MEAN WELL DRC-100
Specifications
Manufacturer
MEAN WELL
Manufacturers Part #
DRC-100
Industry Aliases
DRC-100
Series
DRC-100
Factory Pack Quantity
1
Application
Battery Charger
Cooling Method
Convection
Dimensions
3.94 x 3.54 x 2.16"
Environmental Conditions
General Purpose
Industry
Industrial
Input Type
85-264 VAC
Mechanical Style
DIN Rail Mount
Number of Outputs
2
Operating Temperature
-30 to +75C, derate linearly from 45-70°C to 60% power
Package Type
DIN Rail Mount
Power
100 W
Subcategory
AC-DC Power Supply
Datasheet
Extracted Text
MEAN WELL DRC-100 SERIES 100W Single Output with Battery Charger (UPS Function) 100 Watt Battery Charger Power Supply DRC-1 0 0 series Measures: 3.94 x 3.54 x 2.16” Bauartgepruft Sicherheit egelma ge od o s bewac g www.tuv.com ID 2000000000 ■ ■ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ■ ℃℃ ■ File Name:DRC-100-SPEC 2014-12-19 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-DRC-100-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL DRC-100 SERIES 100W Single Output with Battery Charger (UPS Function) DRC-100 series 100 Watt Battery Charger Power Supply Measures: 3.94 x 3.54 x 2.16” SPECIFICATION MODEL DRC-100A DRC-100B OUTPUT NUMBER CH1 CH2 CH1 CH2 DC VOLTAGE 13.8V 13.8V 27.6V 27.6V RATED CURRENT 4.5A 2.5A 2.25A 1.25A CURRENT RANGE 0 ~ 7A -------- 0 ~ 3.5A -------- RATED POWER 96.6W 96.6W RIPPLE & NOISE (max.) Note.2 120mVp-p -------- 240mVp-p -------- OUTPUT VOLTAGE ADJ. RANGE CH1:12 ~ 15V CH1:24 ~ 30V VOLTAGE TOLERANCE Note.3 ±1.0% -------- ±1.0% -------- LINE REGULATION ±0.5% -------- ±0.5% -------- LOAD REGULATION ±0.5% -------- ±0.5% -------- SETUP, RISE TIME Note.4 2400ms, 50ms/230VAC 2400ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 50ms/230VAC 10ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC [DC input operation possible by connecting AC/L(+), AC/N(-)] FREQUENCY RANGE 47 ~ 63Hz INPUT EFFICIENCY (Typ.) 87% 89% AC CURRENT (Typ.) 1.8A/115VAC 1.1A/230VAC INRUSH CURRENT (Typ.) COLD START 30A/115VAC 60A/230VAC 105 ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1:14.49 ~ 18.63V CH1:28.98 ~ 37.26V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover BATTERY CUT OFF 10±0.5V 20±1V Relay contact output, ON : AC OK ; OFF : AC Fail ; max. rating : 30V/1A AC OK FUNCTION Relay contact output, OFF : Battery OK ; ON : Battery Low ; max. rating : 30V/1A BATTERY LOW Battery low voltage : < 11V Battery low voltage : < 22V -30 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) on CH1 output VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH (Note 5) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61204-3, light industry level, criteria A MTBF 410.1K hrs min. MIL-HDBK-217F (25℃) 55*90*100mm (W*H*D) OTHERS DIMENSION PACKING 0.37Kg; 30pcs/12.1Kg/0.82CUFT ℃ NOTE File Name:DRC-100-SPEC 2014-12-19 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-DRC-100-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL DRC-100 SERIES 100 Watt Battery Charger Power Supply 100W Single Output with Battery Charger (UPS Function) DRC- 100 series Measures: 3.94 x 3.54 x 2.16” Block Diagram AC OK RL1 ALARM CIRCUIT RL2 Bat. Low EMI FILTER RECTIFIERS POWER +V & I/P & SWITCHING -V RECTIFIER FILTER Bat. + DETECTION Bat. - CIRCUIT PWM Battery Charger O.L.P. CONTROL & O.V.P. Back up Control Derating Curve Static Characteristics 100 100 90 80 80 230VAC Input only 70 60 60 40 50 20 40 -30 -20 0 0 15 30 40 45 50 60 70 (VERTICAL) 90 100 125 135 145 155 165 1 17 75 5 180 200 230 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:DRC-100-SPEC 2014-12-19 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-DRC-100-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) L LO OA AD ( D (% %) ) MEAN WELL DRC-100 SERIES 100 Watt Battery Charger Power Supply 100W Single Output with Battery Charger (UPS Function) DRC- 100 series Measures: 3.94 x 3.54 x 2.16” Suggested Application 1.Backup connection for AC interruption (1) Please refer to Fig1.1 for suggested connection. The power supply charges the battery and provides energy to the load at the same time when AC mains is OK. The battery starts to supply power to the load when AC mains fails. A : 12V B : 24V Load Battery - - + + Bat+ Bat- V+ V- DC OK + +V ADJ Fig 1.1 Suggested system connection 2.Alarm signal for AC OK and battery low (1) Alarm signal is sent out through " AC OK " & " Battery Low " pins via relay contact. (2) An external voltage source is required for this function. The maximum applied voltage is 30V and the maximum sink current is 1A. Please refer to Fig 2.2. (3) Table2.1 explains the alarm function built in the power supply (4) AC OK signal (RL1, referring to Block Diagram) will go into hiccup mode when the overload protection is activated. Function Description Output of alarm The signal is "Low" when the power supply turns ON. Low or short AC OK The signal turns to be "High" when the power supply turns OFF. High or open (External applied voltage 30V max.) The signal is "Low" when the voltage of battery is under A:11V, B:22V. Low or short Battery Low The signal is "High" when the voltage of battery is above A:11V, B:22V. High or open (External applied voltage 30V max.) Table 2.1 Explanation of alarm signal AC OK (Battery low) R External voltage sorece (V) and resistor (R) V (The max. Sink is 1A and 30V) Fig 2.2 Internal circuit of AC OK (Battery Low), via relay contact File Name:DRC-100-SPEC 2014-12-19 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-DRC-100-power-supply.html h t t p: / / pow e r. sa ge r. c om 35 MEAN WELL DRC-100 SERIES 100 Watt Battery Charger Power Supply 100W Single Output with Battery Charger (UPS Function) DRC- 100 series Measures: 3.94 x 3.54 x 2.16” Mechanical Specification Case No.973A Unit:mm 55 100 3.81x9 10 9 8 7 6 5 4 3 2 1 TB2 DC OK + +V ADJ TB1 3 2 1 7.5 7.5 Terminal Pin No. Assignment (TB1): Pin No. Assignment 1 AC/L or DC+ 2 AC/N or DC- 3 FG Terminal Pin No. Assignment (TB2): Pin No. Assignment Pin No. Assignment 1,2 -V 6 Bat. - 3,4 +V 7,8 AC OK 5 Bat. + 9,10 Bat. Low Installation Instruction This series fits DIN rail TS35/7.5 or TS35/15. (This diagram is for reference. The rail is not included with unit.) Back View File Name:DRC-100-SPEC 2014-12-19 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-DRC-100-power-supply.html h t t p: / / pow e r. sa ge r. c om 90
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the DRC-100?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods