3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APFA3010SURKCGKPBAC PRELIMINARY SPEC ATTENTION Hyper Red OBSERVE PRECAUTIONS Green FOR HANDLING Blue ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.0mmx1.0mm right angle SMT LED, 1.5mm thickness. The Hyper Red source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. The Green source color devices are made with AlGaInP on z Ideal for backlight and indicator. GaAs substrate Light Emitting Diode. z Package : 2000pcs / reel. The Blue source color devices are made with InGaN z Moisture sensitivity level : level 3. on SiC Light Emitting Diode. z RoHS compliant. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH7953 REV NO: V.2 DATE: APR/09/2009 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203007279 Selection Guide Iv (mcd) [2] Viewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 Hyper Red (AlGaInP) 70 200 APFA3010SURKCGKPBAC Green (AlGaInP) WATER CLEAR 18 50 120° Blue (InGaN) 18 60 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Hyper Red 650 λpeak Peak Wavelength Green 574 nm IF=20mA Blue 468 Hyper Red 630 λD [1] Dominant Wavelength Green 570 nm IF=20mA Blue 470 Hyper Red 28 Δλ1/2 Spectral Line Half-width Green 20 nm IF=20mA Blue 21 Hyper Red 35 C Capacitance Green 15 pF VF=0V;f=1MHz Blue 100 Hyper Red 1.95 2.5 VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA Blue 3.2 4 Hyper Red 10 IR Reverse Current Green 10 uA VR=5V Blue 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Blue Units Power dissipation 75 75 120 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 185 150 100 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH7953 REV NO: V.2 DATE: APR/09/2009 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203007279 APFA3010SURKCGKPBAC Hyper Red SPEC NO: DSAH7953 REV NO: V.2 DATE: APR/09/2009 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203007279 Green SPEC NO: DSAH7953 REV NO: V.2 DATE: APR/09/2009 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203007279 Blue SPEC NO: DSAH7953 REV NO: V.2 DATE: APR/09/2009 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203007279 APFA3010SURKCGKPBAC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAH7953 REV NO: V.2 DATE: APR/09/2009 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203007279 PACKING & LABEL SPECIFICATIONS APFA3010SURKCGKPBAC SPEC NO: DSAH7953 REV NO: V.2 DATE: APR/09/2009 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1203007279