KINGBRIGHT APTF1616QBDSURKCGKC

1.6x1.6mm FULL-COLOR SURFACE MOUNT LED Part Number: APTF1616QBDSURKCGKC ATTENTION Blue OBSERVE PRECAUTIONS Hyper Red FOR HANDLING Green ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 1.6mmX1.6mm SMT LED, 0.7mm thickness. The Blue source color devices are made with InGaN Light z Low power consumption. Emitting Diode. z Can produce any color in visible spectrum, including The Hyper Red source color devices are made with Al- white light. GaInP on GaAs substrate Light Emitting Diode. z Package : 2000pcs / reel. The Green source color devices are made with AlGaInP on z Moisture sensitivity level : level 3. GaAs substrate Light Emitting Diode. z RoHS compliant. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ8753 REV NO: V.3 DATE: APR/20/2011 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008662 Selection Guide Iv (mcd) [2] Viewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 Blue (InGaN) 55 80 APTF1616QBDSURKCGKC Hyper Red (AlGaInP) Water Clear 120 250 120° Green (AlGaInP) 30 55 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Blue 468 λpeak Peak Wavelength Hyper Red 650 nm IF=20mA Green 574 Blue 470 λD [1] Dominant Wavelength Hyper Red 630 nm IF=20mA Green 570 Blue 25 Δλ1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA Green 20 Blue 100 C Capacitance Hyper Red 35 pF VF=0V;f=1MHz Green 15 Blue 3.3 4 VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA Green 2.1 2.5 Blue 50 IR Reverse Current Hyper Red 10 uA VR=5V Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Hyper Red Green Units Power dissipation 120 75 75 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 150 185 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ8753 REV NO: V.3 DATE: APR/20/2011 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008662 APTF1616QBDSURKCGKC Blue SPEC NO: DSAJ8753 REV NO: V.3 DATE: APR/20/2011 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008662 Hyper Red SPEC NO: DSAJ8753 REV NO: V.3 DATE: APR/20/2011 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008662 Green SPEC NO: DSAJ8753 REV NO: V.3 DATE: APR/20/2011 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008662 APTF1616QBDSURKCGKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern Reel Dimension (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAJ8753 REV NO: V.3 DATE: APR/20/2011 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008662 PACKING & LABEL SPECIFICATIONS APTF1616QBDSURKCGKC SPEC NO: DSAJ8753 REV NO: V.3 DATE: APR/20/2011 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203008662