MEAN WELL HLN-80H-20A

Mean Well HLN-80H SERIES 80 Watt LED Power Supply 80W Single Output Switching Power Supply HLN-80H series Measures: 7.13 x 2.42 x 1.38” ■ „    �‚    ƒ „  …  †‡  ˆ �  „ ‰  �    Š   ƒ ‹    ƒ ‹    ƒ ‹   Œ  � 
Ž ‰      �‹   
    
      Œ   �„Ž           �     �‘   ŒŒ ‰  …   ­€     ˆ �Š
 ‰  ’“   Œ     � Œ   ‰ Ž    ‰   �Š
 ‰  Ž ƒ Œ         �† Ž  Ž     IP64 … ‰   •‡  Žˆ … ”  ‰   •‡  ˆ        ‹           
        Π             
    
       ­€      SPECIFICATION MODEL HLN-80H-12 HLN-80H-15 HLN-80H-20 HLN-80H-24 HLN-80H-30 HLN-80H-36 HLN-80H-42 HLN-80H-48 HLN-80H-54 DC VOLTAGE 12V 15V 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.4 7.2 ~12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V RATED CURRENT 5A 5A 4A 3.4A 2.7A 2.3A 1.95A 1.7A 1.5A RATED POWER 60W 75W 80W 81.6W 81W 82.8W 81.9W 81.6W 81W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 38 ~ 46V 43 ~ 53V 49 ~ 58V OUTPUT Can be adjusted by internal potentiometer A type only CURRENT ADJ. RANGE 1.38 ~ 2.3A 1.17 ~ 1.95A 3 ~ 5A 3 ~ 5A 2.4 ~ 4A 2.04 ~ 3.4A 1.62 ~ 2.7A 1.02 ~ 1.7A 0.9 ~ 1.5A ±1.0% ±1.0% VOLTAGE TOLERANCE Note.3 ±2.5% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±2.0% ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME Note.8 1200ms,80ms/115VAC 500ms,80ms/230VAC at full load ; B type 1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% load HOLD UP TIME (Typ.) 16ms at full load 230VAC /115VAC VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.96/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input INPUT EFFICIENCY (Typ.) 88% 89% 90% 90.5% 91% 91% 91% 91% 91% AC CURRENT (Typ.) 0.85A / 115VAC 0.425A / 230VAC 0.4A / 277VAC INRUSH CURRENT(Typ.) COLD START 70A(twidth=485μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC 95 ~ 108% OVER CURRENT Note.4 Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed 14 ~ 17V 18 ~ 24V 23 ~ 30V 28 ~ 35V 35 ~ 43V 41 ~ 49V 48 ~ 58V 54 ~ 63V 59 ~ 68V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover -40 ~ +50℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY -40 ~ +80℃, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 40℃) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08(except for 48V, 54V), EN61347-1, EN61347-2-13 independent ; IP64, J61347-1, SAFETY STANDARDS Note.7 J61347-2-13 approved ; Design refer to UL60950-1, TUV EN60950-1 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (≧≧ 60% load, 12V model 65% load) ; EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria B MTBF 356.4Khrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 181*61.5*35mm (L*W*H) 0.5Kg; 24pcs/13Kg/0.75CUFT PACKING   Œ   ‹‘  Ž Œ     Œ    †  •      ‡ ‰℃ Œ
  Œ   NOTE  – —    Œ    €˜ ‰

Ž   ™     Œ    ‰ — š‰     † ‘            •               ‰   ™“– › €’‘‹“Š ‹„ ’“ €‹“‚’™ ‡ “  ŒŽ
             œ     ‰  Œ      Ž Ž š Š‰ Ž  ’€    ‰   ’‡ž• Š‡††• ›š• „     ‰    Œ  Œ      ‰  ‘ ‹ƒ‹„„   Ž ŒŽ      ‰     Œ  ž ‘  Ž         Œ    
    Œ
   ‰ ŸŒ  Š ’€ ‰ Œ 
‰‰  
Ž   Œ   •  ‰ ŸŒ  Œ‰  Œ  Ÿ‰Ž ’€ “     Œ      ‘ ‰‰  Ÿ Œ  ‰    ’    ‰   ‰” •  ’“  Ž  Ž
 
