1.6x0.8mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APHK1608RWC/Z WHITE ATTENTION OBSERVE PRECAUTIONS Description FOR HANDLING ELECTROSTATIC The source color devices are made with InGaN on SiC Light DISCHARGE SENSITIVE Emitting Diode. DEVICES Static electricity and surge damage the LEDS. It is recommended to use a wrist band or Features anti-electrostatic glove when handling the LEDs. ●1.6mmx0.8mm SMT LED, 0.7mm THICKNESS. All devices, equipment and machinery must be electrically ●LOW POWER CONSUMPTION. grounded. ●WIDE VIEWING ANGLE. ●IDEAL FOR BACK LIGHT AND INDICATOR. Applications ●VARIOUS COLORS AND LENS TYPES AVAILABLE. ●PACKAGE : 2000PCS / REEL. z traffic signaling. ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. z backlighting (illuminated advertising , general lighting). z ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. z interior and exterior automotive lighting. z TYP. COLOR TEMPERATURE:6500K z substitution of micro incandescent lamps. z COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO z Reading lamps. CIE1931(WHITE). z signal and symbol luminaire for orientation. z OPTICAL EFFICIENCY:26 lm/W(TYP.) z marker lights (e.g. steps, exit ways, etc). z COLOR REPRODUCTION INDEX:80 z decorative and entertainment lighting. zRoHS COMPLIANT. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH0168 REV NO: V.2 DATE: JUN/08/2007 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000651 Selection Guide Note2 Note3 Viewing luminous Intensity Φv (mlm) Note1 Iv(mcd) @ 20 mA @ 20 mA Angle Part No. Dice Lens Type Min. Typ. Typ. 2θ1/2 APHK1608RWC/Z WHITE (InGaN) WATER CLEAR 380 700 1700 90° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C DC Forward Current IF 30 mA Note4 IFM 100 mA Peak Forward Current Thermal resistance Rth JA 400 °C/W Note5 Junction/ambient Rth JS 150 °C/W Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 2 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥16 mm per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 Note1 0.31 - X IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 Note1 0.31 - Y IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] 2.6 Note2 Forward Voltage IF=20mA [Typ.] 3.2 V VF Forward Voltage IF=20mA [Max.] 4.0 Reverse Current (VR=5V) [Typ.] 0.01 IR μA Reverse Current (VR=5V) [Max.] 10 Temperature coefficient of x -3 TC x -0.1 10 /°C IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of y -3 TCy -0.2 10 /°C IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of VF TCV -2.5 mV/°C IF=20mA, -10°C≤ T≤100°C [Typ.] Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ± 0.1V. SPEC NO: DSAH0168 REV NO: V.2 DATE: JUN/08/2007 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000651 Brightness codes Note1 Note2 luminous Intensity Φv (mlm) Iv (mcd) @ 20 mA @ 20 mA Code. Min. Max. Typ. R 380 550 1270 S 480 750 1720 T 650 1100 2380 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APHK1608RWC/Z SPEC NO: DSAH0168 REV NO: V.2 DATE: JUN/08/2007 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000651 APHK1608RWC/Z SPEC NO: DSAH0168 REV NO: V.2 DATE: JUN/08/2007 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000651 Color Codes APHK1608RWC/Z White CIE 0.44 0.43 0.42 0.41 0.40 0.39 c1 0.38 0.37 0.36 c0 b4 0.35 0.34 0.33 b3 b1 0.32 0.31 b2 0.30 0.29 a1 0.28 a0 0.27 0.26 0.25 0.24 0.23 0.22 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 a0 a1 b1 X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264 X 0.283 0.330 0.330 0.287 Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267 Y 0.305 0.360 0.339 0.295 Reference CCT: 14000~9000k Reference CCT: 14000~9000k Reference CCT: 9000~5600k b2 b3 b4 X 0.287 0.330 0.330 0.296 X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306 Y 0.295 0.339 0.318 0.276 Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332 Reference CCT: 9000~5600k Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 c1 X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330 Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360 Reference CCT: 5600~4600k Reference CCT: 6000~4600k SPEC NO: DSAH0168 REV NO: V.2 DATE: JUN/08/2007 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000651 APHK1608RWC/Z Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH0168 REV NO: V.2 DATE: JUN/08/2007 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000651 PACKING & LABEL SPECIFICATIONS APHK1608RWC/Z SPEC NO: DSAH0168 REV NO: V.2 DATE: JUN/08/2007 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000651