2.0x1.25mm SMD CHIP LED LAMP Part Number: APHBM2012PBASURKC ATTENTION Blue OBSERVE PRECAUTIONS Hyper Red FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 2.0mmx1.25mm SMT LED, 0.45mm max. thickness. The Blue source color devices are made with InGaN z Bi -color, low power consumption. on SiC Light Emitting Diode. z Wide viewing angle. The Hyper Red source color devices are made with Al- z Ideal for backlight and indicator. GaInP on GaAs substrate Light Emitting Diode. z Package : 2000pcs / reel. Static electricity and surge damage the LEDS. z Moisture sensitivity level : level 3. It is recommended to use a wrist band or anti-electrostatic z RoHS compliant. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG7624 REV NO: V.3 DATE: MAR/26/2009 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203005980 Selection Guide Iv (mcd) [2] V iewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 Blue (InGaN) 18 50 APHBM2012PBASURKC WATER CLEAR 120° Hyper Red (AlGaInP) 70 220 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Blue 468 λpeak Peak Wavelength nm IF=20mA Hyper Red 650 Blue 470 λD [1] Dominant Wavelength nm IF=20mA Hyper Red 630 Blue 21 Δλ1/2 Spectral Line Half-width nm IF=20mA Hyper Red 28 Blue 100 C Capacitance pF VF=0V;f=1MHz Hyper Red 35 Blue 3.2 4 VF [2] Forward Voltage V IF=20mA Hyper Red 1.95 2.5 Blue 10 IR Reverse Current uA VR = 5V Hyper Red 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Hyper Red Units Power dissipation 120 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 100 185 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG7624 REV NO: V.3 DATE: MAR/26/2009 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203005980 APHBM2012PBASURKC Blue SPEC NO: DSAG7624 REV NO: V.3 DATE: MAR/26/2009 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203005980 Hyper Red SPEC NO: DSAG7624 REV NO: V.3 DATE: MAR/26/2009 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203005980 APHBM2012PBASURKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAG7624 REV NO: V.3 DATE: MAR/26/2009 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203005980 PACKING & LABEL SPECIFICATIONS APHBM2012PBASURKC SPEC NO: DSAG7624 REV NO: V.3 DATE: MAR/26/2009 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203005980