Reed Sensors Firecracker > 59065 59065 5/16” Plastic Threaded Barrel Sensor + 57065 Actuator Description The 59065 is a small plastic barrel sensor with a 5/16” x 24 thread, 38.1mm (1.500”) long with a choice of normally open, normally open high voltage, normally closed or change over contacts. It is capable of switching up to 265Vac/300Vdc at 10VA. It functions best with the 57065 actuator. Note: The 57065 Actuator is sold separately. Features • Two-part magnetically operated • Customer defined sensitivity option proximity sensor • Choice of cable length and • Threaded barrel with retaining nuts connector • Available as M8 (57070/59070) or Agency Approvals 5/16 (57065/59065) size options Agency Agency File Number Benefits E61760 • Simple installation and adjustment • Excellent for switching micro- using supplied retaining nuts controller logic level loads Note: Contact Littelfuse for specific agency approval ratings. • Operates through non-ferrous • No standby power requirement materials such as wood, plastic or aluminium Dimensions Dimensions in mm (inch) Applications M8 x 1.25 (57070) 5/16 x 24THD (57065) Actuator • Position and Limit Sensing • Industrial Process Control • Security System Switch • Linear Actuators 31.75 (1.250) 5.56 38.10 (.219) (1.500) M8 x 1.25 (59070) 5/16 x 24 THD (59065) Sensor 6.35 NOM. (.250) 31.75 (1.250) 300±10.00 38.10 5.56 (11.81±.394) (1.500) (.219) Different cable options available. © 2017 Littelfuse Revised: 02/12/17 littelfuse.com Specifications are subject to change without notice. Reed Sensors Firecracker > 59065 59065 5/16” Plastic Threaded Barrel Sensor + 57065 Actuator Electrical Ratings Normally Open Contact Type Normally Open Change Over Normally Closed HighVoltage Switch Type 1 2 3 4 1 Contact Rating VA/Watt - max. 10 10 5 5 2 Switching Vdc - max. 200 300 175 175 4 Voltage Vac - max. 140 265 120 120 3 Breakdown Vdc - min. 250 400 200 200 2 Switching Adc - max. 0.5 0.4 0.25 0.25 4 Current Aac - max. 0.35 0.30 0.18 0.18 Carry Adc - max. 1.2 1.4 1.5 1.5 Contact, Initial Ω - max. 0.2 0.2 0.2 0.2 5 Resistance 10 10 9 9 Insulation Ω - min. 10 10 10 10 Capacitance Contact pF - typ. 0.3 0.2 0.3 0.3 Temperature Operating °C -40 to +105 -20 to +105 -40 to +105 -40 to +105 Product Characteristics 6 Operate Time ms - max. 1.0 1.0 3.0 3.0 6 Release Time ms - max. 1.0 1.0 3.0 3.0 7 Shock 11ms 1⁄2 sine G - max. 100 100 50 50 7 Vibration 50-2000 Hz G - max. 30 30 30 30 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Breakdown Voltage - per MIL-STD-202, Method 301. 4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens. 6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II). 7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. 8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse. Sensitivity Options (Using 57065 Actuator) Select Option S T U V Activate Distance–D Activate Distance–D Activate Distance–D Activate Distance–D Pull-In Pull-In Pull-In Pull-In Switch Type mm (inch) mm (inch) mm (inch) mm (inch) AT Range AT Range AT Range AT Range Average Average Average Average 1 Normally Open 12-18 8.4 (.330) 17-23 6.6 (.260) 22-28 5.1 (.200) 27-33 4.0 (.157) 2 High Voltage -- -- 17-23 6.6 (.260) 22-28 5.1 (.200) 27-33 4.0 (.157) 3 Change Over 15-20 6.5 (.255) 20-25 4.9 (.193) 25-30 3.7 (.146) -- -- 4 Normally Closed 15-20 6.5 (.255) 20-25 4.9 (.193) 25-30 3.7 (.146) -- -- Note: 1. Pull-In AT Range: These AT values are the bare reed switch AT before modification. Schematics Switch Type 2. The activation distance is average value on the final sensor assembly. Black 1 and 2 Black Sensor Actuator Black Blue 3 White Black 4 Black D © 2017 Littelfuse Revised: 02/12/17 littelfuse.com Specifications are subject to change without notice. Reed Sensors Firecracker > 59065 59065 5/16” Plastic Threaded Barrel Sensor + 57065 Actuator Cable Length Specification Part Numbering System Cable Type: 24 AWG 7/32 PVC 105°C UL1430/UL1569 Sensor: 59065 - X - X - XX - X Cable Length Select Option mm (inch) 02 300 (11.81) Series Switch T ype 1, 2, 3, or 4 Termination Specification Sensitivity Termination Options S, T, U, or V Select Description Cable Length Option (Two-wire versions illustrated) 02 A Tinned leads (6.4±0.76)mm Termination A, F, or E F Untinned leads (6.4±0.76)mm Actuator: 57065 - 000 E JST type XHP 2.5mm pitch Series Standard Actuator 000 Note: The 57065 Actuator is sold separately. Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width Bulk Bulk 500 N/A N/A © 2017 Littelfuse Revised: 02/12/17 littelfuse.com Specifications are subject to change without notice.