MEAN WELL CEN-100 SERIES 100 Watt LED Power Supply 100W Single Output LED Power Supply CEN-1 0 0 serie s Measures: 7.68 x 2.46 x 1.59” ■ Features : ‧Universal AC input / Full range (up to 295VAC) ‧Protections: Short circuit / Over current / Over voltage / Over temperature ‧Output voltage and constant current level adjustable ‧Built-in active PFC function ‧IP66 design for indoor or outdoor installations ‧Class 2 power unit ‧Cooling by free air convection ‧100% full load burn-in test ‧High reliability ‧Suitable for LED lighting and moving sign applications ‧Compliance to worldwide safety regulations for lighting ‧Suitable for dry / damp / wet locations ‧3 years warranty 110 .. F SELV IP66 ( for 48V,54V only) ( except for 48V,54V ) SPECIFICATION MODEL CEN-100-20 CEN-100-24 CEN-100-30 CEN-100-36 CEN-100-42 CEN-100-48 CEN-100-54 DC VOLTAGE 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.5 13 ~ 20V 15.6 ~ 24V 19.5 ~ 30V 23.4 ~ 36V 27.3 ~ 42V 31.2 ~ 48V 35.1 ~ 54V RATED CURRENT 4.8A 4A 3.2A 2.65A 2.28A 2A 1.77A CURRENT RANGE 0 ~ 4.8A 0 ~ 4A 0 ~ 3.2A 0 ~ 2.65A 0 ~ 2.28A 0 ~ 2A 0 ~ 1.77A RATED POWER 96W 96W 96W 95.4W 95.76W 96W 95.58W RIPPLE & NOISE (max.) Note.2 2.0Vp-p 2.7Vp-p 3Vp-p 3.6Vp-p 4Vp-p 4.6Vp-p 5Vp-p OUTPUT VOLTAGE ADJ. RANGE (SVR1) 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 37 ~ 46V 43 ~ 53V 49 ~ 58V CURRENT ADJ. RANGE(SVR2) 3.12 ~ 4.8A 2.6 ~ 4A 2.08 ~ 3.2A 1.72 ~ 2.65A 1.48 ~ 2.28A 1.3 ~ 2A 1.15 ~ 1.77A VOLTAGE TOLERANCE Note.3 ±10% LINE REGULATION ±3.0% LOAD REGULATION ±5.0% SETUP TIME 500ms / 230VAC 1200ms / 115VAC at full load VOLTAGE RANGE Note.4 90 ~ 295VAC 127 ~ 417VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) INPUT EFFICIENCY (Typ.) 88% 89% 90% 90% 90% 91% 91% AC CURRENT (Typ.) 1.4A/115VAC 0.7A/230VAC 0.5A/277VAC INRUSH CURRENT (Typ.) COLD START 45A(twidth=85μs measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT <0.75mA / 240VAC 95 ~ 110% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed 22.8 ~ 26V 28 ~ 32V 34 ~ 38V 41 ~ 46V 47 ~ 52V 54 ~ 60V 59 ~ 68V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover -30 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS UL8750, CSA C22.2 No. 250.0-08(except for 48V, 54V), TUV EN61347-1, EN61347-2-13, IP66, J61347-1, J61347-2-13 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & I/P-O/P, I/P-FG, O/P-FG: >100M Ohms / 500VDC / 25℃/ 70% RH ISOLATION RESISTANCE EMC Compliance to EN55015, EN61000-3-2 Class C (≧65% load) ; EN61000-3-3 EMC EMISSION EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547, light industry level (surge 4KV), criteria B MTBF 519.5Khrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 195*62.5*40.5mm (L*W*H) 0.6Kg;24pcs/15.4Kg/1.29CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. Please refer to "DRIVING METHODS OF LED MODULE". 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 7. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. 8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. File Name:CEN-100-SPEC 2014-03-13 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-CEN-100-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL CEN-100 SERIES 100 Watt LED Power Supply 100W Single Output LED Power Supply C E N - 100 series Measures: 7.68 x 2.46 x 1.59” Mechanical Specification Case No. 993A Unit:mm 195 10.5 174 7.6 300±20 300±20 Vo Io T case AC/L(Brown) 86 ADJ. ADJ. +V(Red) AC/N(Blue) -V(Black) FG (Green/Yellow) SJTW 18AWG×3C SVT 18AWG×2C 30.64 ψ4.6×4PL ※ T case: Max. Case Temperature. Block Diagram fosc : 42KHz(115VAC) 68KHz(230VAC) RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION CIRCUIT FG O.L.P. PWM & PFC CONTROL O.C.P. O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 -30 -25 -5 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 295 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:CEN-100-SPEC 2014-03-13 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-CEN-100-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) 30.6 45 62.5 31.25 LOAD (%) 40.5 MEAN WELL CEN-100 SERIES 100 Watt LED Power Supply 100W Single Output LED Power Supply C E N - 100 series Measures: 7.68 x 2.46 x 1.59” Power Factor Characteristic Constant Current Mode 1 .0 0 0 .9 8 0 .9 6 0 .9 4 0 .9 2 2 7 7 V ac 0 .9 0 0 .8 8 2 3 0 V ac 0 .8 6 1 1 5 V ac 0 .8 4 0 .8 2 0 .8 0 0 .7 8 5 0 % 6 0 % 7 0 % 8 0 % 9 0 % 1 0 0 % (100W) LOAD EFFICIENCY vs LOAD (48V Model) CEN-100 series possess superior working efficiency that up to 91% can be reached in field applications. 94 90 86 82 78 277Vac 74 230Vac 70 115Vac 66 62 58 54 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE This LED power supply is suggested to work in constant current mode area (CC) to drive the LEDs. In the constant current region, the highest voltage at the output of the driver 100 depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. Constant Current area 65 (min.) Hiccup Protection 50 100 Io (%) Typical LED power supply I-V curve File Name:CEN-100-SPEC 2014-03-13 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-CEN-100-power-supply.html h t t p: / / pow e r. sa ge r. c om PF EFFICIENCY (%) Vo(%)