HIGH PRESSURE CONNECTORS W SERIES ® ® Precision modular connectors to suit your application Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in more than 80 countries with the help of over 40 subsidiaries and distributors. Over 75000 connectors The modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable of handling cable diameters up to 30 mm and for up to 114 contacts. This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommuni- cations and military. LEMO’s Push-Pull Self-Latching Connection System (not shown in this catalogue) This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute security against vibration, shock or pull on the cable, and facilitates operation in a very limited space. The LEMO self-latching system allows the connector to be mated by simply pushing the plug axially into the socket. Once firmly latched, connection cannot be broken by pulling on the cable or any other component part other than the outer release sleeve. When required, the connector is disengaged by a single axial pull on the outer release sleeve. This first disen- gages the latches and then withdraws the plug from the socket. UL Recognition LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO connector, cable and your equipment) will be easier because LEMO connectors are recognized. CE marking CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or several European safety directives. CE marking applies to complete products or equipment, but not to electrome- chanical components, such as connectors. RoHS LEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parliament and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical and electronic equipment marketed in Europe. www.lemo.com ® ® W Series W Series connectors have been developed for utilisation where protection must be guaranteed under high pressures of liquids. The basic elements, insulators, contacts and clamping system are from the B series. The push-pull latching system ® has been replaced by a screw coupling system with watertightness maintained by compression of an O-ring in FPM (Viton ) according to the triangular shaped cavity principle. There are multiple application possibilities ranging from nuclear physics to the petroleum industry. After cable assembly, the rear part must be covered by an adhesive heatshrink boot in order to ensure watertightness on the cable side. W series connectors provide the following main features: – multipole types from 2 to 64 contacts – fibre optic or mixed types available upon request – solder or crimp contacts – keying system («G» key standard) for connector alignment – multiple key options to avoid cross mating of similar connectors – 360° screening for full EMC shielding – rugged housing for extreme working conditions. Interconnections Models (page 3) Straight plugs Fixed socket Free sockets FVG PVG FVG EVG PVG FVG PVG Vacuumtight models (page 6) Fixed sockets HVG HRG Part Section Showing Internal Components Straight plug 1 outer shell Fixed socket 3 2 4 1 7 5 6 8 7 6 2 3 1 5 9 11 12 10 4 2 coupling nut 3 circlip 1 outer shell 4 collet nut 2 earthing crown 5 split insert carrier 3 retaining ring 6 o-ring 4 hexagonal nut insulator 7 5 insulator male contact 8 female contact 6 earthing cone 9 O-ring 7 collet 10 gasket 11 DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the washer 12 information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice. www.lemo.com 1 ® ® Part Number Example Straight plug with cable collet F V A 2 W 3 1 9 C L A C 8 5 Model: (page 3) Alignment Key (page 2) 1) Variant: (page 16) Series: (page 