MEAN WELL ELN-60-24D
Specifications
Manufacturer
MEAN WELL
Manufacturers Part #
ELN-60-24D
Industry Aliases
ELN-60-24D
Series
ELN-60
Factory Pack Quantity
1
Adjust Type
Voltage & Current
Application
LED Power Supply
Compliance
General Safety
Cooling Method
Convection
Dimensions
7.13 x 2.42 x 1.38"
Dimming Capability
Yes
Driving Method
Constant Current
Efficiency
87%
Environmental Conditions
General Purpose
Industry
LED Lighting
Input Type
90-264 VAC
IP Rating
IP64
Mechanical Style
LED Power Supply
Number of Outputs
1
Operating Temperature
-20 to +60°C derate linearly from 40-60°C to 50% power
Output Amps 1
2.5 A
Output Voltage V1 Nominal
12-24 V
Package Type
Plastic
Power
60 W
Subcategory
AC-DC Power Supply
Datasheet
Extracted Text
60W Single Output Class 2 Switching Power Supply ELN-60 series ■7�������, ‧=��.������������67������’� ‧/����������,2&����������6�.���������6�.��.����’� ‧������’������������.������ ‧9����)������������������������’�������%��&��8���������/��.�� ‧��������������’��������,�>���-�?-����@��/A"?/����@���������� ‧7�����������������������%��&B/4*��.�� ‧�����Ⅱ��%���������7C ‧��������%������ ‧/���5/2 ‧2����������53-��’&���’�����.��’��’�������������?�����<@ ‧���D������������)������ ‧5�%�����&�’&����������� ‧������%������� IP64 ?���*;�����@ ?�E�������*;�@ LPS SPECIFICATION MODEL ELN-60-9 ELN-60-12 ELN-60-15 ELN-60-24 ELN-60-27 ELN-60-48 DC VOLTAGE 9V 12V 15V 24V 27V 48V LED OPERATION VOLTAGE Note.8 3 ~ 9V 6 ~ 12V 7.5 ~ 15V 12 ~ 24V 13.5 ~ 27V 24 ~ 48V RATED CURRENT 5A 5A 4A 2.5A 2.3A 1.3A CURRENT RANGE 0 ~ 5A 0 ~ 5A 0 ~ 4A 0 ~ 2.5A 0 ~ 2.3A 0 ~ 1.3A RATED POWER 45W 60W 60W 60W 62.1W 62.5W RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 8.7 ~ 10.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V 24.3 ~ 29.7V 43.2 ~ 52.8V OUTPUT VOLTAGE ADJ. RANGE Note.7 Can be adjusted by internal potentiometer SVR1 CURRENT ADJ. RANGE Note.7 -25% ~ 3%. Can be adjusted by internal potentiometer SVR2 VOLTAGE TOLERANCE Note.3 ±5.0% LINE REGULATION ±1.0% LOAD REGULATION ±2.0% SETUP, RISE TIME Note.6 500ms, 30ms / 230VAC 1500ms, 30ms / 115VAC at full load HOLD UP TIME (Typ.) 50ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 82% 85% 86% 87% 87% 88% INPUT AC CURRENT (Typ.) 1.2A/115VAC 0.7A/230VAC INRUSH CURRENT (Typ.) COLD START 60A(twidth=600μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT 0.25mA / 240VAC 95 ~ 110% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION 11 ~ 13.5V 13.8 ~ 16V 17.5 ~ 21V 28 ~ 32V 31 ~ 37V 54 ~ 60V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz FUNCTION DIMMING CONTROL (OPTIONAL) -20 ~ +60℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH EMC EMC EMISSION Compliance to EN55032 (CISPR32) Class B, EN61000-3-2 Class A, EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 603Khrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 181*61.5*35mm (L*W*H) 0.4Kg; 24pcs/11Kg/0.75CUFT PACKING ���������������������������������������������������������������������������℃��������������������� NOTE �� �����!��������������������"#$������%���&������’���(�%���������)%�������������%��&������!*+�������������������� �����������,�����������������������������’����������������’�������� *�-������’������������������%�����.����’��/������&��0�&��������&���������������������������� ���&���%���������������������������������&��%��������������������������%��&������1��������2����3"������������%����������������&� ����������������������&�������1��������������������������)1������3"�-������.����&����������������������’���� 4�5��’�&��������������������������������������������’��6�77�&���%����������������������������&����������� +�������.����’��������8������&���’&�&�2� ����&�/�9:������������������������������.���������8������&���’&�&�2� ����&�/�9� ;���������������������������’�����%��&���&����������������.����’����’����.���&�����&��������������������’������53-�������������������� <��&�������’&�������������������’&���’��������������3=����������/������&��0%��&������������&�����������&���������������&������ File Name:ELN-60-SPEC 2017-07-14 60W Single Output Class 2 Switching Power Supply ELN-60 series Mechanical Specification Case No.960A Unit:mm 181 6.26 300±20 2-R2.5 +V(Red) 300±20 -V(Black) AC/L(Brown) SVT 18AWG×2C Tcase AC/N(Blue) 116.5 SVT 18AWG×2C 6.26 ※ T case: Max. Case Temperature. OUTPUT(with optional dimming function) +V(Red) -V(Black) Output voltage and current adjustment : remove the upper case and adjust through SVR1 & SVR2 DIM+(Blue) UL2464 18AWG×4C DIM-(White) shown in the diagram. SVR1 SVR2 SVR1 Output voltage adjustment SVR2 Output current adjustment fosc : 60KHz Block Diagram RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DIM- DETECTION CIRCUIT 10V PWM O.L.P. PWM or CONTROL O.C.P. 1~10V O.V.P. DIM+ Optional Dimming Control Derating Derating Curve Curve Static Characteristics 100 100 90 80 80 70 60 50 60 40 50 20 40 -20 -15 -5 004 15 3004550 60 (HORIZONTAL) 90 100 125 135 145 155 165 175 175 180 200 230 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:ELN-60-SPEC 2017-07-14 LOAD LOAD LOAD (%) (%) (%) 21.25 61.5 15 LOAD LOAD (%) (%) 21.25 35 60W Single Output Class 2 Switching Power Supply ELN-60 series Dimming Control (Optional) Level of output current can be adjusted through the dimming control function. When there is no signal sending to the control wires (open circuit between the two control wires), the power supply unit will operate as 0V (D-type) or 0% duty (P-type) of input signal and hence the output current will be zero. (1)1~10V (D type, & : ELN-60- 12 D) 95% DIM+ 100% 90% 80% + 70% Vdc 60% 45% 50% 40% 30% DIM- 20% Vdc:1~10V 10% 5% 0% 0 1 2 3 4 5 6 7 8 9 10 DC Input (2)PWM (P type, & : ELN-60- 12 P) 95% 100% V 90% f: 100Hz ~ 3KHz 80% 70% 60% f 60% 10V 50% 40% 30% 20% 20% f 10% t1 t2 0% t1 Duty= ,0 ~ 100% 0% 15% 20% 30% 40% 50% 60% 70% 80% 90% 100% t1+t2 Lo:0V Duty Cycle Hi:10V File Name:ELN-60-SPEC 2017-07-14 Output Current Output Current
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the ELN-60-24D?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods