow source color devices are THICKNESS. made with DH InGaAlP on GaAs substrate Light
LOW POWER CONSUMPTION. Emitting Diode.
WIDE VIEWING ANGLE. The Green source color devices are made with
IDEAL FOR BACKLIGHT AND INDICATOR. InGaAlP on GaAs substrate Light Emitting Diode.
VARIOUS COLRS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1093 REV NO: V.2 DATE: DEC/29/2003 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.HOU Selection Guide Iv (mcd) V i e w i n g @ 20mA Angle Part No. Dice Lens Type Min. Typ. 2 θ θ θ θ 1/2 SUPER BRIGHT YELLOW (InGaAlP) 36 80 APBA3010SYKCGKC WATER CLEAR 140° GREEN (InGaAIP) 18 50 Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Super Bright Yellow 590 λpeak Peak Wavelength nm I =20mA F Green 574 Super Bright Yellow 590 Dominate Wavelength nm I =20mA λD F Green 570 Super Bright Yellow 20 Δλ1/2 Spectral Line Half-width nm I =20mA F Green 20 Super Bright Yellow 20 C Capacitance pF V =0V;f=1MHz F Green 15 Super Bright Yellow 2.0 2.5 V Forward Voltage V I =20mA F F Green 2.1 2.5 IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Green Units Power dissipation 125 105 mW DC Forward Current 30 30 mA Peak Forward Current [1] 175 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1093 REV NO: V.2 DATE: DEC/29/2003 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.HOU APBA3010SYKCGKC Super Bright Yellow SPEC NO: DSAD1093 REV NO: V.2 DATE: DEC/29/2003 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.HOU Green SPEC NO: DSAD1093 REV NO: V.2 DATE: DEC/29/2003 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.HOU APBA3010SYKCGKC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1093 REV NO: V.2 DATE: DEC/29/2003 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.HOU