3.2mmx3.6mm FULL-COLOR SURFACE MOUNT LED LAMP Part Number: APF3236SURKVGAPBA ATTENTION Hyper Red OBSERVE PRECAUTIONS Green FOR HANDLING Blue ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2mmx3.6mm SMT LED, 1.1mm thickness. The Hyper Red source color devices are made with z Low power consumption. AlGaInP on GaAs substrate Light Emitting Diode. z One red, one green and one blue chips in one package. The Green source color devices are made with InGaN on z Can produce any color in visible spectrum, including G-SiC Light Emitting Diode. white light. The Blue source color devices are made with InGaN z Package : 1000pcs / reel. on SiC Light Emitting Diode. z Moisture sensitivity level : level 3. Static electricity and surge damage the LEDS. z RoHS compliant. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG5709 REV NO: V.4 DATE: APR/02/2009 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203005400 Selection Guide Iv (mcd) [2] Viewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 Hyper Red (AlGaInP) 70 220 APF3236SURKVGAPBA Green (InGaN) WATER CLEAR 50 150 120° Blue (InGaN) 18 60 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Hyper Red 650 λpeak Peak Wavelength Green 520 nm IF=20mA Blue 468 Hyper Red 630 λD [1] Dominant Wavelength Green 525 nm IF=20mA Blue 470 Hyper Red 28 Δλ1/2 Spectral Line Half-width Green 35 nm IF=20mA Blue 21 Hyper Red 35 C Capacitance Green 100 pF VF=0V;f=1MHz Blue 100 Hyper Red 1.95 2.5 VF [2] Forward Voltage Green 3.2 4 V IF=20mA Blue 3.2 4 Hyper Red 10 IR Reverse Current Green 10 uA VR=5V Blue 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Blue Units Power dissipation 75 120 120 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 185 100 100 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5709 REV NO: V.4 DATE: APR/02/2009 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203005400 APF3236SURKVGAPBA Hyper Red SPEC NO: DSAG5709 REV NO: V.4 DATE: APR/02/2009 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203005400 Green SPEC NO: DSAG5709 REV NO: V.4 DATE: APR/02/2009 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203005400 Blue SPEC NO: DSAG5709 REV NO: V.4 DATE: APR/02/2009 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203005400 APF3236SURKVGAPBA Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAG5709 REV NO: V.4 DATE: APR/02/2009 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203005400 PACKING & LABEL SPECIFICATIONS APF3236SURKVGAPBA SPEC NO: DSAG5709 REV NO: V.4 DATE: APR/02/2009 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203005400