PRODUCT: PESD0603-240 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27256 REV LETTER: I REV DATE: OCTOBER 29, 2015 PAGE NO.: 1 of 9 Specification Status: Released BENEFITS  ESD protection for high frequency applications (HDMI 1.3)  Smaller form factor for board space savings  Helps protect electronic circuits against damage from electrostatic discharge (ESD) events  Assists equipment to pass IEC 61000-4-2, level 4 testing FEATURES  0.25 pF (typ) Capacitance  Low leakage current  Low clamping voltage  Fast response time (<1ns)  Capable of withstanding numerous ESD strikes  Compatible with standard reflow installation procedures  Thick film technology  Bi-directional protection APPLICATIONS  HDMI 1.3 interface  LCD, HDTV  Cellular phones  Antennas (cell phones, GPS…)  Portable video devices (PDA, DSC, Bluetooth…)  Printer ports  High speed Ethernet  USB 2.0 and IEEE 1394 interfaces  DVI interface CAUTION: This device should not be used in Power Bus applications MATERIALS INFORMATION RoHS Compliant ELV Compliant Halogen Free* Lead-Free HF © 2016 Littelfuse,Inc l it t e l f u s e . c o m Specifications are subject to change without notice. Revised July 26,2016 PRODUCT: PESD0603-240 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27256 REV LETTER: I REV DATE: OCTOBER 29, 2015 PAGE NO.: 2 of 9 PART NUMBERING PESD 0603 - 240 Series Operating Voltage Designator 0 24 x 10 = 24V DC EIA Size * Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm TYPICAL DEVICE RATINGS AND CHARACTERISTICS Typical TLP Typical Typical Max Max Typical TLP 2 Clamping Capacitance Leakage Leakage Operating Trigger 1 Voltage @ 1 MHz, Current Current 1 Voltage Voltage after 30ns 1Vrms @24VDC @24VDC Symbol V V V Cp I I DC T(TLP) C(TLP 30) L(Typ) L(MAX) Unit V V V pF μA μA Value 24 215 45 0.25 <0.01 10.0 Note 1: TLP test method at 1000V (refer to FIG. 5 on page 5) Note 2: Typical capacitance @ 0V and 24V GENERAL CHARACTERISTICS Operating temperature: -55°C to +125°C Storage temperature: -55°C to +125°C ESD voltage capability (tested per IEC 61000-4-2) o Contact discharge mode: 8kV (typ), 15kV (max) o Air discharge mode: 15kV (typ), 25kV (max) [1 pulse: per customer request] ESD pulse withstand: Typically 500 pulses (tested per IEC 61000-4-2, level 4, and contact method) Environmental Specifications Bias Bias Heat Bias Low Solder Mechanical Solvent Humidity Thermal Shock Solderability Vibration Test Temp Test Heat Shock Resistance Test o @ 85 C 10 to 50Hz, 60s 1500G, o o o o o o -55 C to 125 C @ 125 C @ -55 C 250 C +/- 5 C IPA Test @ 85% RH cycle, 2hrs 0.5ms, X-Y-Z o 30min dwell VDC (max) VDC (max) 3s +/- 1s 260 C, 10s ultrasonic Conditions V (max) each in X-Y-Z axis 3 DC 1000 cycles 1000 hours 1000 hours 300s 1000 hours axis times No Physical No Physical No Physical Pass/Fail 90% IL≤10µA IL≤10µA IL≤10µA IL≤10µA 95% coverage Damage IL Damage Damage Criteria coverage ≤ 10 μA IL ≤ 10 μA IL ≤ 10 μA © 2016 Littelfuse,Inc l it t e l f u s e . c o m Specifications are subject to change without notice. Revised July 26,2016 PRODUCT: PESD0603-240 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27256 REV LETTER: I REV DATE: OCTOBER 29, 2015 PAGE NO.: 3 of 9 FIG 1: CAPACITANCE VS. FREQUENCY (TYPICAL SAMPLE) (PESD0603 Flat Response of Capacitance over Frequency Range) FIG 2: EYE DIAGRAM (TYPICAL SAMPLE) (PESD0603 Eye Diagram Performance at 3.4 GHz— meets criteria for HDMI 1.3) © 2016 Littelfuse,Inc l it t e l f u s e . c o m Specifications are subject to change without notice. Revised July 26,2016 PRODUCT: PESD0603-240 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27256 REV LETTER: I REV DATE: OCTOBER 29, 2015 PAGE NO.: 4 of 9 FIG 3: INSERTION LOSS DIAGRAM (TYPICAL SAMPLE) (PESD0603 Minimal Insertion Loss at 3.4 GHz) -0.25dB at 3.4GHz FIG 4: ESD PROTECTION FOR HDMI (PESD0603 Reference Layout and Test Results available) © 2016 Littelfuse,Inc l it t e l f u s e . c o m Specifications