KINGBRIGHT WP914CK/4GD

2x3mm QUAD-LEVEL LED INDICATOR WP914CK/4GD GREEN Description Features The Green source color devices are made with
QUAD-LEVEL DESIGN, SAVE BOARD SPACE. Gallium Phosphide Green Light Emitting Diode.
DIFFERENT COLOR COMBINATION AVAILABLE .
BLACK CASE ENHANCES CONTRAST.
UL RATING : 94V-0.
HOUSING MATERIAL: TYPE 66 NYLON.
RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAE9429 REV NO: V.2 DATE: APR/16/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1102002264 Selection Guide Iv (mcd) V i e w i n g @ 10mA Angle Part No. Dice Lens Type 2θ θ1/2 Min. Typ. θθ WP914CK/4GD GREEN (GaP) GREEN DIFFUSED 1.8 6 100° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Peak Wavelength Green 565 nm IF=20mA λpeak λD Dominant Wavelength Green 568 nm IF=20mA Δλ1/2 Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAE9429 REV NO: V.2 DATE: APR/16/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1102002264 Green WP914CK/4GD If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAE9429 REV NO: V.2 DATE: APR/16/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1102002264 PACKING & LABEL SPECIFICATIONS WP914CK/4GD SPEC NO: DSAE9429 REV NO: V.2 DATE: APR/16/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1102002264