MEAN WELL CLG-60 SERIES 60 Watt LED Power Supply 60W Single Output LED Power Supply Measures: 7.70 x 2.42 x 1.53”” CL G- 6 0 ser ies ■ Features : ‧Universal AC input / Full range (up to 295VAC) ‧Built-in active PFC function ‧High efficiency up to 89% ‧Protections: Short circuit / Over current / Over voltage / Over temperature ‧Cooling by free air convection ‧IP67 design for indoor or outdoor installations ‧Class 2 power unit ‧Pass LPS ‧100% full load burn-in test ‧High reliability ‧Suitable for LED lighting and moving sign applications (Note.2) ‧Compliance to worldwide safety regulations for lighting ‧Suitable for dry / damp / wet locations ‧3 years warranty 110 .. F M M SELV ( for 48V only) ( except for 48V ) LPS IP67 SPECIFICATION MODEL CLG-60-12 CLG-60-15 CLG-60-20 CLG-60-24 CLG-60-27 CLG-60-36 CLG-60-48 DC VOLTAGE 12V 15V 20V 24V 27V 36V 48V CONSTANT CURRENT REGION Note.5 8.4 ~ 12V 10.5 ~ 15V 14 ~ 20V 16.8 ~ 24V 18.9 ~ 27V 25.2 ~ 36V 33.6 ~ 48V RATED CURRENT 5A 4A 3A 2.5A 2.3A 1.7A 1.3A CURRENT RANGE 0 ~ 5A 0 ~ 4A 0 ~ 3A 0 ~ 2.5A 0 ~ 2.3A 0 ~ 1.7A 0 ~ 1.3A RATED POWER 60W 60W 60W 60W 62.1W 61.2W 62.4W RIPPLE & NOISE (max.) Note.2 2Vp-p 2.4Vp-p 1.8Vp-p 2.7Vp-p 2.7Vp-p 3.6Vp-p 4.6Vp-p OUTPUT 11.5 ~ 13V 14.5 ~ 16.2V 19.5 ~ 22V 24 ~ 26V 25 ~ 30V 32.5 ~ 39V 43.6 ~ 51.8V VOLTAGE ADJ. RANGE Fixed can be modified between the range above CURRENT ADJ. RANGE Fixed. Can be modified between 3% ~ -25% rated output current VOLTAGE TOLERANCE Note.3 ±10% LINE REGULATION ±3.0% LOAD REGULATION ±5.0% SETUP TIME 500ms / 230VAC 3000ms / 115VAC at full load VOLTAGE RANGE Note.4 90 ~ 295VAC 127 ~ 417VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.94/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve) INPUT EFFICIENCY (Typ.) 85% 86% 87.5% 87% 88% 89% 89% AC CURRENT (Typ.) 0.8A/115VAC 0.4A/230VAC 0.3A/277VAC INRUSH CURRENT(Typ.) COLD START 35A(twidth=45μs measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT <0.75mA / 240VAC 95 ~ 110% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed 13.8 ~ 16V 17.5 ~ 21V 23 ~ 28V 28 ~ 32V 31 ~ 35V 41 ~ 46V 54 ~ 60V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover PROTECTION OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -30 ~ +70℃ (Refer to "Derating Curve") 20 ~ 95% RH non-condensing WORKING HUMIDITY -40 ~ +80℃, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL879, UL8750, UL1310, TUV EN61347-1, EN61347-2-13 independent, CAN/CSA C22.2 No. 223-M91(except for 48V), SAFETY STANDARDS CSA C22.2 No. 250.0-08(except for 48V), CSA C22.2 No. 207-M89(except for 48V), IP67, J61347-1, J61347-2-13 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC EMC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMISSION Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (≧75% load) ; EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547, light industry level (surge 4KV), criteria A MTBF 495.7Khrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 195.6*61.5*38.8mm (L*W*H) 0.86Kg; 16pcs/14.8Kg/0.54CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. Please refer to "DRIVING METHODS OF LED MODULE". 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 7. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. 8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. File Name:CLG-60-SPEC 2014-03-26 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-CLG-60-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL CLG-60 SERIES 60 Watt LED Power Supply Measures: 7.70 x 2.42 x 1.53”” 60W Single Output LED Power Supply CLG-60 s eries Mechanical Specification Case No. 957A Unit:mm 195.6 11.9 171.8 9.6 300±20 300±20 AC/L(Brown) T case 85.9 +V(Red) AC/N(Blue) -V(Black) FG (Green/Yellow) SJTW 18AWG×3C SVT 18AWG×2C ψ4.2×4PL ※ T case: Max. Case Temperature. Block Diagram fosc : 90KHz(115VAC) 120KHz(230VAC) RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION CIRCUIT FG O.L.P. PWM & PFC CONTROL O.C.P. O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 -30 -25 -5 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 295 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:CLG-60-SPEC 2014-03-26 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-CLG-60-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) 32 46.5 61.5 30.75 LOAD (%) 38.8 MEAN WELL CLG-60 SERIES 60 Watt LED Power Supply Measures: 7.70 x 2.42 x 1.53”” 60W Single Output LED Power Supply CLG-60 s eries Power Factor Characteristic Constant Current Mode 1 . 0 0 0 . 9 8 0 . 9 6 0 . 9 4 0 . 9 2 2 7 7 V a c 0 . 9 0 0 . 8 8 2 3 0 V a c 0 . 8 6 1 1 5 V a c 0 . 8 4 0 . 8 2 0 . 8 0 0 . 7 8 5 0 % 6 0 % 7 0 % 8 0 % 9 0 % 1 0 0 % (60W) LOAD EFFICIENCY vs LOAD (48V Model) CLG-60 series possess superior working efficiency that up to 89% can be reached in field applications. 92 88 84 80 76 72 68 277Vac 64 230Vac 60 56 115Vac 52 48 44 40 36 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE This LED power supply is suggested to work in constant current mode area (CC) to drive the LEDs. In the constant current region, the highest voltage at the output of the driver 100 depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. Constant Current area 70 (min.) Hiccup Protection 50 100 Io (%) Typical LED power supply I-V curve File Name:CLG-60-SPEC 2014-03-26 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-CLG-60-power-supply.html h t t p: / / pow e r. sa ge r. c om EFFICIENCY (%) PF Vo(%)