56.8mm (2.3 INCH) 16 SEGMENT SINGLE DIGIT ALPHANUMERIC DISPLAY Part Number: PSA23-11YWA Yellow Features Description z 2.3 inch character height. The Yellow source color devices are made with Gallium z Low current operation. Arsenide Phosphide on Gallium Phosphide Yellow Light z High contrast and light output. Emitting Diode. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAN0642 REV NO: V.1A DATE: JUN/21/2013 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000095 Selection Guide Iv (ucd) [1] @ 10mA Part No. Dice Lens Type Description Min. Typ. 3600 7000 Common Anode, Rt. PSA23-11YWA Yellow (GaAsP/GaP) White Diffused Hand Decimal. *900 *2200 Note: 1.Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λ peak Peak Wavelength Yellow 590 nm IF=20mA λ D[1] Dominant Wavelength Yellow 588 nm IF=20mA Δλ 1/2 Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz A1,A2,D1,D2,P,K 4.2 5.0 VF[2] Forward Voltage B,C,E,F,G,H,J,L,M,N Yellow V IF=20mA DP 2.1 2.5 A1,A2,D1,D2,P,K 10 VR = 5V Reverse Current IR B,C,E,F,G,H,J,L,M,N Yellow 20 uA VR = 5V (Per chip) 10 VR = 5V DP Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Yellow Units A1,A2,D1,D2,P,K 150 Power dissipation B,C,E,F,G,H,J,L,M,N 300 mW 75 DP A1,A2,D1,D2,P,K 30 DC Forward Current B,C,E,F,G,H,J,L,M,N 60 mA 30 DP A1,A2,D1,D2,P,K 140 Peak Forward Current [1] B,C,E,F,G,H,J,L,M,N 280 mA 140 DP A1,A2,D1,D2,P,K 5 Reverse Voltage 5 V B,C,E,F,G,H,J,L,M,N (Per chip) 5 DP Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAN0642 REV NO: V.1A DATE: JUN/21/2013 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000095 YELLOW Yellow PSA23-11YWA Note:the curves are on the DP. SPEC NO: DSAN0642 REV NO: V.1A DATE: JUN/21/2013 PAGE: 3 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000095 Yellow Note:the curves are on the segment b,c,e,f,g,h,j,l,m,n. SPEC NO: DSAN0642 REV NO: V.1A DATE: JUN/21/2013 PAGE: 4 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000095 Yellow Note:the curves are on the segment a1,a2,d1,d2,p,k. SPEC NO: DSAN0642 REV NO: V.1A DATE: JUN/21/2013 PAGE: 5 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000095 PACKING & LABEL SPECIFICATIONS PSA23-11YWA SPEC NO: DSAN0642 REV NO: V.1A DATE: JUN/21/2013 PAGE: 6 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000095 SPEC NO: DSAN0642 REV NO: V.1A DATE: JUN/21/2013 PAGE: 7 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000095 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAN0642 REV NO: V.1A DATE: JUN/21/2013 PAGE: 8 OF 8 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1311000095