3) Z = nut for fitting a bend relief Insert configuration: (page 8) Cable ø: (page 14) Housing: Collet type: C = brass chrome-plated C = cable collet S = stainless steel AISI 304 L K = oversize cable collet Insulator: Contact type: L = PEEK, for solder contacts A = male to solder Y = PEEK, for crimp contacts C = male to crimp FVA.2W.319.CLAC85 = straight plug with key (A), 2W series, multipole type with 19 contacts, outer shell in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 8.5 mm diameter cable. Fixed socket, vacuumtight H V G 2 W 3 0 6 C L L P V Model: (page 6) V = vacuumtight Alignment Key (page 2) Sealing epoxy resin: ® ® P = Araldite S = Stycast Series: (page 6) Contact type: Insert configuration: (page 8) L = female to solder Housing: Insulator: C = brass chrome-plated L = PEEK, for solder contacts S = stainless steel AISI 304 L Y = PEEK, for crimp contacts HVG.2W.306.CLLPV = fixed socket, nut fixing, key (G), 2W series, multipole type with 6 contacts, outer shell in chrome- ® plated brass, PEEK insulator, female solder contacts, potted with Araldite epoxy resin, vacuumtight. 1) Note: The «Variant» position in the reference is used to specify either the presence of a collet nut for fitting the bend relief. For models with collet nut for fitting the bend relief, a «Z» should be indicated and a bend relief can be ordered separately. An order for a connector with bend relief should thus include two part numbers. Alignment Key Alignment Key and Polarized Keying System W series connector model part numbers are composed of three letters. The LAST LETTER indicates the key position and the contact type (male or female). Front view of a socket Series Contact type Nb of Note keys 0W-5W Plug Socket G 1 0° male female l α 30° male female A 2 l α B 2 45° male female l l Available γ L 2 75° female male l On request 2 www.lemo.com α γ Ref. Angles ® ® Models Technical Characteristics Mechanical and Climatical Electrical Characteristics Value Standard Characteristics Value Standard Endurance > 1000 cycles IEC 60512-5 test 9a at 10 MHz > 95 dB IEC 60169-1-3 Shielding efficiency -20° C, +200° C Temperature range at 1 GHz > 80 dB IEC 60169-1-3 > 144h IEC 60512-6 test 11f 1) Salt spray corrosion test Note: in order to perform correctly and withstand the pressure, cable assembly shall be made according to instruction we recommand. See Protection index (mated) > IP 68 IEC 60529 page 19. Resistance to hydrostatic 1) ~ 30 bars IEC 60512-7 test 14d pressure (mated) Climatical category 20/200/21 IEC 60068-1 FVG Straight plug, key (G) or keys (A, B or L), cable collet Reference Dimensions (mm) ~L Model Series A B L M N S1 S3 S4 ~M S 3 S 4 S 1 FVG 0W 17.2 10.0 36.0 30.8 13.5 16 8 8 N FVG 1W 19.3 12.0 43.2 35.1 14.0 18 9 10 FVG 2W 23.5 16.0 52.5 43.0 15.5 22 12 13 FVG 3W 27.8 17.0 61.5 48.0 16.5 26 15 – FVG 4W 34.3 22.0 71.5 57.5 17.5 32 19 – FVG 5W 50.0 34.0 100.0 83.0 21.0 47 30 – 1) FVG Straight plug, key (G) or keys (A, B or L), oversize cable collet Reference Dimensions (mm) Model Series A B L M N S1 S2 S3 S4 ~L FVG 1W 19.3 14.5 56.5 48.3 14.0 18 12 12 10 ~M S 3 S 2 S 4 S 1 N FVG 2W 23.5 17.0 68.5 56.0 15.5 22 15 15 13 FVG 3W 27.8 22.0 80.5 67.0 16.5 26 19 19 – FVG 4W 34.3 36.0 105.5 91.5 17.5 32 30 32 – 1) Note: correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page 14). www.lemo.com 3 ø B ø B ø A ø A ® ® 1) FVG Straight plug, key (G) or keys (A, B or L), cable collet and nut for fitting a bend relief Reference Dimensions (mm) Model Series A B L M N S1 S3 S4 FVG 0W 17.2 10.0 36.0 30.8 13.5 16 7 8 ~L FVG 1W 19.3 12.0 43.2 35.1 14.0 18 9 10 ~M S 3 S 4 S 1 N FVG 2W 23.5 16.0 52.5 43.0 15.5 22 12 13 FVG 3W 27.8 17.0 60.5 46.9 16.5 26 15 – FVG 4W 34.3 22.0 71.5 57.5 17.5 32 19 – 1) Note: to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see pages 141 and 142 of the unipole/multipole catalog). 