440 MHz 7dBi Gain Omnidirectional Antenna FG4405 FIBERGLASS BASE STATION ANTENNAS FEATURE INDUSTRY LEADING DESIGN COMPONENTS THAT PERFORM IN EXTREME CONDITIONS The Laird FG4405 omnidirectional base station antenna incorporates a collinear design that is enclosed in high density fiberglass, which is covered with a protective ultraviolet inhibiting coating. The radiating elements are carefully phased to provide maximum gain in the horizontal plane. The mounting sleeves are tuned to eliminate RF currents from the transmission line, resulting in a “cold” sleeve that allows for greater freedom in mounting. The antenna’s high quality and well-focused beam provides the best efficiency with highest gain. FEATURES MARKETS • High gain 5 dBd (7dBi) • Omnidirectional outdoor antennas used in commercial, public safety, and government • Every FG fiberglass base antenna is tested on a applications around the globe. network analyzer before shipping to assure the best performance • Typical applications include land based and marine radio and voice and data transmission • Custom UV protection coating • Durable gold anodized sleeve and cap with N-female connector • FedEx/UPS Shippable ELECTRICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS Frequency Range 440 MHz Height 76.5” VSWR < 2.0:1 Max Diameter 1.310” Nominal Gain 5 dBd (7 dBi ) Weight < 6 lbs Maximum Power 100 W Rated Wind Velocity 125 mph (210 kph) Nominal Impedance 50Ω Rated Wind Velocity 85 mph (137 kph) (with 0.5” radial ice) Polarization Vertical Lateral Thrust @ 125 57 lbs. (26 kg) Pattern Omnidirectional mph WIND VELOCITY Half-Power Beamwidth 40° x 360° Equivalent Flat Plate Area ( sq. ft.) 0.6959 sq. ft (Elevation° x Azimuth°) FM2 Mounting Kit, Coaxial Cable Length & Type None Mounting Information (Sold separately) Termination N-Female connector Operating Temperature -30°C to +80°C Lightning Arrestor LABH350NN Lightning Protection (Sold Separately) ELEVATION PATTERN (Y, Z OR H-PLANE) 0 30 330 -2 -10 300 60 -20 -30 0 90 270 Lightning Arrestor FM2 Mounting Kit (Sold LABH350NN separately) (Sold Separately) 240 120 - Normalize d to 5 dBd 150 210 180 Laird warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to conditions and limitations Laird will, at its option, either repair or replace any part of its products that prove defective by reason of improper workmanship or Americas: +1.847 839.6925 materials. This limited warranty is in force for the useful lifetime of the original end product into which the Laird product is installed. Useful lifetime of the IAS-AmericasEastSales@lairdtech.com original end product may vary but is not to exceed five (5) years from the original date of the end product purchase. Europe: +44.1628.858941 ANT-DS-FG4405 0816 IAS-EUSales@lairdtech.com Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and aplication of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, Asia: IAS-AsiaSales@lairdtech.com merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2016 Laird. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird or an www.lairdtech.com affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.