3.2X1.6mm SMD CHIP LED LAMP Part Number: APC3216SURCK HYPER RED Features Description The Hyper Red source color devices are made with DH z3.2X1.6mm SMT LED, 1.1mm THICKNESS. zLOW POWER CONSUMPTION. InGaAlP on GaAs substrate Light Emitting Diode. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS / REEL . zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS COMPLIANT. Package Dimensions Notes: 1.All dimensions are in millimeters (inches). 2.Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD0998 REV NO: V.2 DATE: APR/18/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203001002 Selection Guide Iv (mcd) [2] Viewing @ 20 mA Angle [1] Part No. Dice Lens Type 2θ1/2 Min. Typ. APC3216SURCK HYPER RED (InGaAlP) WATER CLEAR 50 150 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red 650 nm IF=20mA Dominant Wavelength Hyper Red 635 nm IF=20mA λD [1] Δλ1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0998 REV NO: V.2 DATE: APR/18/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203001002 Hyper Red APC3216SURCK SPEC NO: DSAD0998 REV NO: V.2 DATE: APR/18/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203001002 APC3216SURCK Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAD0998 REV NO: V.2 DATE: APR/18/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203001002 PACKING & LABEL SPECIFICATIONS APC3216SURCK SPEC NO: DSAD0998 REV NO: V.2 DATE: APR/18/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203001002