KINGBRIGHT APTF3216QBDZGSURKC

3.2mm x 1.6mm FULL-COLOR SURFACE MOUNT LED LAMP Part Number: APTF3216QBDZGSURKC ATTENTION Blue OBSERVE PRECAUTIONS Green FOR HANDLING Hyper Red ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2mmx1.6mm SMT LED, 0.75mm thickness. The Blue source color devices are made with InGaN Light z Low power consumption. Emitting Diode. z Can produce any color in visible spectrum, including The Green source color devices are made with InGaN white light. on Sapphire Light Emitting Diode. z Package : 2000pcs / reel. The Hyper Red source color devices are made with Al- z Moisture sensitivity level : level 3. GaInP on GaAs substrate Light Emitting Diode. z RoHS compliant. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ8682 REV NO: V.3 DATE: APR/20/2011 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010186 Selection Guide Iv (mcd) [2] Viewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 Blue (InGaN) 55 80 APTF3216QBDZGSURKC Green (InGaN) Water Clear 200 350 120° Hyper Red (AlGaInP) 120 250 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Blue 468 λpeak Peak Wavelength Green 515 nm IF=20mA Hyper Red 650 Blue 470 λD [1] Dominant Wavelength Green 525 nm IF=20mA Hyper Red 630 Blue 25 Δλ1/2 Spectral Line Half-width Green 30 nm IF=20mA Hyper Red 28 Blue 100 C Capacitance Green 45 pF VF=0V;f=1MHz Hyper Red 35 Blue 3.3 4 VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA Hyper Red 1.95 2.5 Blue 50 IR Reverse Current Green 50 uA VR=5V Hyper Red 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Green Hyper Red Units Power dissipation 120 102.5 75 mW DC Forward Current 30 25 30 mA Peak Forward Current [1] 150 150 185 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ8682 REV NO: V.3 DATE: APR/20/2011 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010186 APTF3216QBDZGSURKC Blue SPEC NO: DSAJ8682 REV NO: V.3 DATE: APR/20/2011 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010186 Green SPEC NO: DSAJ8682 REV NO: V.3 DATE: APR/20/2011 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010186 Hyper Red SPEC NO: DSAJ8682 REV NO: V.3 DATE: APR/20/2011 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010186 APTF3216QBDZGSURKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern Reel Dimension (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAJ8682 REV NO: V.3 DATE: APR/20/2011 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010186 PACKING & LABEL SPECIFICATIONS APTF3216QBDZGSURKC SPEC NO: DSAJ8682 REV NO: V.3 DATE: APR/20/2011 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010186