3.0x2.0mm RIGHT ANGLE SMD LED Part Number: APBVDA3020CGKSYKC Green Super Bright Yellow Features Description z 3.0mmx2.0mm SMT LED,2.8mm thickness. The Green source color devices are made with AlGaInP on z Low power consumption. GaAs substrate Light Emitting Diode. z Various colors and lens types available. The Super Bright Yellow device is made with AlGaInP (on z Ideal for back light and indicator GaAs substrate) light emitting diode chip. z Package : 2000pcs / reel. z When soldered in the sideview configuration, the maximum shear tolerance of the epoxy lens is 300g. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ2425 REV NO: V.2 DATE: NOV/03/2009 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1203009046 Selection Guide Iv (mcd) [2] Viewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 Green (AlGaInP) 50 150 APBVDA3020CGKSYKC WATER CLEAR 15° Super Bright Yellow (AlGaInP) 480 750 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Green 574 λpeak Peak Wavelength nm IF=20mA Super Bright Yellow 590 Green 570 λD [1] Dominant Wavelength nm IF=20mA Super Bright Yellow 590 Green 20 Δλ1/2 Spectral Line Half-width nm IF=20mA Super Bright Yellow 20 Green 15 C Capacitance pF VF=0V;f=1MHz Super Bright Yellow 20 Green 2.1 2.5 VF [2] Forward Voltage F=20mA V I Super Bright Yellow 2 2.5 Green 10 IR Reverse Current uA VR = 5V Super Bright Yellow 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Super Bright Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 150 175 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ2425 REV NO: V.2 DATE: NOV/03/2009 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1203009046 APBVDA3020CGKSYKC Green SPEC NO: DSAJ2425 REV NO: V.2 DATE: NOV/03/2009 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1203009046 Super Bright Yellow SPEC NO: DSAJ2425 REV NO: V.2 DATE: NOV/03/2009 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1203009046 APBVDA3020CGKSYKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAJ2425 REV NO: V.2 DATE: NOV/03/2009 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1203009046 PACKING & LABEL SPECIFICATIONS APBVDA3020CGKSYKC SPEC NO: DSAJ2425 REV NO: V.2 DATE: NOV/03/2009 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: M.L.Xu ERP: 1203009046