KINGBRIGHT WP5604RWW/SD/Z

OVAL SOLID LAMP Part Number: WP5604RWW/SD/Z WHITE PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE Description SENSITIVE DEVICES The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic Features glove when handling the LEDs. All devices, equipment and machinery must be electrically zUltra brightness. grounded. zOutstanding material efficiency. zReliable and rugged. zIc compatible/low current capability. Applications zMoisture sensitivity level : level 1. z Furniture lighting zElectrostatic discharge threshold (HBM):1000V. z Outdoor displays zTyp. color temperature:6500K. z Optical indicators zColor coordinates:x=0.31,y=0.31 acc. to z Signal and symbol luminaire CIE1931(white). z Marker lights (e.g. steps, exit ways, etc.) zOptic efficiency:35.9 lm/W (typ) z Lighting for special effects (e.g. starry sky) zColor reproduction index:80. z Substitute for miniature flashlight zRoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH1150 REV NO: V.3 DATE: AUG/16/2008 PAGE: 1 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:D.M.Su ERP: 1101020220 Selection Guide Note2 Note3 Viewing luminous Intensity Φv (mlm) Note1 Iv(mcd) @ 20mA @ 20mA Angle Part No. Dice Lens Type Min. Typ. Typ. 2θ1/2 65°(H) WP5604RWW/SD/Z WHITE (InGaN) WHITE SEMI DIFFUSED 900 2500 2300 35°(V) Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 111 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C DC Forward Current IF 30 mA Note4 Peak Forward Current IFM 100 mA Thermal resistance Note5 Rth JA 350 °C/W Junction/ambient Rth JS 130 °C/W Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 2 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥16 mm per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 Note1 0.31 - X IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 Note1 0.31 - Y IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] 2.7 Note2 Forward Voltage IF=20mA [Typ.] VF 3.2 V Forward Voltage IF=20mA [Max.] 3.7 Reverse Current (VR=5V) [Typ.] 0.01 IR μA Reverse Current (VR=5V) [Max.] 10 Temperature coefficient of x -3 TC x -0.1 10 /°C IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of y -3 TCy -0.2 10 /°C IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of VF TCV -2.5 mV/°C IF=20mA, -10°C≤ T≤100°C [Typ.] Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ± 0.1V. SPEC NO: DSAH1150 REV NO: V.3 DATE: AUG/16/2008 PAGE: 2 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:D.M.Su ERP: 1101020220 Brightness codes Note1 Note2 luminous Intensity Φv (mlm) Iv(mcd) @ 20mA @ 20mA Code. Min. Max. Typ. U 900 1500 1200 V 1200 1800 1500 W 1500 2100 1800 X 1800 2500 2100 Y 2200 3000 2500 Z 2500 3300 2900 ZA 2800 3800 3400 ZB 3300 4500 3900 ZC 3800 5500 4500 ZD 4700 6500 5300 ZE 5700 7500 6700 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White WP5604RWW/SD/Z SPEC NO: DSAH1150 REV NO: V.3 DATE: AUG/16/2008 PAGE: 3 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:D.M.Su ERP: 1101020220 White WP5604RWW/SD/Z SPEC NO: DSAH1150 REV NO: V.3 DATE: AUG/16/2008 PAGE: 4 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:D.M.Su ERP: 1101020220 WP5604RWW/SD/Z White CIE 0.40 c0 0.35 b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x Rank a2 Rank a0 X 0.263 0.282 0.265 0.242 X 0.282 0.298 0.286 0.265 Y 0.213 0.245 0.265 0.226 Y 0.245 0.271 0.299 0.265 Rank b2 Rank b1 X 0.298 0.313 0.306 0.286 X 0.313 0.329 0.329 0.306 Y 0.271 0.296 0.332 0.299 Y 0.296 0.325 0.371 0.332 Rank c0 X 0.329 0.358 0.363 0.329 Y 0.325 0.372 0.400 0.371 SPEC NO: DSAH1150 REV NO: V.3 DATE: AUG/16/2008 PAGE: 5 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:D.M.Su ERP: 1101020220 y WP5604RWW/SD/Z Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) SPEC NO: DSAH1150 REV NO: V.3 DATE: AUG/16/2008 PAGE: 6 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:D.M.Su ERP: 1101020220 PACKING & LABEL SPECIFICATIONS WP5604RWW/SD/Z SPEC NO: DSAH1150 REV NO: V.3 DATE: AUG/16/2008 PAGE: 7 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:D.M.Su ERP: 1101020220 SPEC NO: DSAH1150 REV NO: V.3 DATE: AUG/16/2008 PAGE: 8 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:D.M.Su ERP: 1101020220 SPEC NO: DSAH1150 REV NO: V.3 DATE: AUG/16/2008 PAGE: 9 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN:D.M.Su ERP: 1101020220