Part Number :KRC011 SUBMINIATURE , HIGH SENSITIVITY PHOTOINTERRUPTER *Features 1.Compact and thin. 2.Visible light cut-off type. 3.High sensitivity. 4.Side irradiance. 5.Package: 3000pcs/Reel. 6.Moisture sensitivity level : level 4. 7.New PCB Production Process. 8.RoHS compliant. *Applications Cassette tape recorders,VCRs toys. Various microcomputerized control equipment. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the data- *Absolute Maximum Ratings sheet are subject to change without prior notice. Parameter Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 5 V Input Power Dissipation Pd 37.5 mW Peak Forward Current (Pulse Width <100uS,Duty Cycle=1%) IFP 1 A Collector-emitter voltage VCEO 30 V Emitter-Collector voltage VECO 5 V Output Collector current IC 20 mA Collector Power Dissipation PC 75 mW Operating temperature Topr -25~+65 °C Storage temperature Tstg -25~+65 °C Soldering temperature Tsol 260 °C (1/16 inch from body for 5 seconds) Note: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAE2701 REV NO: V.15 DATE: OCT/18/2016 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP:1207000002 Kingbright Part Number :KRC011 Electrical / Optical Characteristics at TA=25°C Parameter Symbol Conditions Min. Typ. Max. Unit Forward voltage VF IF=20mA 1.0 1.2 1.5 V Input Reverse current IR VR=5V _ _ 10 μA Peak Wavelength λp IF=20mA - 940 - nm -9 -7 Output Collector dark current ICEO VCE =20V _ 10 10 A Viewing Angle θ - - 90 - ° IC=0.1mA, Collector-emitter saturation voltage VCE(SAT) _ 0.1 0.4 V IF=20mA VCE=5V, Collector current [1] I 10 _ 300 μA C IF=20mA Transfer VCE=5V, Charac- Leak current [2] I _ _ 5 μA LEAK IF=20mA teristics VCE=2V, Rise time T _ 20 _ uS R IC=100uA Response time RL=1KΩ Fall time T _ 20 _ uS F d=3.8mm Notes: 1.The condition and arrangement of the reflective object are shown below.Fig.1,Fig.2,Fig.3,Fig.4,Fig.5 and Fig.9 in the same condition. 2.Without reflective object. SPEC NO: DSAE2701 REV NO: V.15 DATE: OCT/18/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP:1207000002 Kingbright Part Number :KRC011 SPEC NO: DSAE2701 REV NO: V.15 DATE: OCT/18/2016 PAGE: 3 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP:1207000002 Kingbright Part Number :KRC011 Tape Specifications (Units : mm) SPEC NO: DSAE2701 REV NO: V.15 DATE: OCT/18/2016 PAGE: 4 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP:1207000002 Kingbright Part Number :KRC011 SPEC NO: DSAE2701 REV NO: V.15 DATE: OCT/18/2016 PAGE: 5 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP:1207000002 Kingbright Part Number :KRC011 PACKING & LABEL SPECIFICATIONS KRC011 Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes SPEC NO: DSAE2701 REV NO: V.15 DATE: OCT/18/2016 PAGE: 6 OF 6 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: W.Q.Zhong ERP:1207000002 Kingbright