Part Number :KRB031 PCB TYPE PHOTOINTERRUPTER *Features � Ultra-compact with a 6.0mm width photointerrupter and 3mm width slot. � PCB surface mounting type. � High resolution with a 0.5mm width aperture. � Moisture sensitivity level : level 4. � RoHS compliant. *Dimensions Note:All units are in millimeters unless otherwise indicated. Unless otherwise.,the tolerances are ±0.15mm. SPEC NO: DSAE6490 REV NO: V.13 DATE: JUN/22/2016 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP: 1207000004 Kingbright Part Number :KRB031 *Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Rating Unit Forward current[1] IF 25 mA Reverse voltage VR 5 V Power dissipation PD 35 mW Input Peak Forward Current (Pulse Width <100uS, IFP 1 A Duty Cycle=1%) Collector-emitter voltage VCEO 20 V Emitter-collector voltage VECO 5 V Output Collector current IC 20 mA Collector power dissipation PC 75 mW Operating temperature Topr -40~+85 °C Storage temperature Tstg -40~+90 °C Soldering temperature[2] Tsol 260 °C Manual soldering[2] Tsol 300 °C Notes: 1.Refer to the temperature ratingchart if the ambient temperature exceeds 25°C. 2.Complete soldering within 10 seconds for reflow soldering and within 3 seconds for manual soldering. *Electrical / Optical Characteristics at TA=25°C Value Parameter Symbol Conditions Min. Typ. Max. Forward voltage VF - 1.1V 1.3V IF=5mA Input Reverse current IR - - 10μA VR=5V Peak Wavelength - 940nm - IF=20mA λp Collector current IC IF=5mA,VCE=5V 50μA 150μA 500μA Collector dark current ID - - 100nA VCE =10V,0LX Output Collector-emitter saturation voltage VCE(sat) - 0.1V 0.4V IC=50μA, IF=20mA Peak spectral sensitivity wavelength λp - 920nm - - VCC=5V, Rise time tr - 8μsec - RL=1KΩ Fall time tf - 10μsec - IC=100μA SPEC NO: DSAE6490 REV NO: V.13 DATE: JUN/22/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP: 1207000004 Kingbright Part Number :KRB031 SPEC NO: DSAE6490 REV NO: V.13 DATE: JUN/22/2016 PAGE: 3 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP: 1207000004 Kingbright Part Number :KRB031 SPEC NO: DSAE6490 REV NO: V.13 DATE: JUN/22/2016 PAGE: 4 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP: 1207000004 Kingbright Part Number :KRB031 Reel Dimensions (Units: mm) Tape Specifications (Units: mm) SPEC NO: DSAE6490 REV NO: V.13 DATE: JUN/22/2016 PAGE: 5 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP: 1207000004 Kingbright Part Number :KRB031 PACKING & LABEL SPECIFICATIONS KRB031 Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes SPEC NO: DSAE6490 REV NO: V.13 DATE: JUN/22/2016 PAGE: 6 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP: 1207000004 Kingbright