MEAN WELL HLG-320H-C2800B

320W Constant Current Mode LED Driver HLG-320H-C series 110 M M IP65 IP67 TypeHL ■ Features ■ Applications ‧ConstantCurrentmodeoutput ‧ LEDstreetlighting ‧ MetalhousingwithClassⅠdesign ‧LEDfishinglamp ‧ Built-inactivePFCfunction ‧LEDharborlighting ‧IP67/IP65designforindoororoutdoorinstallations ‧ LEDbuildingarchitecturallighting ‧ Functionoptions:outputadjustableviapotentiometer; ‧ LEDgreenhouselighting 3in1dimming ‧ LEDbaylighting ‧ Typicallifetime>62000hours ‧Type“HL”foruseinClassⅠ,Division2 ‧ 7yearswarranty hazardous(Classified)location. ■ Description HLG-320H-Cseriesisa320WLEDAC/DCLEDdriverfeaturingtheconstantcurrentmodeandhighvoltage output.HLG-320H-Coperatesfrom90~305VACandoffersmodelswithdifferentratedcurrentrangingbetween 700mAand3500mA.Thankstothehighefficiencyupto94%,withthefanlessdesign,theentireseriesis abletooperatefor-40℃~+85℃ casetemperatureunderfreeairconvection.Thedesignofmetalhousing andIP67/IP65ingressprotectionlevelallowsthisseriestofitbothindoorandoutdoorapplications. HLG-320H-Cisequippedwithvariousfunctionoptions,suchasdimmingmethodologies,soastoprovide theoptimaldesignflexibilityforLEDlightingsystem. ■ ModelEncoding HLG-320H -C1050 A Functionoptions Ratedoutputcurrent(700/1050/1400/1750/2100/2800/3500mA) Highinputvoltageupto305VAC Ratedwattage Seriesname Type IPLevel Function Note A IP65 Ioadjustablethroughbuilt-inpotentiometer. InStock B IP67 3in1dimmingfunction(0~10Vdc,10VPWMsignalandresistance) InStock DA IP67 DALIcontroltechnology. InStock Dx IP67 Built-inSmarttimerdimmingfunctionbyuserrequest. Byrequest D2 IP67 Built-inSmarttimerdimmingandprogrammablefunction. InStock File Name:HLG-320H-C-SPEC 2018-05-09 320W Constant Current Mode LED Driver HLG-320H-C series SPECIFICATION MODEL HLG-320H-C700 HLG-320H-C1050 HLG-320H-C1400 HLG-320H-C1750 HLG-320H-C2100 HLG-320H-C2800 HLG-320H-C3500 1050mA 1400mA RATED CURRENT 700mA 1750mA 2100mA 2800mA 3500mA RATED POWER 299.6W 320.25W 320.6W 320.25W 319.2W 319.2W 318.5W CONSTANT CURRENT REGION Note.2 214 ~ 428V 152 ~ 305V 114 ~ 229V 91 ~ 183V 76 ~ 152V 57 ~ 114V 46 ~ 91V OPEN CIRCUIT VOLTAGE (max.) 435V 311V 234V 187V 156V 118V 95V Adjustable for A-Type only (via built-in potentiometer) OUTPUT CURRENT ADJ. RANGE 350 ~ 700mA 525 ~ 1050mA 700 ~ 1400mA 875 ~ 1750mA 1050 ~ 2100mA 1400 ~ 2800mA 1750 ~ 3500mA CURRENT RIPPLE 5.0% max. @rated current CURRENT TOLERANCE ±5% SET UP TIME Note.4 1000ms/115VAC, or 500ms/230VAC 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.3 (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE 47 ~ 63Hz PF≧0.98/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC @full load POWER FACTOR (Typ.) (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) THD< 20% (@ load≧50% /115VAC, 230VAC; @ load≧70%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section) INPUT EFFICIENCY (Typ.) 94% 94% 94% 94% 94% 94% 94% AC CURRENT (Typ.) 3.5A / 115VAC 1.65A / 230VAC 1.45A / 277VAC INRUSH CURRENT(Typ.) COLD START 70A(twidth=1200 s measured at 50% I μ peak) at 230VAC; Per NEMA 410 MAX. No. of PSUs on 16A 2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT 436 ~ 460V 320 ~ 352V 235 ~ 252V 192 ~ 211V 160 ~ 175V 120 ~ 132V 96 ~ 105V PROTECTION OVER VOLTAGE Shut down and latch off o/p voltage, re-power on to recover Shut down and latch off o/p voltage, re-power on to recover OVER TEMPERATURE Tcase=-40 ~ +85℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) WORKING TEMP. MAX. CASE TEMP. Tcase=+85℃ 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +80℃, 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13, EN62384 independent; SAFETY STANDARDS GB19510.1,GB19510.14,EAC TP TC 004, IP65 or IP67 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (@ load≧50%) ; EN61000-3-3,GB17743andGB17625.1,EAC TP TC 020 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV),EAC TP TC 020 EMC IMMUNITY MTBF 168.2K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 252*90*43.8mm (L*W*H) 1.88Kg; 8pcs/16Kg/0.92CUFT PACKING 1.AllparametersNOTspeciallymentionedaremeasuredat230VACinput,ratedcurrentand25℃ofambienttemperature. NOTE 2.Pleasereferto"DRIVINGMETHODSOFLEDMODULE". 