are subject to change without notice. Revised July 26,2016 PRODUCT: PESD0603-240 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27256 REV LETTER: I REV DATE: OCTOBER 29, 2015 PAGE NO.: 5 of 9 FIG 5:TYPICAL TRANSMISSION LINE PULSE RESPONSE GRAPH Typical TLP Clamping Voltage 300 250 200 150 100 50 0 0 10 20 30 40 50 60 70 80 90 100 Time (ns) © 2016 Littelfuse,Inc l it t e l f u s e . c o m Specifications are subject to change without notice. Revised July 26,2016 Voltage ( V ) PRODUCT: PESD0603-240 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27256 REV LETTER: I REV DATE: OCTOBER 29, 2015 PAGE NO.: 6 of 9 DIMENSIONS D A B C Drawing Not To Scale Length A Height B Terminal Width C Width D Min Max Min Max Min Max Min Max mm 1.50 1.70 0.45 0.55 0.10 0.50 0.70 0.95 in* (0.059) (0.067) (0.018) (0.022) (0.004) (0.020) (0.028) (0.037) * Round off approximation RECOMMENDED LAND PATTERN: Solder thickness 0.15 to 0.2mm X W Y Z © 2016 Littelfuse,Inc l it t e l f u s e . c o m Specifications are subject to change without notice. Revised July 26,2016 PRODUCT: PESD0603-240 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27256 REV LETTER: I REV DATE: OCTOBER 29, 2015 PAGE NO.: 7 of 9 W X Y Z Min Max Min Max Min Max Min Max mm 0.90 1.00 0.50 0.60 1.00 1.10 2.70 2.80 in* (0.035) (0.039) (0.020) (0.024) (0.039) (0.043) (0.106) (0.110) * Round off approximation . SOLDER REFLOW RECOMMENDATIONS: From ambient to Temperature A Preheating 30s to 60s ramp up 1 temperature B Preheating 140°C - 160°C 60s to 120s From Preheating to Temperature C Main heating 20s to 40s ramp up 2 temperature at 200°C 60s ~ 70s Main D at 220°C 50s ~ 60s heating at 240°C 30s ~ 40s at 260°C 5s ~ 10s From main heating E Cooling max 4°C/s temperature to 100°C © 2016 Littelfuse,Inc l it t e l f u s e . c o m Specifications are subject to change without notice. Revised July 26,2016 PRODUCT: PESD0603-240 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27256 REV LETTER: I REV DATE: OCTOBER 29, 2015 PAGE NO.: 8 of 9 PACKAGING Packaging Tape & Reel Standard Box PESD0603-240 5,000 25,000 EIA referenced Reel Dimensions for PESD Devices Reel Dimensions (mm): A B C D E F G 0603 178.0 ±2.0 2.0 ±0.5 13.0±0.5 21.0±0.8 62.0±1.5 9.0±0.5 13.0±1.0 Devices Carrier Dimensions (mm): 1 A B C D E F L W T 0603 8.0±0.3 3.5±0.05 1.75±0.1 2.0±0.05 4.0±0.1 1.5±0.1 2.02±0.20 1.27±0..15 0.60±0.03 Devices Note 1: Carrier thickness Product Orientation – always face up (meaning the substrate is at the bottom), but parts do not have polarity mark. © 2016 Littelfuse,Inc l it t e l f u s e . c o m Specifications are subject to change without notice. Revised July 26,2016 PRODUCT: PESD0603-240 ESD Protector Overvoltage Protection Device DOCUMENT: SCD27256 REV LETTER: I REV DATE: OCTOBER 29, 2015 PAGE NO.: 9 of 9 Leader & Trailer: The leader is 180mm in length & consists of empty cavities with sealed cover tape. The trailer is 350mm in length & consists of empty cavities with sealed cover tape. POST REFLOW, CLEANING CONDITIONS A 5% saponifier combined with water during wash. For the ultrasonic process water temperature should be at 50°C and board should be submerged for a minimum of one minute in the solutions, then rinse and dry. For in-line washing, the temperature of the water sprayed should be at 110°C, rinse and drying is done in-line. Warning: Application Limitations for PESD0603-240. This part is not intended to be used on power lines or for power bus applications. Users should independently evaluate the suitability of and test each product selected for their own applications Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, military, aerospace, medical, lifesaving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shallnot be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. © 2016 Littelfuse,Inc l it t e l f u s e . c o m Specifications are subject to change without notice. Revised July 26,2016