1.0x0.5mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APHH1005RWF/A WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC Description DISCHARGE SENSITIVE The source color devices are made with InGaN on SiC DEVICES Light Emitting Diode. Features Static electricity and surge damage the LEDS. �1.0mmx0.5mm SMT LED, 0.7mm thickness. It is recommended to use a wrist band or anti-electrostatic �Low power consumption. glove when handling the LEDs. �Wide viewing angle. All devices, equipment and machinery must be electrically �Ideal for backlight and indicator. grounded. �Moisture sensitivity level : level 3. �Package: 2000pcs / reel . �Electrostatic discharge threshold (HBM):1000V. Applications �Typ. color temperature:6500K �Color coordinates:x=0.31,y=0.31 acc. to CIE1931(white). �traffic signaling. �Optical efficiency: 13.28 lm/W(typ.) �backlighting (illuminated advertising , general lighting). �Color reproduction index:80 �interior and exterior automotive lighting. �RoHS compliant. �substitution of micro incandescent lamps. �reading lamps. �signal and symbol luminaire for orientation. �marker lights (e.g. steps, exit ways, etc). �decorative and entertainment lighting. �indoor and outdoor commercial and residential Package Dimensions architectural lighting. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG6504 REV NO: V.3 DATE:AUG/15/2008 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:S.P.Chen ERP: 1203005570 Selection Guide Note2 Note3 Viewing luminous Intensity Φv (mlm) Note1 Iv(mcd) @ 20 mA @ 20 mA Angle Dice Lens Type Part No. Min. Typ. Typ. 2θ1/2 APHH1005RWF/A WHITE (InGaN) YELLOW FLUORESCENT 70 140 850 170° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C DC Forward Current IF 30 mA Note4 IFM 100 mA Peak Forward Current Thermal resistance Note5 Rth JA 280 Junction/ambient °C/W Rth JS 160 Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 2 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 Note1 0.31 - X IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 Note1 0.31 - Y IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] 2.7 Note2 Forward Voltage IF=20mA [Typ.] 3.2 V VF Forward Voltage IF=20mA [Max.] 4.0 Reverse Current (VR=5V) [Typ.] 0.01 IR μA Reverse Current (VR=5V) [Max.] 10 Temperature coefficient of x -3 TC x -0.1 10 /°C IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of y -3 TCy -0.2 10 /°C IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of VF TCV -2.5 mV/°C IF=20mA, -10°C≤ T≤100°C [Typ.] Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAG6504 REV NO: V.3 DATE:AUG/15/2008 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:S.P.Chen ERP: 1203005570 Brightness codes Note1 Note2 luminous Intensity Φv (mlm) Iv(mcd) @ 20 mA @ 20 mA Code. Min. Max. Typ. M 70 130 400 N 110 220 600 P 180 320 750 Q 280 420 920 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APHH1005RWF/A SPEC NO: DSAG6504 REV NO: V.3 DATE:AUG/15/2008 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:S.P.Chen ERP: 1203005570 APHH1005RWF/A SPEC NO: DSAG6504 REV NO: V.3 DATE:AUG/15/2008 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:S.P.Chen ERP: 1203005570 APHH1005RWF/A White CIE 0.40 c0 0.35 b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x Rank a2 Rank a0 X 0.263 0.282 0.265 0.242 X 0.282 0.298 0.286 0.265 Y 0.213 0.245 0.265 0.226 Y 0.245 0.271 0.299 0.265 Rank b2 Rank b1 X 0.298 0.313 0.306 0.286 X 0.313 0.329 0.329 0.306 Y 0.271 0.296 0.332 0.299 Y 0.296 0.325 0.371 0.332 Rank c0 X 0.329 0.358 0.363 0.329 Y 0.325 0.372 0.400 0.371 SPEC NO: DSAG6504 REV NO: V.3 DATE:AUG/15/2008 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:S.P.Chen ERP: 1203005570 y APHH1005RWF/A Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications Reel Dimension (Units : mm) SPEC NO: DSAG6504 REV NO: V.3 DATE:AUG/15/2008 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:S.P.Chen ERP: 1203005570 PACKING & LABEL SPECIFICATIONS APHH1005RWF/A SPEC NO: DSAG6504 REV NO: V.3 DATE:AUG/15/2008 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:S.P.Chen ERP: 1203005570