1) FVG Straight plug, key (G) or keys (A, B or L), cable collet with special coupling nut ~L ~M S 3 S 4 N Reference Dimensions (mm) Model Series A B L M N S3 S4 FVG 0W 17 8.9 36.0 29.8 13.5 8 8 1) Note: to order, add a «Y» at the end of the reference. EVG Fixed socket, nut fixing, key (G) or keys (A, B or L) Reference Dimensions (mm) Model Series A B e e1 E L N S1 S2 S3 L maxi EVG 0W 16.2 16.0 M12x1.0 M14x1.0 4.0 21.7 8.0 10.5 12.5 14 N EVG 1W 18.3 19.5 M14x1.0 M16x1.0 8.0 27.0 8.0 12.5 14.5 17 EVG 2W 22.5 21.8 M16x1.0 M20x1.0 9.0 30.7 9.0 14.5 18.5 19 EVG 3W 26.6 27.0 M20x1.0 M24x1.0 13.0 36.2 9.5 18.5 22.5 24 S 1 S 3 E maxi S 2 EVG 4W 32.8 34.2 M24x1.0 M30x1.0 15.0 40.2 9.5 22.5 28.5 30 EVG 5W 48.0 53.0 M38x1.5 M45x1.5 18.0 47.5 12.5 35.5 42.5 46 Panel cut-out (page 18) 4 www.lemo.com ø B ø B B e ø A ø A e 1 ø A ® ® PVG Free socket, key (G) or keys (A, B or L), cable collet Reference Dimensions (mm) Model Series A B e L S1 S2 S3 S4 PVG 0W – 8.9 M14x1.0 37.9 – 13.5 8 8 ~L PVG 1W 18.3 11.0 M16x1.0 45.0 16 14.5 9 – PVG 2W 22.5 14.0 M20x1.0 54.0 20 18.5 12 – PVG 3W 26.6 17.0 M24x1.0 65.0 24 22.5 15 – S 3 S 4 S 1 S 2 PVG 4W 32.8 22.0 M30x1.0 75.5 30 28.5 19 – PVG 5W 48.0 34.0 M45X1.5 103.0 45 42.5 30 – 1) PVG Free socket, key (G) or keys (A, B or L), oversize cable collet Reference Dimensions (mm) Model Series A B e L S1 S2 S3 S4 ~L PVG 1W 18.3 14.0 M16x1.0 58.0 16 14.5 12 12 PVG 2W 22.5 17.0 M20x1.0 67.0 20 18.5 15 15 PVG 3W 26.6 22.0 M24x1.0 84.0 24 22.5 19 19 PVG 4W 32.8 34.0 M30x1.0 109.5 30 28.5 32 30 S 3 S 4 S 1 S 2 1) Note: correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page 14). 1) PVG Free socket, key (G) or keys (A, B or L), cable collet and nut for fitting a bend relief Reference Dimensions (mm) Model Series A B e L S1 S2 S3 S4 PVG 0W – 8.9 M14x1.0 37.9 – 13.5 7 8 ~L PVG 1W 18.3 11.0 M16x1.0 45.0 16 14.5 9 – PVG 2W 22.5 14.0 M20x1.0 54.0 20 18.5 12 – PVG 3W 26.6 17.0 M24x1.0 64.0 24 22.5 15 – PVG 4W 32.8 22.0 M30x1.0 75.5 30 28.5 19 – S 3 S 4 S 1 S 2 1) Note: to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see pages 141 and 142 of the unipole/multipole catalog). www.lemo.com 5 ø B ø B ø B e e e ø A ø A ø A ® ® Vacuumtight models HRG and HVG socket models allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are made in a vacuumtight version. They are identified by an additional letter «V» at the end of the part number (certificate on request). Epoxy resin is used to seal these models and we are offering 2 different resins: ® a) Epoxy Araldite , for general purpose use, identify with letter «P» ® b) Epoxy Stycast , for oil and petrol industry, identify with the letter «S». Part number example: ® Vacuumtight socket potted with Araldite epoxy: HVG.0W.304.CLLPV ® Vacuumtight socket potted with Stycast epoxy: HVG.0W.304.CLLSV Technical Characteristics Mechanical and Climatical Characteristics Value Standard Characteristics Value Standard Endurance > 1000 cycles IEC 60512-5 test 9a 0W 60 bars IEC 60512-7 test 14d Humidity up to 95% at 60° C 1W 60 bars IEC 60512-7 test 14d Maximum 40 bars Temperature range (0W-1W) - 20° C/+100° C 2W IEC 60512-7 test 14d operating 2) Temperature range (2W to 5W) - 20° C/+80° C 3W 30 bars IEC 60512-7 test 14d pressure 15 bars Salt spray corrosion test > 144h IEC 60512-6 test 11f 4W IEC 60512-7 test 14d Climatical category 20/80/21 IEC 60068-1 5W 5 bars IEC 60512-7 test 14d 1) -7 -1 Leakage rate (He) < 10 mbar.l.s IEC 60512-7 test 14b 1) Note: For vacuumtight models. 