3.De-ratingmaybeneededunderlowinputvoltages.Pleasereferto“STATICCHARACTERISTIC”sectionsfordetails. 4.Lengthofsetuptimeismeasuredatfirstcoldstart.TurningON/OFFthedrivermayleadtoincreaseofthesetuptime. 5.Thedriverisconsideredasacomponentthatwillbeoperatedincombinationwithfinalequipment.SinceEMCperformancewillbeaffectedbythe completeinstallation,thefinalequipmentmanufacturersmustre-qualifyEMCDirectiveonthecompleteinstallationagain. 6.TofulfillrequirementsofthelatestErPregulationforlightingfixtures,thisLEDdrivercanonlybeusedbehindaswitchwithoutpermanently connectedtothemains. 7.Thisseriesmeetsthetypicallifeexpectancyof>62,000hoursofoperationwhenTcase,particularlytcpoint(orTMP,perDLC),isabout75℃orless. 8.PleaserefertothewarrantystatementonMEANWELL'swebsiteathttp://www.meanwell.com 9.Theambienttemperaturederatingof3.5℃/1000mwithfanlessmodelsandof5℃/1000mwithfanmodelsforoperatingaltitudehigherthan2000m(6500ft). File Name:HLG-320H-C-SPEC 2018-05-09 320W Constant Current Mode LED Driver HLG-320H-C series BLOCK DIAGRAM Fosc(PFC) : 45KHz Fosc(PWM) : 70KHz RECTIFIERS EMI FILTER POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER DIM+ O.L.P. DIM- (B Type) DETECTION FG O.L.P. PWM CIRCUIT PFC CONTROL CONTROL O.V.P. DRIVING METHODS OF LED MODULE ※ This series works in constant current mode to directly drive the LEDs. In the constant current region, the highest voltage at the output of the driver 100 depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. Constant Current area 50 50 100 Io (%) Typical output current normalized by rated current (%) File Name:HLG-320H-C-SPEC 2018-05-09 Vo(%) 320W Constant Current Mode LED Driver HLG-320H-C series DIMMING OPERATION +V(Brown) FG (Green/Yellow) -V(Blue) AC/L(Brown) AC/N(Blue) DIM+(Gray)* HLG-320H-C DIM-(Black)** * DIM+ for B-Type DA+ for DA-Type PROG+ for D2-Type * *DIM- for B-Type DA- for DA-Type ※ 3 in 1 dimming function (for B-Type) PROG- for D2-Type ‧Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. ‧Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. ‧Dimming source current from power supply: 100μA (typ.) ◎ Applying additive 0 ~ 10VDC 100% 90% 80% + + +V 70% 60% - - -V 50% DIM+ 40% + 30% Additive Voltage - 20% DIM- 10% 0% “DO NOT connect "DIM- to -V" 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage ◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% 90% 80% + +V + 70% 60% - - -V 50% DIM+ 40% 30% Additive PWM signal 20% DIM- 10% 0% “DO NOT connect "DIM- to -V" 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input ◎ Applying additive resistance: 100% 90% 80% + + +V 70% 60% - - -V 50% DIM+ 40% Additive Resistance 30% 20% DIM- 10% “DO NOT connect "DIM- to -V" 0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for
synchronized
dimming
operation) Dimming input: Additive resistance Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< Iout<6%. 2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle. File Name:HLG-320H-C-SPEC 2018-05-09 Output current (%) Output current (%) Output current (%) 320W Constant Current Mode LED Driver HLG-320H-C series ※ DALI Interface (primary side; for DA-Type) ‧Apply DALI signal between DA+ and DA-. ‧DALI protocol comprises 16 groups and 64 addresses. ‧First step is fixed at 8% of output. Please contact MEAN WELL for other setup. ※ Smart timer dimming function (for Dxx-Type by User definition) MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14 consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed, please contact MEAN WELL for details. Ex : ◎ D01-Type: the profile recommended for residential lighting Set up for D01-Type in Smart timer dimming software program: T1 T2 T3 T4 TIME** 