KINGBRIGHT APTB1615EYC

1.6x1.5mm BI-COLOR SMD CHIP LED LAMP APTB1615EYC HIGH EFFICIENCY RED YELLOW Features Description
1.6mmx1.5mm SMT LED, 0.7mm THICKNESS. The High Efficiency Red source color devices are
LOW POWER CONSUMPTION. made with Gallium Arsenide Phosphide on Gallium
WIDE VIEWING ANGLE. Phosphide Orange Light Emitting Diode.
IDEAL FOR BACKLIGHT AND INDICATOR. The Yellow source color devices are made with
VARIOUS COLORS AND LENS TYPES AVAILABLE. Gallium Arsenide Phosphide on Gallium Phosphide
PACKAGE : 2000PCS / REEL. Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1084 REV NO: V.2 DATE: MAR/02/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP:1203002084 Selection Guide Iv (mcd) V i e w i n g @ 20mA Angle Part No. Dice Lens Type Min. Max. 2 θ θ θ θ 1/2 HIGH EFFICIENCY RED (GaAsP/GaP) 4 12 APTB1615EYC WATER CLEAR 120° YELLOW (GaAsP/GaP) 2.6 8 Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions High Efficiency Red 627 Peak Wavelength nm IF=20mA λpeak Yellow 590 High Efficiency Red 625 λD Dominant Wavelength nm IF=20mA Yellow 588 High Efficiency Red 45 Δλ1/2 Spectral Line Half-width nm IF=20mA Yellow 35 High Efficiency Red 15 C Capacitance pF VF=0V;f=1MHz Yellow 20 High Efficiency Red 2.0 2.5 VF Forward Voltage V IF=20mA Yellow 2.1 2.5 IR Reverse Current All 10 uA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Yellow Units Power dissipation 105 105 mW DC Forward Current 30 30 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1084 REV NO: V.2 DATE: MAR/02/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP:1203002084 APTB1615EYC High Efficiency Red SPEC NO: DSAD1084 REV NO: V.2 DATE: MAR/02/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP:1203002084 Yellow SPEC NO: DSAD1084 REV NO: V.2 DATE: MAR/02/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP:1203002084 APTB1615EYC SMT Reflow Soldering Instructions Number of reflow process shall be 2 times or less and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD1084 REV NO: V.2 DATE: MAR/02/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP:1203002084