APBVA3010SURKCGKC 3.0 mm x 1.0 mm Right Angle SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS � The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode � The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode � Electrostatic discharge and power surge could damage the LEDs � It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs � All devices, equipments and machineries must be electrically grounded FEATURES � 3.0 mm x 1.0 mm right angle SMD LED, 2.0 mm thickness � Low power consumption � Wide viewing angle � Ideal for backlight and indicator � Package : 2000 pcs / reel � Moisture sensitivity level: 3 � Tinned pads for improved solderability � RoHS compliant RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) APPLICATIONS � Backlight � Status indicator � Home and smart appliances � Wearable and portable devices � Healthcare applications ATTENTION Notes: Observe precautions for handling 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. electrostatic discharge sensitive devices 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE [2] [1] Iv (mcd) @ 20mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2θ1/2 120 300 ■ Hyper Red (AlGaInP) *40 *80 APBVA3010SURKCGKC Water Clear 140° 40 70 ■ Green (AlGaInP) *40 *70 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 © 2018 Kingbright. All Rights Reserved. Spec No: DSAI8842 / 1203008694 Rev No: V.6A Date: 01/25/2018 APBVA3010SURKCGKC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25°C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 645 Wavelength at Peak Emission I = 20mA λ - nm F peak Green 574 Hyper Red 630 [1] Dominant Wavelength I = 20mA λ - nm F dom Green 570 Spectral Bandwidth at 50% Φ REL MAX Hyper Red 28 Δλ - nm I = 20mA Green 20 F Hyper Red 35 Capacitance C - pF Green 15 Hyper Red 1.95 2.5 [2] Forward Voltage I = 20mA V V F F Green 2.1 2.5 Hyper Red 10 Reverse Current (V = 5V) I - uA R R Green 10 Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd: ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25°C A Value Parameter Symbol Unit Hyper Red Green Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 °C j Operating Temperature T -40 to +85 °C op Storage Temperature T -40 to +85 °C stg DC Forward Current I 30 30 mA F [1] Peak Forward Current I 185 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - Notes: 1. 1/10 Duty Cycle , 0.1ms Pulse Width . 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 © 2018 Kingbright. All Rights Reserved. Spec No: DSAI8842 / 1203008694 Rev No: V.6A Date: 01/25/2018 APBVA3010SURKCGKC TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Green Red 0° 100% -15° 15° T = 25 °C a T = 25 °C a -30° 30° 80% -45° 45° 60% 60° -60° 40% 20% -75° 75° 0% 350 400 450 500 550 600 650 700 750 800 90° -90° Wavelength (nm) 1.0 0.5 0.0 0.5 1.0 HYPER RED Forward Current vs. Luminous Intensity vs. Forward Current Derating Curve Luminous Intensity vs. Forward Voltage Forward Current Ambient Temperature 50 2.5 50 2.5 T = 25 °C a T = 25 °C a 40 2.0 40 2.0 30 1.5 30 1.5 20 1.0 20 1.0 10 0.5 10 0.5 0 0.0 0 0.0 1.5 1.7 1.9 2.1 2.3 2.5 0 1020 3040 50 -40 -20 0 20 406080 100 -40 -20 0 204060 80 100 Forward voltage (V) Forward current (mA) Ambient temperature (°C) Ambient temperature (°C) GREEN Forward Current Derating Curve Forward Current vs. Luminous Intensity vs. Luminous Intensity vs. Forward Voltage Forward Current Ambient Temperature 50 2.5 50 2.5 T = 25 °C a T = 25 °C a 40 2.0 40 2.0 30 1.5 30 1.5 20 1.0 20 1.0 10 0.5 10 0.5 0 0.0 0 0.0 1.5 1.7 1.9 2.1 2.3 2.5 0 1020 3040 50 -40 -20 0 20 406080 100 -40 -20 0 204060 80 100 Forward voltage (V) Forward current (mA) Ambient temperature (°C) Ambient temperature (°C) Page 3 / 4 © 2018 Kingbright. All Rights Reserved. Spec No: DSAI8842 / 1203008694 Rev No: V.6A Date: 01/25/2018 Forward current (mA) Forward current (mA) Relative Intensity (a. u.) Luminous intensity normalised at Luminous intensity normalised at 20 mA 20 mA Permissible forward current (mA) Permissible forward current (mA) Luminous intensity normalised at Luminous intensity normalised at Ta = 25 °C Ta = 25 °C APBVA3010SURKCGKC TAPE SPECIFICATIONS (units : mm) TECHNICAL DATA REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes Page 4 / 4 © 2018 Kingbright. All Rights Reserved. Spec No: DSAI8842 / 1203008694 Rev No: V.6A Date: 01/25/2018