MEAN WELL AD-155B
Specifications
Manufacturer
MEAN WELL
Manufacturers Part #
AD-155B
Industry Aliases
AD-155B
Series
AD-155
Factory Pack Quantity
1
Application
Battery Charger
Convection Rating
155 W
Cooling Method
Convection
Dimensions
7.83 x 4.33 x 1.97"
Efficiency
84%
Environmental Conditions
General Purpose
Industry
Industrial
Input Type
AC
Mechanical Style
Open / Enclosed Frame
Number of Outputs
2
Operating Temperature
-10 to +60°C, derate linearly from 50-60°C to 80% power
Output Amps 1
5 A
Output Amps 2
0.5 A
Output Voltage V1 Nominal
27.6 V
Output Voltage V2 Nominal
27.1 V
Package Type
Enclosed
Power
155 W
Subcategory
AC-DC Power Supply
Datasheet
Extracted Text
MEAN WELL AD-155 SERIES 155W Single Output with Battery Charger(UPS Function) AD-155 series 155 Watt Battery Charger Power Supply Measures: 7.83 x 4.33 x 1.97”” ■ ‧ ‧ ‧ ‧ ‧ ‧ ‧ Bauartgepruft Sicherheit egelma ge od o s bewac g www.tuv.com ID 2000000000 SPECIFICATION MODEL AD-155A AD-155B AD-155C OUTPUT NUMBER CH1 CH2 CH1 CH2 CH1 CH2 DC VOLTAGE 13.8V 13.3V 27.6V 27.1V 54V 53.5V RATED CURRENT 10.5A 0.5A 5A 0.5A 2.7A 0.2A CURRENT RANGE 0 ~ 11.5A 0 ~ 0.5A 0 ~ 5.5A 0 ~ 0.5A 0 ~ 2.7A 0 ~ 0.5A RATED POWER 151.55W 151.55W 156.5W RIPPLE & NOISE (max.) Note.2 150mVp-p -------- 150mVp-p -------- 240mVp-p -------- OUTPUT VOLTAGE ADJ. RANGE CH1: 12 ~ 14.5V CH1: 24 ~ 29V CH1: 48 ~ 58V VOLTAGE TOLERANCE Note.3 ±2.0% -------- ±1.0% -------- ±1.0% -------- LINE REGULATION ±0.5% -------- ±0.5% -------- ±0.5% -------- LOAD REGULATION ±0.5% -------- ±0.5% -------- ±0.5% -------- SETUP, RISE TIME 1000ms, 90ms/230VAC 2000ms, 90ms/115VAC at full load HOLD UP TIME (Typ.) 24ms/230VAC 20ms/115VAC at full load VOLTAGE RANGE 88 ~ 264VAC 124 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.92 at full load EFFICIENCY (Typ.) 80% 84% 84% INPUT AC CURRENT (Typ.) 2.5A/115VAC 1.5A/230VAC INRUSH CURRENT (Typ.) COLD START 23A/115VAC 45A/230VAC LEAKAGE CURRENT <1mA / 240VAC CH1:105 ~ 135% CH2:0.51 ~ 0.9A rated output power OVERLOAD Protection type : AC Charging Mode : Constant current limiting, recovers automatically after fault condition is removed UPS Mode : Protected by internal fuse PROTECTION CH1:15.87 ~ 18.63V CH1:31.74 ~ 37.26V CH1:62.1 ~ 72.9V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 10V±0.8V 19.5V(+1.5V,-1V ) 39V±2V BATTERY LOW -10 ~ +60℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 183.3K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 199*110*50mm (L*W*H) 0.88Kg; 16pcs/15Kg/0.95CUFT PACKING ℃ NOTE Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensur File N e a pr amoduct will work pr e:AD-155-SPEC 2 operly and r 015-11-26eliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-AD-155-power-supply.html h t t p: / / pow e r. sa ge r. c om 3-M3 MEAN WELL AD-155 SERIES 155 Watt Battery Charger Power Supply 155W Single Output with Battery Charger(UPS Function) A D- 155 series Measures: 7.83 x 4.33 x 1.97”” Mechanical Specification Case No. 906B Unit:mm 192 5 172 100 1 2 3 4 5 6 5-M3 7 8 1 CN1 2 Terminal Pin No. Assignment 199 Pin No. Assignment Pin No. Assignment 6 190.5 1 AC/L 5 BAT. + 2 AC/N 6 BAT. -/COM 3 FG 7 DC OUTPUT COM 4 NC 8 DC OUTPUT +V CN1 Pin No. Assignment :JST B2B-XH or equivalent Pin No. Assignment Mating Housing Terminal 1 JST XHP JST SXH-001T-P0.6 RESET SW or equivalent or equivalent 2 20 159 PFC fosc : 67KHz PWM fosc : 134KHz Block Diagram BAT.CHARGER B+ BACK UP RESET EMI FILTER RECTIFIERS PFC POWER +V & I/P & SWITCHING CIRCUIT -V RECTIFIERS FILTER CONSTANT CURRENT LIMITING & FG DETECTION O.L.P. PWM & PFC CIRCUIT ACTIVE CONTROL START O.V.P. CIRCUIT Derating Curve Output Derating VS Input Voltage (A) 100 100 +13.8V 90 With 21.6 CFM min.(10cm) 80 80 70 60 With NO FAN 60 40 50 20 40 -10 0 10 20 30 40 50 60 70 88 90 100 120 140 160 180 200 220 240 264 (HORIZONTAL) AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:AD-155-SPEC 2015-11-26 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-AD-155-power-supply.html h t t p: / / pow e r. sa ge r. c om ψ3.5 110 50 LOAD (%) 8.2 12 16.5 9.5 24.5 37 LOAD (%) 12 25 3.5 3.5 97 6 20 6.5
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the AD-155B?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods