MEAN WELL HRPG-150-5

MEAN WELL HRPG-150 SERIES 150 Watt Enclosed Power Supply 150W Single Output with PFC Function HRPG-150 series Measures: 6.26 x 3.82 x 1.50” ■€ � �     �
  � ­  � €‚ƒƒƒ„ �…  � „ �†‡  „„ � „ƒˆƒ �‚…­‰  � „  �ˆ‡„Š‹ˆŒŽ Bauart gepruft �‡ Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 SPECIFICATION MODEL HRPG-150-3.3 HRPG-150-5 HRPG-150-7.5 HRPG-150-12 HRPG-150-15 HRPG-150-24 HRPG-150-36 HRPG-150-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 30A 26A 20A 13A 10A 6.5A 4.3A 3.3A CURRENT RANGE 0 ~ 30A 0 ~ 26A 0 ~ 20A 0 ~ 13A 0 ~ 10A 0 ~ 6.5A 0 ~ 4.3A 0 ~ 3.3A RATED POWER 99W 130W 150W 156W 150W 156W 154.8W 158.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p OUTPUT VOLTAGE ADJ. RANGE 2.8 ~ 3.8V 4.3 ~ 5.8V 6.8 ~ 9V 10.2 ~ 13.8V 13.5 ~ 18V 21.6 ~ 28.8V 28.8 ~ 39.6V 40.8 ~ 55.2V VOLTAGE TOLERANCE Note.3 ±2.5% ±2.5% ±2.5% ±1.5% ±1.5% ±1.5% ±1.5% ±1.5% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.99/115VAC at full load INPUT EFFICIENCY (Typ.) 78.5% 84% 86% 87% 87% 87% 88% 88% AC CURRENT (Typ.) 1.7A/115VAC 0.9A/230VAC INRUSH CURRENT (Typ.) 35A/115VAC 70A/230VAC LEAKAGE CURRENT <1mA / 240VAC 105 ~ 135% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.96 ~ 4.62V 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down 5VSB : 5V@0.3A ; tolerance±5%, ripple : 50mVp-p(max.) 5V STANDBY FUNCTION RC+ / RC-: 4 ~ 10V or open = power on ; 0 ~ 0.8V or short = power off REMOTE CONTROL -40 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +85℃, 10 ~ 95% RH STORAGE TEMP., HUMIDITY ±℃ 0.04%/ (0 ~ 50℃) TEMP. COEFFICIENT VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A MTBF 213.4K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 159*97*38mm (L*W*H) PACKING 0.63Kg; 24pcs/16Kg/0.76CUFT †„ˆƒ‘„„’ ­’  „… ℃ „ NOTE ’“”„’•
– …‡…†’— ‡‡„‡ † ”˜™   ‘€ ˜‘‡ „‡‡… š„›•…œ…„  Œ„„ž Œ„„„‡†„„ Ÿ‘ š„„… „„›• ‡  „›• ¡›•¢ „‡£‹…€‡‡‡„‡„Ž ¤„…‡ Ÿ „ Œˆ‡„Š‡“”“¥‹ ˆ†ŒŽ¦­  File Name:HRPG-150-SPEC 2015-07-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HRPG-150-power-supply.html h t t p: / / pow e r. sa ge r. c om 6 4 2 5 3 1 ψ3.5 MEAN WELL HRPG-150 SERIES 150 Watt Enclosed Power Supply 150W Single Output with PFC Function HRPG-150 series Measures: 6.26 x 3.82 x 1.50” Mechanical Specification Case No.901I Unit:mm 152.5 1 2 3 4 5 6 7 Terminal Pin No. Assignment CN100 Pin No. Assignment Pin No. Assignment SVR1 1 AC/L 4,5 DC OUTPUT -V 2 AC/N 6,7 DC OUTPUT +V 4.5 3 FG 24 78 159 Connector Pin No. Assignment (CN100) : HRS DF11-6DP-2DSA or equivalent 6.5 150 Pin No. Assignment Mating Housing Terminal 1 -S 2 +S 10 max. 3 AUXG HRS DF11-6DS HRS DF11-**SC 4 AUX or equivalent or equivalent 6-M3(Both Sides) L=6 5 RC- 6 RC+ 22 117 fosc :100KHz(3.3~7.5V) Block Diagram 70KHz(12~48V) RECTIFIERS AUX AUX & POWER AUXG FILTER +S ACTIVE RECTIFIERS RECTIFIERS EMI +V INRUSH POWER & I/P & FILTER CURRENT SWITCHING -V PFC FILTER LIMITING -S DETECTION O.L.P. O.T.P. CIRCUIT O.T.P. FG PFC PWM O.V.P. CONTROL CONTROL RC+ REMOTE CONTROL RC- Derating Curve Output Derating VS Input Voltage 100 100 Without Cover 90 80 80 70 60 With Cover 60 40 The 5V standby must be connected 50 with a minimum load of 0.03A. 20 40 -40 -20 10 20 30 40 50 60 70 (HORIZONTAL) 85 100 125 135 155 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:HRPG-150-SPEC 2015-07-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HRPG-150-power-supply.html h t t p: / / pow e r. sa ge r. c om ψ3.5 2-M3 L=4 LOAD (%) 9 5 8.2 . 9 LOAD(%) 18.5 65 I I 18 9 3.5 3.5 28.5 84.5 7 38 97 MEAN WELL HRPG-150 SERIES 150 Watt Enclosed Power Supply 150W Single Output with PFC Function HRPG-150 series Measures: 6.26 x 3.82 x 1.50” Function Description of CN100 Pin No. Function Description Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be twisted in pair to 1 -S minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Positive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to 2 +S minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Auxiliary voltage output ground. The signal return is isolated from the output terminals (+V & -V). 3 AUXG Auxiliary voltage output, 4.75~5.25V, referenced to pin 3(AUXG). The maximum load current is 0.3A. This output is not controlled by the 4 AUX "remote ON/OFF control". 5 RC- Remote control ground. 6 RC+ Turns the output on and off by electrical or dry contact between pin 5 (RC-). Short: Power OFF, Open: Power ON. Function Manual 1.Remote Control The PSU can be turned ON/OFF by using the "Remote ON/OFF" function Between RC-(pin5) and RC+(pin6) Output Status SW ON (Short) OFF SW OFF (Open) ON CN100 RC+ AUX +S 6 2 SW 5 RC- AUXG -S 1 -V -V +V +V CN100 6 4 2 5 3 1 LOAD - + Fig 1.1 2.Remote Sense The remote sensing compensates voltage drop on the load wiring up to 0.5V. -V -V +V +V CN100 6 4 2 5 3 1 CN100 6 RC+ AUX +S 2 Sense lines should 5 RC- AUXG -S 1 LOAD be twisted in pairs -S +S (Pin1) (Pin2) - + Fig 2.1 File Name:HRPG-150-SPEC 2015-07-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HRPG-150-power-supply.html h t t p: / / pow e r. sa ge r. c om