06:00 07:00 11:00 --- LEVEL** 100% 70% 50% 70% Operating Time(HH:MM) **: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance: [1] The power supply will switch to the constant current level at 100% starting from 6:00pm. [2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on. [3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on. [4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 8:00am, which is 14:00 after the power supply turns on. Ex: ◎ D02-Type: the profile recommended for street lighting Set up for D02-Type in Smart timer dimming software program: T1 T2 T3 T4 T5 TIME** 01:00 03:00 8:00 11:00 --- LEVEL** 50% 80% 100% 60% 80% Operating Time(HH:MM) **: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance: [1] The power supply will switch to the constant current level at 50% starting from 5:00pm. [2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on. [3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on. [4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on. [5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on. File Name:HLG-320H-C-SPEC 2018-05-09 Dimming Level(%) Dimming Level(%) 320W Constant Current Mode LED Driver HLG-320H-C series OUTPUT LOAD vs TEMPERATURE 230VAC 100 100 80 80 110VAC 60 60 40 40 20 20 -40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) -40 -25 0 20 45 55 65 75 85 (HORIZONTAL) AMBIENT TEMPERATURE,Ta (℃) Tcase (℃) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC ※ Tcase at 75℃ 1.00 100 0.95 0.90 90 0.85 80 0.80 277VAC 0.75 70 230VAC 0.70 115VAC 60 0.65 0.60 50 0.55 40 0.50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% (320W) 90 110 125 135 145 155 165 175 180 200 230 305 LOAD INPUT VOLTAGE (V) 60Hz TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD HLG-320H-C series possess superior working efficiency that up to 94% can ※ 1050mA Model, Tcase at 75℃ be reached in field applications. ※ 1050mA Model, Tcase at 75℃ 60 100% 50 95% 40 90% 277VAC 277VAC 30 85% 230VAC 230VAC 20 115VAC 80% 115VAC 10 75% 0 70% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD LOAD File Name:HLG-320H-C-SPEC 2018-05-09 THD(%) LOAD (%) LOAD (%) PF EFFICIENCY(%) LOAD (%) 320W Constant Current Mode LED Driver HLG-320H-C series Ex: ◎ D03-Type: the profile recommended for tunnel lighting Set up for D03-Type in Smart timer dimming software program: T1 T2 T3 TIME** 01:30 11:00 --- LEVEL** 70% 100% 70% Operating Time(HH:MM) **: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance: [1] The power supply will switch to the constant current level at 70% starting from 4:30pm. [2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on. [3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on. File Name:HLG-320H-C-SPEC 2018-05-09 Dimming Level(%) 320W Constant Current Mode LED Driver HLG-320H-C series LIFE
TIME 120 100 80 60 40 20 0 20 30 40 50 60 70 80 90 Tcase ( ) ℃ File Name:HLG-320H-C-SPEC 2018-05-09 LIFETIME(Kh) 320W Constant Current Mode LED Driver HLG-320H-C series MECHANICAL SPECIFICATION Case No.228 Unit:mm ※ A-Type 252 13.4 225.2 8.9 300±20 +V(Brown) -V(Blue) 300±20 SOOW 17AWG&H07RN-F 1.0mm²x2C FG (Green/Yellow) 81.6 tc (for HLG-3 20H-C700&C1050) AC/L(Brown) SJOW 17AWG &H05RN-F 1.0mm²x2C(for others) AC/N(Blue) Io SJOW 17AWG&H05RN-F 1.0mm²x3C ADJ. ψ4.5×4PL tc ‧ : Max. Case Temperature ※ B/DA/D2-Type 252 13.4 225.2 300±20 8.9 SOOW 17AWG&H07RN-F 1.0mm²x2C (for HLG-320H-C700&C1050) SJOW 17AWG&H05RN-F 1.0mm²x2C(for others) +V(Brown) -V(Blue) 300±20 FG (Green/Yellow) 300±20 81.6 tc AC/L(Brown) DIM+(Gray)* AC/N(Blue) SJOW 17AWG&H05RN-F 1.0mm²x3C DIM-(Black)** SJOW 17AWG&H05RN-F 1.0mm²x2C * DIM+ for B-Type ψ4.5×4PL DA+ for DA-Type PROG+ for D2-Type * *DIM- for B-Type tc ‧ : Max. Case Temperature DA- for DA-Type PROG- for D2-Type INSTALLATION MANUAL Please refer to:http://www.meanwell.com/manual.html File Name:HLG-320H-C-SPEC 2018-05-09 17 17 17 40 17 40 90 90 45 45 43.8 43.8