MEAN WELL HLG-185H-C1400A

MEAN WELL HLG-185H-C SERIES 185 Watt LED Power Supply 200W Single Output LED Power Supply HLG-185H-C series Measures: 8.98 x 2.68 x 1.53” ■ ’ – �    �”   œ ’  š  › �‡…  ’   �‘    ƒ‰ž �  –     œ   œ   �        �  —          �Ž‚ˆ œ Ž‚           �      š˜   ™€   › �     œ  œ     �ˆ   š ›     IP65 IP67 ‘“†…„‘…   – Ž‚        —       ‡ – Ž‚ˆ      —      ˜   ™€   
š  › – Ž‚ˆ        €­ ™­““    SPECIFICATION MODEL HLG-185H-C500 HLG-185H-C700 HLG-185H-C1050 HLG-185H-C1400 RATED CURRENT 500mA 700mA 1050mA 1400mA CURRENT ACCURACY ±5.0% CONSTANT CURRENT REGION Note.6 200V ~ 400V 143V ~ 286V 95V ~ 190V 71V ~ 143V RATED POWER 200W 200.2W 199.5W 200.2W RIPPLE CURRENT ±5% OUTPUT RIPPLE & NOISE 2Vp-p 1.5Vp-p 1Vp-p 1Vp-p Can be adjusted by internal potentiometer (A type only) CURRENT ADJ. RANGE 250 ~ 500mA 350 ~ 700mA 525 ~ 1050mA 700 ~ 1400mA LINE REGULATION ±1% ±1% ±1% ±1% SETUP, RISE TIME 1000ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC at full load HOLD UP TIME (Typ.) 16ms at full load 230VAC / 115VAC VOLTAGE RANGE Note.2 90 ~ 305VAC 127VDC ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading≧≧ 50% at 115VAC/230VAC input and output loading 75% at 277VAC input INPUT EFFICIENCY (Typ.) 94% 94% 94% 94% AC CURRENT (Typ.) 2A / 115VAC 1A / 230VAC 0.85A / 277VAC INRUSH CURRENT (Typ.) μ COLD START 55A(twidth=900 s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed 450 ~ 470V 320 ~ 340V 210 ~ 225V 160 ~ 170V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE -40 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 10 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.3 UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP65 or IP67, J61347-1, J61347-2-13 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (≧50% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, heavy industry level (surge L,N-FG: 4KV), criteria A EMC IMMUNITY MTBF 191.9K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 228*68*38.8mm (L*W*H) 1.15Kg; 12pcs/14.8Kg/0.8CUFT PACKING                 ℃    NOTE 
                      ­€    ­‚ƒ„…    †‡ˆ ‰                       Š   ­€               Š   …Š ­€
         ‹    ‚    Œ
‹ŽŽ† €­‘
  ’ “­
€
”“­Œ ˆ   Š    ­      •  “­
                   File Name:HLG-185H-C-SPEC 2016-02-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HLG-185H-C-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL HLG-185H-C SERIES 185 Watt LED Power Supply 200W Single Output LED Power Supply HLG-185H-C series Measures: 8.98 x 2.68 x 1.53” Mechanical Specification Case No.994D Unit:mm A Type:(HLG-185H-C_A) 228 12 204 9.6 Io 300±20 ADJ. FG (Green/Yellow) T case 102 300±20 AC/L(Brown) AC/N(Blue) SJTW 16AWG×3C -V(Black) +V(Red) STW 16AWG×2C(for HLG-185H-C500) SJTW 16AWG×2C(for others) ψ× 4.2 4PL ※ T case: Max. Case Temperature. ※ IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) B Type:(HLG-185H-C_B) 228 12 204 9.6 300±20 SJTW 16AWG×2C 300±20 DIM+(Blue) FG (Green/Yellow) T case DIM-(White) 102 AC/L(Brown) SJTW 16AWG×3C AC/N(Blue) -V(Black) +V(Red) STW 16AWG×2C(for HLG-185H-C500) SJTW 16AWG×2C(for others) ψ× 4.2 4PL ※ T case: Max. Case Temperature. D Type(option):(HLG-185H-C_D) 228 12 204 9.6 300±20 FG (Green/Yellow) T case 102 300±20 AC/L(Brown) AC/N(Blue) SJTW 16AWG×3C -V(Black) +V(Red) STW 16AWG×2C(for HLG-185H-C500) SJTW 16AWG×2C(for others) ψ× 4.2 4PL ※ T case: Max. Case Temperature. ※ IP67 rated. Timer dimming function, contact MEAN WELL for details. File Name:HLG-185H-C-SPEC 2016-02-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HLG-185H-C-power-supply.html h t t p: / / pow e r. sa ge r. c om 9.4 34.2 9.4 9.4 34.2 9.4 9.4 34.2 9.4 68 68 68 34 34 34 38.8 38.8 38.8 MEAN WELL HLG-185H-C SERIES 185 Watt LED Power Supply 200W Single Output LED Power Supply HLG-185H-C series Measures: 8.98 x 2.68 x 1.53” Block Diagram PFC fosc : 70KHz PWM fosc : 60KHz EMI FILTER RECTIFIERS POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER DIM+ O.L.P. DIM- (B Type) O.T.P. O.L.P. DETECTION FG CIRCUIT PWM & PFC CONTROL O.V.P. Derating Curve Static Characteristics 100 100 90 C1400 80 80 Others 70 60 60 40 50 20 40 (HORIZONTAL) -40 -20 -10 0 15 30 50 60 70 90 100 125 135 145 155 165 175 180 200 230 305 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz Power Power Factor Factor Characteristic Characteristic Constant Current Mode 1 0.98 0.96 0.94 277V 230V 0.92 115V 0.9 0.88 0.86 50% 60% 70% 80% 90% 100% (200W) LOAD File Name:HLG-185H-C-SPEC 2016-02-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HLG-185H-C-power-supply.html h t t p: / / pow e r. sa ge r. c om PF LOAD (%) LOAD (%) MEAN WELL HLG-185H-C SERIES 185 Watt LED Power Supply 200W Single Output LED Power Supply HLG-185H-C series Measures: 8.98 x 2.68 x 1.53” EFFICIENCY EFFICIENCY vs vs LOAD LOAD (48V (HLG-185H-C700A Model) Model) HLG-185H-C series possess superior working efficiency that up to 94% can be reached in field applications. 95 93 91 89 87 277V 85 230V 115V 83 81 79 77 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE A typical LED power supply may work in "constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CC characteristic can be operated at CC mode (direct drive). In the constant current region, the highest voltage at the output of the driver 100 depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. Constant Current region 50 100 Io (%) Typical LED power supply I-V curve File Name:HLG-185H-C-SPEC 2016-02-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HLG-185H-C-power-supply.html h t t p: / / pow e r. sa ge r. c om EFFICIENCY (%) Vo(%) MEAN WELL HLG-185H-C SERIES 185 Watt LED Power Supply 200W Single Output LED Power Supply HLG-185H-C series Measures: 8.98 x 2.68 x 1.53” DIMMING OPERATION DIM+(Blue) FG (Green/Yellow) DIM-(White) HLG-185H-C AC/L(Brown) B Type AC/N(Blue) -V(Black) +V(Red) ※ Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. ※ Please DO NOT connect "DIM-" to "-V". ※ Reference resistance value for output current adjustment (Typical) Single driver 10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ OPEN Resistance Multiple drivers value (N=driver quantity for synchronized 10KΩ/N 20KΩ/N 30KΩ/N 40KΩ/N 50KΩ/N 60KΩ/N 70KΩ/N 80KΩ/N 90KΩ/N 100KΩ/N ----- dimming operation) Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% ※ 1 ~ 10V dimming function for output current adjustment (Typical) Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% ※ 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% ※Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to achieve 0% brightness of the lighting fixture connecting to the LED power supply unit. ※Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. Dimming connection diagram for turning the lighting fixture ON/OFF : N FG L Switch Adjuster Relay 10K~100K Ohms resistance 1~10V DC Voltage 10V PWM Signal Blue DIM+ Green/ White HLG-185H-C DIM- Yellow AC/L Black Brown V(-) B Type Red LED Lighting Fixture V(+) AC/N Blue Using a switch and relay can turn ON/OFF the lighting fixture. 1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:HLG-185H-C-SPEC 2016-02-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HLG-185H-C-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL HLG-185H-C SERIES 185 Watt LED Power Supply 200W Single Output LED Power Supply HLG-185H-C series Measures: 8.98 x 2.68 x 1.53” WATERPROOF CONNECTION ◎ Waterproof connector Waterproof connector can be assembled on the output cable of HLG-185H-C to operate in dry/wet/damp or outdoor environment. AC HLG-185H-C source I/P O/P Size Pin Configuration (Female) Size Pin Configuration (Female) M12 M15 4-PIN 5-PIN 2-PIN 5A/PIN 5A/PIN 12A/PIN Order No. M12-04 M12-05 Order No. M15-02 LED Lamp Suitable Current 10A max. 10A max. Suitable Current 12A max. ◎ Cable Joiner CJ04-1 suitable for 14AWG~16AWG 66 CJ04-2 suitable for 18AWG~22AWG 26 20 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG-185H-C O/P Wires ※CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. File Name:HLG-185H-C-SPEC 2016-02-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HLG-185H-C-power-supply.html h t t p: / / pow e r. sa ge r. c om ψ25