2) this value corresponds to the maximum allowed pressure difference for the assembled socket if used in the unmated condition. HVG Fixed socket, nut fixing, key (G) or keys (A, B or L), vacuumtight Reference Dimensions (mm) Model Series A B e e1 E L N S1 S2 S3 HVG 0W 16.2 16.0 M12x1.0 M14x1.0 5.5 21.7 8.0 10.5 12.5 14 L maxi HVG 1W 18.3 19.5 M14x1.0 M16x1.0 11.5 27.0 8.0 12.5 14.5 17 N HVG 2W 22.5 21.8 M16x1.0 M20x1.0 12.0 30.7 9.0 14.5 18.5 19 HVG 3W 26.6 27.0 M20x1.0 M24x1.0 17.5 42.2 9.5 18.5 22.5 24 HVG 4W 32.8 34.2 M24x1.0 M30x1.0 20.0 48.2 9.5 22.5 28.5 30 S 1 S 3 E maxi S 2 HVG 5W 48.0 53.0 M38x1.5 M45x1.5 22.0 55.6 12.5 35.5 42.5 46 Panel cut-out (page 18) 6 www.lemo.com B e e 1 ø A ® ® HRG Fixed socket, nut fixing, key (G) or keys (A, B or L), hexagonal flange, vacuumtight L maxi N Reference Dimensions (mm) Model Series A B e e1 E L N S1 S3 S4 S 1 S 3 E maxi S 4 HRG 0W 18 16 M12x1.0 M14x1.0 5.5 21.7 8 10.5 14 17 Panel cut-out (page 18) www.lemo.com 7 B e e 1 ø A ® ® Insert configuration Other like fibre optic of mixed are available, please consult us. Multipole Solder contacts Contact Solder AWG type contact Crimp 14 4 1 2 3 3 2 Crimp contacts 2) 0W 0.9 l l l l 20 32 20 1.00 1.05 10.0 2 3) 1W 1.3 l l l l 20 26 18 1.50 1.35 15.0 3) 2W 2.0 l l l l 16 18 12 2.10 1.75 25.0 302 3W 3.0 l l l 12 14 10 2.10 1.55 35.0 5W 6.0 l 8 3.60 2.95 50.0 2) 0W 0.9 l l l l 20 32 20 1.20 0.90 8.0 3 1W 1.3 l l l l 20 26 18 1.30 1.55 12.0 303 3) 2W 1.6 l l l l 18 22 14 2.40 1.85 17.0 3W 2.0 l l l l 16 18 12 1.90 1.50 25.0 2) 0W 0.7 l l l l 22 32 22 0.85 0.70 7.0 4 2) 1W 0.9 l l l l 22 32 20 1.35 1.45 10.0 3) 2W 1.3 l l l l 20 26 18 1.85 1.85 15.0 304 3W 2.0 l l l l 16 18 12 1.45 1.25 19.0 4W 3.0 l l l 12 14 10 2.10 1.50 30.0 5W 4.0 l l l 10 12 10 2.95 2.65 35.0 2) 0W 0.7 l l l l 22 32 22 1.00 0.70 6.5 5 2) 1W 0.9 l l l l 22 32 20 1.25 1.15 9.0 305 3) 2W 1.3 l l l l 20 26 18 1.75 1.60 14.0 3W 1.6 l l l l 18 22 14 1.90 1.25 19.0 6 4) 0W 0.5 l l l l 28 32 28 0.85 0.65 2.5 306 2) 1W 0.7 l l l l 22 32 22 1.05 1.20 7.0 1) l First choice alternative Note: see calculation method, caution and suggested standard. 2) Special order alternative rated current = 6A for socket with elbow (90°) contact for printed circuit. 3) rated current = 12A for socket with elbow (90°) contact for printed circuit. 4) available only for connectors fitted with male contacts. 8 www.lemo.com Reference Series Contact ø (mm) Solder Crimp Print (straight) Print (elbow) Solder (max.) min. max. 1) Test voltage (kV rms) Contact-contact 1) Test voltage (kV rms) Contact-shell 1) Rated current (A) ® ® Multipole Solder contacts Contact Solder AWG type contact Crimp 14 4 1 2 3 3 2 Crimp contacts 6 2W 1.3 l l l l 20 26 18 1.35 1.45 12.0 306 3W 1.6 l l l l 18 22 14 1.60 1.15 17.0 4W 2.0 l l l 16 18 12 2.00 1.75 24.0 3) 0W 0.5 l l l l 28 32 28 0.80 0.70 2.5 7 2) 1W 0.7 l l l l 22 32 22 0.95 1.05 7.0 307 2W 1.3 l l l l 20 26 18 1.75 1.60 11.0 3W 1.6 l l l l 18 22 14 1.70 1.25 15.0 4W 2.0 l l l 16 18 12 2.00 1.80 20.0 8 1W 308 0.7 l l l l 22 32 22 0.95 1.15 5.0 8 2) 2W 0.9 l l l l 22 32 20 1.50 1.25 10.0 308 3W 1.3 l l l l 20 26 18 1.65 1.15 13.0 9 8x1.3 20 26 28 6.0 3W 309 l l l 1.35 1.05 1x2.0 16 18 12 15.0 9 3) 0W 309 0.5 l l l l 28 32 28 0.60 0.50 2.0 1) Note: see calculation method, caution and suggested standard. l First choice alternative 2) rated current = 6A for socket with elbow (90°) contact for printed circuit. Special order alternative 3) available only for connectors fitted with male contacts. www.lemo.com 9 Reference Series Contact ø (mm) Solder Crimp Print (straight) Print (elbow) Solder (max.) min. max. 1) Test voltage (kV rms) Contact-contact 1) Test voltage (kV rms) Contact-shell 1) Rated current (A) ® ® Multipole Solder contacts Contact Solder AWG type contact Crimp 14 4 1 2 3 3 2 Crimp contacts 3) 1W 0.5 l l l l 28 32 28 0.90 1.50 2.5 10 2) 2W 0.9 l l l l 22 32 20 1.45 1.30 8.0 3W 310 1.3 l l l l 20 26 18 1.25 0.90 12.0 4W 1.6 l l l 18 22 14 1.85 1.30 17.0 5W 2.35 2.30 20.0 3.0 l l l 12 14 10 2) 12 2W 0.7 l l l l 22 32 22 1.25 1.35 7.0 3W 312 0.9 l l l l 22 32 20 1.45 1.00 9.0 4W 1.3 l l l 20 26 18 1.45 1.60 12.0 3) 1W 0.5 l l l l 28 32 28 0.80 1.20 2.0 14 2) 2W 0.7 l l l l 22 32 22 1.15 1.35 6.5 314 2) 3W 1.20 1.20 9.0 0.9 l l l l 22 32 20 5W 2.0 l l l 16 18 12 2.10 2.00 18.0 16 3) 1W 0.5 l l l l 28 32 28 0.80 1.25 1.5 316 2W 0.7 l l l l 22 32 22 0.95 1.25 6.0 16 3W 0.9 l l l l 22 32 20 1.20 0.85 8.0 316 4W 0.9 l l l 22 32 20 1.35 1.50 10.0 5W 1.85 1.95 12.0 2.0 l l l 16 18 12 18 2W 0.7 l l l l 22 32 22 0.85 1.20 5.5 318 3W 0.9 l l l l 22 32 20 1.20 1.05 7.0 1) Note: see calculation method, caution and suggested standard. l First choice alternative 2) rated current = 6A for socket with elbow (90°) contact for printed circuit. Special order alternative 3) available only for connectors fitted with male contacts. 10 www.lemo.com Reference Series Contact ø (mm) Solder Crimp Print (straight) Print (elbow) Solder (max.) min. max. 1) Test voltage (kV rms) Contact-contact 1) Test voltage (kV rms) Contact-shell 1) Rated current (A) ® ® Multipole Solder contacts Contact Solder AWG type contact Crimp 14 4 1 2 3 3 2 Crimp contacts 19 319 2W 0.7 l l l l 22 32 22 0.95 1.25 5.0 20 3W 0.7 l l l l 22 32 22 1.00 0.90 6.0 320 20 4W 0.9 l l l 22 32 20 1.35 1.00 8.0 320 5W 1.6 l l l 18 22 14 1.90 1.70 10.0 22 3W 0.7 l l l l 22 32 22 1.00 0.90 5.5 322 24 3W 0.7 l l l l 22 32 22 0.95 0.80 4.0 324 4W 0.9 l l l 22 32 20 1.20 1.45 7.0 26 2W 0.5 l l l 28 0.95 1.30 2.0 326 3W 0.7 l l l l 22 32 22 0.95 0.70 4.0 1) Note: see calculation method, caution and suggested standard. l First choice alternative Special order alternative www.lemo.com 11 Reference Series Contact ø (mm) Solder Crimp Print (straight) Print (elbow) Solder (max.) min. max. 1) Test voltage (kV rms) Contact-contact 1) Test voltage (kV rms) Contact-shell 1) Rated current (A) ® ® Multipole Solder contacts Contact Solder AWG type contact Crimp 14 4 1 2 3 3 2 Crimp contacts 30 3W 0.7 l l l l 22 32 22 0.80 0.70 3.5 330 4W 0.9 l l l 22 32 20 0.95 0.85 5.0 5W 1.3 l l l 20 26 18 1.45 1.60 8.0 32 2W 0.5 l l l 28 332 0.80 1.20 1.5 32 3W 0.7 l l l l 22 32 22 332 0.75 0.70 3.0 40 4W 0.7 l l l 22 32 22 0.90 0.90 2.0 340 5W 1.3 l l l 20 26 18 1.30 1.45 7.0 48 348 4W 0.7 l l l 22 32 22 0.70 0.70 1.5 48 5W 1.3 l l l 20 26 18 348 1.20 1.10 6.0 50 350 5W 0.9 l l l 22 32 20 1.30 1.60 6.0 1) Note: see calculation method, caution and suggested standard. l First choice alternative Special order alternative 12 www.lemo.com Reference Series Contact ø (mm) Solder Crimp Print (straight) Print (elbow) Solder (max.) min. max. 1) Test voltage (kV rms) Contact-contact 1) Test voltage (kV rms) Contact-shell 1) Rated current (A) ® ® Multipole Solder contacts Contact Solder AWG type contact Crimp 14 4 1 2 3 3 2 Crimp contacts 54 354 5W 0.9 l l l 22 32 20 1.15 1.55 5.0 64 5W 1.30 1.55 3.0 364 0.9 l l l 22 32 20 1) l First choice alternative Note: see calculation method, caution and suggested standard. Special order alternative www.lemo.com 13 Reference Series Contact ø (mm) Solder Crimp Print (straight) Print (elbow) Solder (max.) min. max. 1) Test voltage (kV rms) Contact-contact 1) Test voltage (kV rms) Contact-shell 1) Rated current (A) ® ® Collets C and K type collets 0W, 1W, 2W and 3W series 0V, 1V, 2V and 3V series Reference Collet ø Cable ø Reference Collet ø Cable ø Type Code ø A ø B max. min. Type Code ø A ø B max. min. C 30 3.1 – 3.0 2.6 C 30 3.2 – 3.0 2.6 0W 3W C 35 4.2 4.2 3.5 3.1 C 35 4.2 – 3.5 3.1 C 40 C 40 4.2 – 4.0 3.6 4.2 4.2 4.0 3.6 C 45 5.2 5.2 4.5 4.1 C 45 5.2 – 4.5 4.1 C 50 5.2 5.2 5.0 4.6 C 50 5.2 – 5.0 4.6 C 55 6.2 – 5.5 5.1 C 30 3.2 – 3.0 2.6 1W C 60 6.2 – 6.0 5.6 C 35 4.2 – 3.5 3.1 C 65 7.2 – 6.5 6.1 C 40 4.2 – 4.0 3.6 C 70 7.2 – 7.0 6.6 C 45 5.2 – 4.5 4.1 C 75 8.2 – 7.5 7.1 C 50 5.2 – 5.0 4.6 C 80 8.2 – 8.0 7.6 C 55 6.2 6.2 5.5 5.1 C 85 9.2 – 8.5 8.1 C 60 6.2 6.2 6.0 5.6 C 90 9.2 – 9.0 8.6 C 65 7.2 6.7 6.5 6.1 C 95 10.2 10.2 9.5 9.1 K 70 7.2 – 7.0 6.6 C 10 10.2 10.2 10.0 9.6 K 75 8.2 8.2 7.5 7.1 C 11 11.2 10.6 10.5 10.1 K 80 8.2 8.2 8.0 7.6 K 11 12.3 – 12.0 10.6 K 85 9.2 8.6 8.5 8.1 K 12 13.8 13.8 12.8 12.1 C 30 3.2 – 3.0 2.6 2W K 13 13.8 13.8 13.5 12.9 C 35 4.2 – 3.5 3.1 K 14 15.3 15.3 14.0 13.6 C 40 4.2 – 4.0 3.6 K 15 15.3 15.3 15.0 14.1 C 45 5.2 – 4.5 4.1 C 50 5.2 – 5.0 4.6 C 55 6.2 – 5.5 5.1 C 60 6.2 – 6.0 5.6 C 65 7.2 – 6.5 6.1 C 70 7.2 – 7.0 6.6 C 75 8.2 8.2 7.5 7.1 C 80 8.2 8.2 8.0 7.6 C 85 9.2 8.6 8.5 8.1 K 90 9.2 – 9.0 8.6 K 95 10.2 10.2 9.5 9.1 K 10 10.2 10.2 10.0 9.6 K 11 11.2 10.6 10.5 10.1 All dimensions are in millimetres. 14 www.lemo.com ø B ø A ® ® C and K type collets 4W and 5W series Reference Collet ø Cable ø Reference Collet ø Cable ø Type Code ø A ø B max. min. Type Code ø A ø B max. min. C 10 C 50 6.3 – 5.0 4.8 11.8 – 10.5 9.6 4W 5W C 55 6.3 – 5.5 5.1 C 11 11.8 – 11.5 10.6 C 60 6.3 – 6.0 5.6 C 12 13.8 – 12.5 11.6 C 65 C 13 7.3 – 6.5 6.1 13.8 – 13.5 12.6 C 70 7.3 – 7.0 6.6 C 14 15.8 – 14.5 13.6 C 15 C 75 8.3 – 7.5 7.1 15.8 – 15.5 14.6 C 80 8.3 – 8.0 7.6 C 16 17.8 – 16.5 15.6 C 85 9.3 – 8.5 8.1 C 17 17.8 – 17.5 16.6 C 90 C 18 9.3 – 9.0 8.6 19.8 – 18.5 17.6 C 95 10.8 – 9.5 9.1 C 19 19.8 – 19.5 18.6 C 20 C 10 10.8 – 10.5 9.6 21.8 – 20.5 19.6 C 11 12.3 – 12.0 10.6 C 21 21.8 – 21.5 20.6 C 12 13.8 13.8 12.8 12.1 C 22 23.8 23.8 22.5 21.6 C 13 C 23 13.8 13.8 13.5 12.9 23.8 23.8 23.5 22.6 C 14 15.3 15.3 14.0 13.6 C 15 15.3 15.3 15.0 14.1 K 16 17.8 – 16.5 15.6 K 17 17.8 – 17.5 16.6 K 18 19.8 – 18.5 17.6 K 19 19.8 – 19.5 18.6 K 20 21.8 – 20.5 19.6 K 21 21.8 – 21.5 20.6 K 22 23.8 23.8 22.5 21.6 K 23 23.8 23.8 23.5 22.6 www.lemo.com 15 ø B ø A ® ® Variant Bend relief for W series models with collet Need to be ordered Need to be ordered Collet Collet Need to be ordered Need to be ordered separately separately Type Code Type Code C 30 to 10 GMA.3B.lll.ll Z C 30 to 50 GMA.0B.lll.ll Z 0W 3W K 11 to 15 GMA.4B.lll.ll C 30 to 65 GMA.1B.lll.ll Z Z C 50 to 15 GMA.4B.lll.ll 1W 4W K 70 to 85 GMA.2B.lll.ll C 30 to 85 GMA.2B.lll.ll Z 2W K 90 to 10 GMA.3B.lll.ll Note: The bend relief must be ordered separately (see pages 141 and 142 of the unipole/multipole catalog). All dimensions are in millimetres. Accessories BFG Plug caps with key (G) (IP68 and resistance to hydrostatic pressure 30 bars) Dimensions (mm) Part number Series B L A B e L N S1 BFG.0W.100.lAZ 0W 17.2 6 M14x1.0 12.5 85 16 BFG.1W.100.lAZ 1W 19.3 6 M16x1.0 15.5 85 18 BFG.2W.100.lAZ 2W 23.5 6 M20x1.0 17.5 85 22 BFG.3W.100.lAZ 3W 27.8 6 M24x1.0 22.0 120 26 S 1 BFG.4W.100.lAZ 4W 34.3 10 M30x1.0 22.5 120 32 N BFG.5W.100.lAZ 5W 50.0 10 M45x1.5 27.0 120 47 sliding loop l Body material: l = N, nickel-plated brass (Ni 3µm) l = S, stainless steel l Lanyard material: Stainless steel l Crimp ferrule material: Nickel-plated brass 16 www.lemo.com Ref. e ø A Ref. ® ® BRE Blanking caps for fixed sockets (This cap is only IP68 when installed) Dimensions (mm) Part number Series A L N S1 S 1 L BRE.0V.200.lAV 0W 17.2 13.7 85 16 BRE.1V.200.lAV 1W 19.3 13.7 85 18 BRE.2V.200.lAV 2W 23.5 14.7 85 22 BRE.3V.200.lAV 3W 27.8 14.7 120 26 BRE.4V.200.lAV 4W 34.3 14.7 120 32 BRE.5V.200.lAV 5W 50.0 16.2 120 47 N l Body material: l = N, nickel-plated brass (Ni 3µm) l = S, stainless steel l Lanyard material: Stainless steel l Crimp ferrule material: Nickel-plated brass ® l O-ring: FPM (Viton ) BRF Blanking caps for free sockets (This cap is only IP68 when installed) Dimensions (mm) Part number Series A L N S1 S 1 L BRF.0V.200.lAV 0W 17.2 13.7 85 16 BRF.1V.200.lAV 1W 19.3 13.7 85 18 BRF.2V.200.lAV 2W 23.5 14.7 85 22 BRF.3V.200.lAV 3W 27.8 14.7 120 26 BRF.4V.200.lAV 4W 34.3 14.7 120 32 BRF.5V.200.lAV 5W 50.0 16.2 120 47 N sliding loop l Body material: l = N, nickel-plated brass (Ni 3µm) l = S, stainless steel l Lanyard material: Stainless steel l Crimp ferrule material: Nickel-plated brass ® l O-ring: FPM (Viton ) GEA Hexagonal nuts Dimensions (mm) Part number Series A B e L A GEA.1S.240.LN 0W 14 15.8 M12 x 1.00 2.5 L e GEA.0E.240.LN 1W 17 19.2 M14 x 1.00 2.5 GEA.1E.240.LN 2W 19 21.5 M16 x 1.00 3.0 GEA.2E.240.LN 3W 24 27.0 M20 x 1.00 4.0 GEA.3E.240.LN 4W 30 34.0 M24 x 1.00 5.0 GEA.5W.240.LN 5W 46 53.0 M38 x 1.50 8.0 l Material: Note: to order this part separately, use the above part numbers. The last – Nickel-plated brass (3 µm) letters «LN» of the part number refer to the nut material and treatment. – Stainless steel If a nut in stainless steel is desired, replace the last letters of the part number by «AZ». www.lemo.com 17 ø 3.5 ø A ø A øB ® ® GDA O-ring for plug Dim. (mm) Part number Series A C GDA.99.070.100VK 0W 7.0 1.00 ø A GDA.99.090.125VK 1W 9.0 1.25 GDA.99.120.150VK 2W 12.0 1.50 GDA.99.150.150VK 3W 15.0 1.50 GDA.99.190.200VK 4W 19.0 2.00 ø C GDA.99.310.250VK 5W 31.0 2.50 ® l Material: FPM (Viton ) Panel cut-outs Panel Cut-outs EVG, HRG, HVG Dimensions (mm) Series A B L L 0W 12.1 10.6 19.0 1W 14.1 12.6 21.0 2W 16.1 14.6 25.5 3W 20.2 18.6 30.0 0.1 0.1 + + 4W 24.2 22.6 37.0 ø B ø A 0 0 5W 38.2 35.6 53.0 Mounting nuts torque Torque (Nm) Component 0W 1W 2W 3W 4W 5W 0.7 0.8 2 3 5 8 Collet nut for Fll and Pll Mounting hex nut for sockets 5 7 9 12 17 22 Coupling nut 0.7 0.8 2 3 5 8 1N = 0.102 kg 18 www.lemo.com ® ® Cable assembly Assembly instructions In order to ensure the sealing of plugs and sockets on the cable side, it is imperatively necessary to complete their assembly by realizing it with an adapted technique. We recommend the fitting of an heatshrink boot with inner melting coating of type ATUM (manufactured by the RAYCHEM company) or similar. This heatshrink boot is not provided with the connector. Please consult us. www.lemo.com 19 ® ® 20 www.lemo.com LEMO complete product range 3K. B S K E F 00 01 0A 3T 4A 4M 1D Y 05 5G 2G 2C L H R N 03 V W U T7 P D K/S 01 DIN 93C Unipole • Multipole Coaxial 50 Ω Coaxial 75 Ω Multi Coaxial Mixed Coax + LV Triaxial 50 Ω Triaxial 75 Ω Mixed Triax + LV Quadrax High Voltage Multi High Voltage Mixed HV + LV Fibre Optic Multi Fibre Optic Mixed FO + LV Thermocouple Fluidic Multi Fluidic Mixed Fluidic + LV Most frequently used in darker colour • included in this catalogue B Series Keyed S Series K Series Keyed E Series F Series Keyed 00 Series 01 Series 0A Series 3T Series 4A Series 4M Series Keyed 