     Œ  Ž       Œ File Name:HLN-80H-SPEC 2015-07-31 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HLN-80H-power-supply.html h t t p: / / pow e r. sa ge r. c om Mean Well HLN-80H SERIES 80 Watt LED Power Supply 80W Single Output Switching Power Supply HLN-80H series Measures: 7.13 x 2.42 x 1.38” Mechanical Specification Case No.HLN-80A Unit:mm A Type:(HLN-80H-_A) 181 6.26 300±20 2-R2.5 +V(Red) 300±20 90.5 -V(Black) SVT 18AWG×2C AC/L(Brown) T case AC/N(Blue) FG (Green/Yellow) SVT 18AWG×3C 6.26 ※ T case: Max. Case Temperature. ※IP64 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (can access by removing the rubber stopper on the case). B Type:(HLN-80H-_B) Case No.HLN-80B Unit:mm 181 6.26 300±20 2-R2.5 +V(Red) 300±20 -V(Black) 90.5 DIM+(Blue) Style 2464 18AWG×4C AC/L(Brown) DIM-(White) T case AC/N(Blue) FG (Green/Yellow) SVT 18AWG×3C 6.26 ※ T case: Max. Case Temperature. DIM+ / DIM- : Commercial wall dimmer 1 ~ 10V & PWM control function Block Diagram fosc : 100KHz RECTIFIERS EMI FILTER POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER DIM+ O.L.P. DIM- (B Type) O.T.P. O.L.P. DETECTION FG CIRCUIT PWM & PFC CONTROL O.V.P. File Name:HLN-80H-SPEC 2015-07-31 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HLN-80H-power-supply.html h t t p: / / pow e r. sa ge r. c om 21.25 21.25 61.5 61.5 30.75 30.75 2.3 21.25 21.25 35 35 Mean Well HLN-80H SERIES 80 Watt LED Power Supply Measures: 7.13 x 2.42 x 1.38” 80W Single Output Switching Power Supply HLN-80H series Derating Curve Static Characteristics 100 100 90 80 80 230VAC Input only 70 60 60 40 50 20 40 -40 -25 -10 0 15 30 40 50 60 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 305 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz Power Factor Characteristic Constant Current Mode 1.00 0.98 0.96 0.94 0.92 277Vac 0.90 0.88 230Vac 0.86 115Vac 0.84 0.82 0.80 0.78 50% 60% 70% 80% 90% 100% (80W) LOAD EFFICIENCY vs LOAD (48V Model) HLN-80H series possess superior working efficiency that up to 91% can be reached in field applications. 92 88 84 80 277Vac 230Vac 76 115Vac 72 68 64 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:HLN-80H-SPEC 2015-07-31 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HLN-80H-power-supply.html h t t p: / / pow e r. sa ge r. c om PF EFFICIENCY (%) LOAD (%) LOAD (%) Mean Well HLN-80H SERIES 80 Watt LED Power Supply 80W Single Output Switching Power Supply Measures: 7.13 x 2.42 x 1.38” HLN-80H series DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). In the constant current region, the highest voltage at the output of the driver 100 depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. (B) (A) Constant Constant Voltage area Current area 60 (min.) (C) Hiccup Protection 50 100 Io (%) Typical LED power supply I-V curve DIMMING OPERATION(for B-type only) +V(Red) -V(Black) DIM+(Blue) HLN-80H DIM-(White) AC/L(Brown) AC/N(Blue) FG (Green/Yellow) ※ Built-in 3 in 1 dimming function, IP64 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. ※ Please DO NOT connect "DIM-" to "-V". ※ Reference resistance value for output current adjustment (Typical) Single driver 10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ OPEN Resistance Multiple drivers value (N=driver quantity for synchronized 10KΩ/N 20KΩ/N 30KΩ/N 40KΩ/N 50KΩ/N 60KΩ/N 70KΩ/N 80KΩ/N 90KΩ/N 100KΩ/N ----- dimming operation) Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% ※ 1 ~ 10V dimming function for output current adjustment (Typical) Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% ※ 10V PWM signal for output current adjustment (Typical): Frequency range:100Hz ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% File Name:HLN-80H-SPEC 2015-07-31 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HLN-80H-power-supply.html h t t p: / / pow e r. sa ge r. c om Vo(%) Mean Well HLN-80H SERIES 80 Watt LED Power Supply Measures: 7.13 x 2.42 x 1.38” 80W Single Output Switching Power Supply HLN-80H series ※Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to achieve 0% brightness of the lighting fixture connecting to the LED power supply unit. ※Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. Dimming connection diagram for turning the lighting fixture ON/OFF : N FG L Switch Adjuster Relay 0~100K Ohms resistance 1~10V DC Voltage 10V PWM Signal Blue DIM+ Green/ White HLN-80H DIM- Yellow AC/L Black Brown V(-) B Type Red LED Lighting Fixture AC/N V(+) Blue Using a switch and relay can turn ON/OFF the lighting fixture. 1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:HLN-80H-SPEC 2015-07-31 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HLN-80H-power-supply.html h t t p: / / pow e r. sa ge r. c om