3.2mmx3.6mm FULL-COLOR SURFACE MOUNT LED LAMP Part Number: APF3236SURKMGKPBA PRELIMINARY SPEC HYPER RED ATTENTION MEGA GREEN OBSERVE PRECAUTIONS FOR HANDLING BLUE ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description The Hyper Red source color devices are made with DH zLOW POWER CONSUMPTION. InGaAlP on GaAs substrate Light Emitting Diode. z3.2mmx3.6mm SMT LED, 1.1mm THICKNESS. The Mega Green source color devices are made with zONE RED, ONE GREEN AND ONE BLUE CHIPS IN DH InGaAlP on GaAs substrate Light Emitting Diode. ONE PACKAGE. The Blue source color devices are made with InGaN on SiC zCAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, Light Emitting Diode. INCLUDING WHITE LIGHT. Static electricity and surge damage the LEDS. zPACKAGE : 1000PCS / REEL. It is recommended to use a wrist band or anti-electrostatic zMOISTURE SENSITIVITY LEVEL : LEVEL 3. glove when handling the LEDs. All devices, equipment and machinery must be electrically zRoHS COMPLIANT. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subjected to change without notice. SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005708 Selection Guide Iv (mcd) [2] Viewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 HYPER RED (InGaAlP) 70 150 APF3236SURKMGKPBA MEGA GREEN (InGaAIP) WATER CLEAR 18 60 120° BLUE (InGaN) 18 60 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Hyper Red 650 λpeak Peak Wavelength Mega Green 574 nm IF=20mA Blue 468 Hyper Red 635 λD [1] Dominant Wavelength Mega Green 570 nm IF=20mA Blue 470 Hyper Red 28 Spectral Line Half-width Mega Green 20 nm IF=20mA Δλ1/2 Blue 21 Hyper Red 35 C Capacitance Mega Green 15 pF VF=0V;f=1MHz Blue 100 Hyper Red 1.95 2.5 VF [2] Forward Voltage Mega Green 2.1 2.5 V IF=20mA Blue 3.3 3.8 Hyper Red 10 I Reverse Current Mega Green 10 uA VR = 5V R Blue 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Mega Green Blue Units Power dissipation 75 75 114 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 185 150 100 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005708 APF3236SURKMGKPBA Hyper Red SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005708 Mega Green SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005708 Blue SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005708 APF3236SURKMGKPBA Recommended Soldering Pattern (Units: mm ; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005708 PACKING & LABEL SPECIFICATIONS APF3236SURKMGKPBA SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005708