KINGBRIGHT WP7678C2QBC/D

SUPER FLUX LED LAMP PRELIMINARY SPEC Part Number: WP7678C2QBC/D Technical Data ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Features: Benefits: * High Luminance output. *Outstanding Material Efficiency. * Design for High Current Operation. *Electricity savings. * Uniform Color. * Low Power Consumption. *Maintenance savings. * Low Thermal Resistance. *Reliable and Rugged. * Low Profile. * Packaged in tubes for use with automatic insertion equipment. Typical Applications: * Soldering methods: Wave soldering . * RoHS Compliant. *Automotive Exterior Lighting. *Electronic Signs and Signals. *Specialty Lighting. SPEC NO: DSAH3821 REV NO: V.5 DATE: MAY/14/2008 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1101011875 Outline Drawings Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. Absolute Maximum Ratings at TA=25°C PARAMETER QB/D UNITS DC Forward Current 30 mA Power dissipation 126 mW Reverse Voltage 5 V Operating Temperature -40 To +85 °C Storage Temperature -55 To +85 °C Lead Solder Temperature[1] 260°C For 5 Seconds 1.1.5mm[0.06inch]below seating plane. NO Reflow soldering . SPEC NO: DSAH3821 REV NO: V.5 DATE: MAY/14/2008 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1101011875 Selection Guide Iv(cd)[1] Фv(lm)[1] Viewing Angle[2] Part No. LED COLOR @30mA @30mA 2θ1/2 Min. Typ. Typ. Typ. WP7678C2QBC/D Blue (AlInGaN) 1.2 2.5 1.0 40° Notes: 1.Luminous intensity is measured with an integrating sphere after the device has stabilized:Luminous Intensity/ Luminous Flux: +/-15%. 2.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Optical Characteristics at TA=25°C IF=30mA Rθj-a=200°C/W PEAK DOMINANT[1] SPECTRAL LINE DEVICE WAVELENGTH WAVELENGTH WAVELENGTH λPEAK (nm) λDOM (nm) Δλ1/2(nm) TYPE TYP. TYP. TYP. QB/D 468 470 25 Note: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device; Wavelength: +/-1nm. Electrical Characteristics at TA=25°C FORWARD VOLTAGE [1] REVERSE CURRENT CAPACITANCE THERMAL VF (VOLTS) IR (uA) C (pF) RESISTANCE DEVICE @ @ @ Rθj -pin IF=30mA VR=5V VF=0V F=1MHZ °C/W TYPE TYP. MAX. MAX. TYP. TYP. QB/D 3.5 4.2 10 100 180 Note: 1. Forward Voltage: +/-0.1V. SPEC NO: DSAH3821 REV NO: V.5 DATE: MAY/14/2008 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1101011875 Figures SPEC NO: DSAH3821 REV NO: V.5 DATE: MAY/14/2008 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1101011875 PACKING & LABEL SPECIFICATIONS WP7678C2QBC/D SPEC NO: DSAH3821 REV NO: V.5 DATE: MAY/14/2008 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1101011875