3K.93C Series Keyed 1D Series Y Series 05 Series 5G Series Keyed 2G Series Keyed 2C Series L Series Keyed H Series M Series Keyed R Series Keyed N Series Keyed 03 Series Keyed V Series W Series Keyed Cable assembly K/S Series Keyed REDEL T7 Series REDEL P Series Keyed REDEL D Series 01 Series Keyed VAA Series SAA Series TAA Series No reproduction or use without express permission of editorial or pictorial content, in any manner. LEMO SA reserves the right to modify and improve specifications, at all times, without any notification. LEMO HEADQUARTERS SWITZERLAND LEMO SA Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com LEMO SUBSIDIARIES AUSTRIA JAPAN LEMO Elektronik GesmbH LEMO Japan Ltd Lemböckgasse 49/E6-3 2-7-22, Mita, 1230 Wien Minato-ku, Tokyo, 108-0073 Tel: (+43 1) 914 23 20 0 Tel: (+81 3) 54 46 55 10 Fax:(+43 1) 914 23 20 11 Fax: (+81 3) 54 46 55 11 sales@lemo.at lemoinfo@lemo.co.jp MIDDLE EAST BRAZIL LEMO Middle East Gen. Trad. LLC LEMO Latin America Ltda Concorde Tower 6th Floor, Av. José Rocha Bonfim, Dubai Media City, P.O. Box 126732 214 Salas 224 / 225 Dubai, United Arab Emirates Condomínio Praça Capital Tel: +971 55 222 36 77 Ed. Chicago info-me@lemo.com Campinas / SP - Brasil 13080-650 Tel: +55 (11) 98689 4736 NETHERLANDS / BELGIUM info-la@lemo.com LEMO Connectors Benelux De Trompet 1060 CANADA 1967 DA Heemskerk LEMO Canada Inc Tel. (+31) 251 25 78 20 44 East Beaver Creek Road, unit 20 Fax (+31) 251 25 78 21 Richmond Hill, Ontario L4B 1G8 info@lemo.nl Tel: (+1 905) 889 56 78 Fax: (+1 905) 889 49 70 NORWAY / ICELAND info-canada@lemo.com LEMO Norway A/S CHINA / HONG KONG Soerumsandvegen 69, 1920 Soerumsand LEMO Electronics (Shanghai) Co., Ltd Tel: (+47) 22 91 70 40 First Floor, Block E, Fax: (+47) 22 91 70 41 18 Jindian Road, Pudong info-no@lemo.com Shanghai, China, 201206 Tel: (+86 21) 5899 7721 SINGAPORE Fax: (+86 21) 5899 7727 LEMO Asia Pte Ltd cn.sales@lemo.com 4 Leng Kee Road, #06-09 SiS Building DENMARK LEMO Denmark A/S Singapore 159088 Tel: (+65) 6476 0672 Nybrovej # 97 Fax: (+65) 6474 0672 2820 Gentofte sg.sales@lemo.com Tel: (+45) 45 20 44 00 Fax: (+45) 45 20 44 01 SPAIN / PORTUGAL info-dk@lemo.com IBERLEMO SAU Brasil, 45, 08402 Granollers FRANCE Barcelona LEMO France Sàrl Tel: (+34 93) 860 44 20 24/28 Avenue Graham Bell Bâtiment Balthus 4 Fax: (+34 93) 879 10 77 Bussy Saint Georges info-es@lemo.com 77607 Marne la Vallée Cedex 3 SWEDEN / FINLAND Tel: (+33 1) 60 94 60 94 LEMO Nordic AB Fax: (+33 1) 60 94 60 90 Gunnebogatan 30, Box 8201 info-fr@lemo.com 163 08 Spånga Tel: (+46 8) 635 60 60 GERMANY Fax: (+46 8) 635 60 61 LEMO Elektronik GmbH info-se@lemo.com Hanns-Schwindt-Str. 6 81829 München SWITZERLAND Tel: (+49 89) 42 77 03 LEMO Verkauf AG Fax: (+49 89) 420 21 92 Grundstrasse 22 B, 6343 Rotkreuz info@lemo.de Tel: (+41 41) 790 49 40 ch.sales@lemo.com HUNGARY REDEL Elektronika Kft UNITED KINGDOM Nagysándor József u. 6-12 LEMO UK Ltd 1201 Budapest 12-20 North Street, Worthing, Tel: (+36 1) 421 47 10 West Sussex, BN11 1DU Fax: (+36 1) 421 47 57 Tel: (+44 1903) 23 45 43 info-hu@lemo.com lemouk@lemo.com ITALY USA LEMO Italia srl LEMO USA Inc Viale Lunigiana 25 P.O. Box 2408 20125 Milano Rohnert Park, CA 94927-2408 Tel: (+39 02) 66 71 10 46 Tel: (+1 707) 578 88 11 Fax: (+39 02) 66 71 10 66 (+1 800) 444 53 66 sales.it@lemo.com Fax:(+1 707) 578 08 69 info-US@lemo.com LEMO DISTRIBUTORS ARGENTINA, AUSTRALIA, BRAZIL, CHILE, COLOMBIA, CZECH REPUBLIC, GREECE, INDIA, ISRAEL, NEW ZEALAND, PERU, POLAND, RUSSIA, SOUTH AFRICA, SOUTH KOREA, TAIWAN, TURKEY, UKRAINE www.lemo.com © CAT.MW.LEN.P1006 - updated November 2016