KINGBRIGHT APTK2012RWC/Z-F01

2.0x1.25mm SMD CHIP LED LAMP Part Number: APTK2012RWC/Z-F01 WHITE PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS Description FOR HANDLING ELECTROSTATIC The source color devices are made with InGaN Light DISCHARGE SENSITIVE Emitting Diode. DEVICES Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic Features glove when handling the LEDs. z2.0mmx1.25mm SMT LED, 0.75mm thickness. All devices, equipment and machinery must be electrically zLow power consumption. grounded. zWide viewing angle. zIdeal for backlight and indicator. zVarious colors and lens types available. Applications zPackage : 2000pcs / reel. z traffic signaling. zMoisture sensitivity level : level 4. z backlighting (illuminated advertising , general lighting). zElectrostatic discharge threshold (HBM):1000V. z interior and exterior automotive lighting. zTyp. color temperature:6500K z substitution of micro incandescent lamps. zColor coordinates:x=0.31,y=0.31 acc. to CIE1931(white). z reading lamps. zOptical efficiency:38.6 lm/W(typ.) z signal and symbol luminaire for orientation. zColor reproduction index:80 z marker lights (e.g. steps, exit ways, etc). zRoHS compliant. z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3790 REV NO: V.3 DATE: SEP/26/2008 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1204001002 Selection Guide luminous Intensity Viewing Note3 Note2 Note1 Φv (mlm) Angle @ 20mA Dice Lens Type Part No. Iv(mcd) @ 20mA Min. Typ. Min. Typ. 2θ1/2 APTK2012RWC/Z-F01 WHITE (InGaN) WATER CLEAR 480 800 1440 2471 110° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 111 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C DC Forward Current IF 30 mA Note4 IFM 100 mA Peak Forward Current Thermal resistance Note5 Rth JA 350 °C/W Junction/ambient Rth JS 130 °C/W Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 2 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 Note1 0.31 - X IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 Note1 0.31 - Y IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] 2.7 Note2 Forward Voltage IF=20mA [Typ.] 3.2 V VF Forward Voltage IF=20mA [Max.] 3.7 Reverse Current (VR=5V) [Typ.] 0.01 IR μA Reverse Current (VR=5V) [Max.] 10 Temperature coefficient of x -3 TC x -0.1 10 /°C IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of y -3 TCy -0.2 10 /°C IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of VF TCV -2.5 mV/°C IF=20mA, -10°C≤ T≤100°C [Typ.] Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAH3790 REV NO: V.3 DATE: SEP/26/2008 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1204001002 Brightness codes Note1 Note2 luminous Intensity Φv (mlm) Iv(mcd) @ 20mA @ 20mA Code. Min. Max. Typ. S 480 750 1852 T 650 1100 2338 U 900 1500 3224 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APTK2012RWC/Z-F01 SPEC NO: DSAH3790 REV NO: V.3 DATE: SEP/26/2008 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1204001002 APTK2012RWC/Z-F01 SPEC NO: DSAH3790 REV NO: V.3 DATE: SEP/26/2008 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1204001002 APTK2012RWC/Z-F01 White CIE 0.40 c0 0.35 b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x Rank a2 Rank a0 X 0.263 0.282 0.265 0.242 X 0.282 0.298 0.286 0.265 Y 0.213 0.245 0.265 0.226 Y 0.245 0.271 0.299 0.265 Rank b2 Rank b1 X 0.298 0.313 0.306 0.286 X 0.313 0.329 0.329 0.306 Y 0.271 0.296 0.332 0.299 Y 0.296 0.325 0.371 0.332 Rank c0 X 0.329 0.358 0.363 0.329 Y 0.325 0.372 0.400 0.371 SPEC NO: DSAH3790 REV NO: V.3 DATE: SEP/26/2008 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1204001002 y APTK2012RWC/Z-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications Reel Dimension (Units : mm) SPEC NO: DSAH3790 REV NO: V.3 DATE: SEP/26/2008 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1204001002 PACKING & LABEL SPECIFICATIONS APTK2012RWC/Z-F01 SPEC NO: DSAH3790 REV NO: V.3 DATE: SEP/26/2008 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1204001002