KINGBRIGHT W7104UVC

T-1 (3mm) SOLID STATE LAMP ATTENTION P/N: W7104UVC ULTRAVIOLET OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES PRELIMINARY SPEC Features Description The source color devices are made with InGaN on SiC
LOW POWER CONSUMPTION. Light Emitting Diode.
POPULAR T-1 DIAMETER PACKAGE. This device radiates intense ultraviolet (UV) light when
GENERAL PURPOSE LEADS. operated .Most of the UV light emitted is not visible.
RELIABLE AND RUGGED. Exposure to UV radiation can be harmful to your health.
LONG LIFE - SOLID STATE RELIABILITY. Protect your eyes and skin during operation.
AVAILABLE ON TAPE AND REEL. Do not look directly at the device during operation. Exposure
RoHS COMPLIANT. to UV light ,even for a brief period, can damage your eyes. Do not operate the device unless you have had proper safety training and take appropriate precautions. Do not permit children or untrained personnel to operate the device. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAD2148 REV NO: V.3 DATE: JAN/18/2006 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1101006512 Selection Guide ΦΦ Φ Φe (mW) V i e w i n g @ 20mA Angle Part No. Dice Lens Type Min. Typ. 2θθ θ θ1/2 W7104UVC ULTRAVIOLET ( InGaN ) WATER CLEAR 7 20 34° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Ultraviolet 400 nm IF=20mA λD Dominant Wavelength Ultraviolet 395 nm IF=20mA Δλ1/2 Spectral Line Half-width Ultraviolet 26 nm IF=20mA C Capacitance Ultraviolet 30 pF VF=0V;f=1MHz VF Forward Voltage Ultraviolet 3.8 4.2 V IF=20mA IR Reverse Current Ultraviolet 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Ultraviolet Units Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAD2148 REV NO: V.3 DATE: JAN/18/2006 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1101006512 Ultraviolet W7104UVC SPEC NO: DSAD2148 REV NO: V.3 DATE: JAN/18/2006 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1101006512 PACKING & LABEL SPECIFICATIONS W7104UVC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters SPEC NO: DSAD2148 REV NO: V.3 DATE: JAN/18/2006 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1101006512