KINGBRIGHT APTF1616SEEVGAPBAC

1.6x1.6mm FULL-COLOR SURFACE MOUNT LED Part Number: APTF1616SEEVGAPBAC PRELIMINARY SPEC ATTENTION Hyper Red OBSERVE PRECAUTIONS Green FOR HANDLING Blue ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 1.6mmX1.6mm SMT LED, 0.7mm thickness. The Hyper Red source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z One red, one green and one blue chips in one package. The Green source color devices are made with InGaN on G- z Can produce any color in visible spectrum, including SiC Light Emitting Diode. white light. The Blue source color devices are made with InGaN z Package : 2000pcs / reel. on SiC Light Emitting Diode. z Moisture sensitivity level : level 3. Static electricity and surge damage the LEDS. z RoHS compliant. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subjected to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428 Selection Guide Iv (mcd) [2] V iewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 Hyper Red (AlGaInP) 180 400 APTF1616SEEVGAPBAC WATER CLEAR Green (InGaN) 70 180 120° Blue (InGaN) 10 40 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Hyper Red 630 λpeak Peak Wavelength Green 520 nm IF=20mA Blue 468 Hyper Red 621 λD [1] Dominant Wavelength Green 525 nm IF=20mA Blue 470 Hyper Red 20 Δλ1/2 Spectral Line Half-width Green 35 nm IF=20mA Blue 21 Hyper Red 25 C Capacitance Green 100 pF VF=0V;f=1MHz Blue 100 Hyper Red 2 2.5 VF [2] Forward Voltage Green 3.2 4 V IF=20mA Blue 3.2 4 Hyper Red 10 IR Reverse Current Green 10 uA VR=5V Blue 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Blue Units Power dissipation 75 120 120 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 195 100 100 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428 APTF1616SEEVGAPBAC Hyper Red SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428 Green SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428 Blue SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428 APTF1616SEEVGAPBAC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428 PACKING & LABEL SPECIFICATIONS APTF1616SEEVGAPBAC SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428