3.2x1.0mm RIGHT ANGLE BI-COLOR SMD CHIP LED LAMP Part Number: APBA3210YSGC-F01 Yellow Super Bright Green Features Description z 3.2mmx1.0mm right angle SMT LED,1.5mm thickness. The Yellow source color devices are made with Gallium z Low power consumption. Arsenide Phosphide on Gallium Phosphide Yellow Light z Wide viewing angle. Emitting Diode. z Package : 2000pcs / reel. The Super Bright Green source color devices are made with z Moisture sensitivity level : level 3. Gallium Phosphide Green Light Emitting Diode. z Tinned pads for improved solderability. z RoHs compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1096 REV NO: V.6 DATE: JUN/21/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203003894 Selection Guide Iv (mcd) [2] Viewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 Yellow (GaAsP/GaP) 5 8 APBA3210YSGC-F01 Water Clear 120° Super Bright Green (GaP) 8 15 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Yellow 590 λpeak Peak Wavelength nm IF=20mA Super Bright Green 565 Yellow 588 λD [1] Dominant Wavelength nm IF=20mA Super Bright Green 568 Yellow 35 Δλ1/2 Spectral Line Half-width nm IF=20mA Super Bright Green 30 Yellow 20 C Capacitance pF VF=0V;f=1MHz Super Bright Green 15 Yellow 2.1 2.5 VF [2] Forward Voltage F=20mA V I Super Bright Green 2.2 2.5 Yellow 10 IR Reverse Current uA VR = 5V Super Bright Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Yellow Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 140 140 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1096 REV NO: V.6 DATE: JUN/21/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203003894 APBA3210YSGC-F01 Yellow SPEC NO: DSAF1096 REV NO: V.6 DATE: JUN/21/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203003894 Super Bright Green SPEC NO: DSAF1096 REV NO: V.6 DATE: JUN/21/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203003894 APBA3210YSGC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern Reel Dimension (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAF1096 REV NO: V.6 DATE: JUN/21/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203003894 PACKING & LABEL SPECIFICATIONS APBA3210YSGC-F01 SPEC NO: DSAF1096 REV NO: V.6 DATE: JUN/21/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203003894