MEAN WELL HRPG-300-5
Specifications
Manufacturer
MEAN WELL
Manufacturers Part #
HRPG-300-5
Industry Aliases
HRPG-300-5
Series
HRPG-300
Factory Pack Quantity
1
Application
General Purpose
Connection Type
Terminal
Cooling Method
Air-Cooled
Dimensions
7.83 x 4.13 x 1.61"
Efficiency
82%
Environmental Conditions
General Purpose
Industry
Industrial
Input Type
AC
Mechanical Style
Open / Enclosed Frame
Number of Outputs
1
Operating Temperature
-40 to +60°C derate linearly from 40-60°C to 50% power
Output Amps 1
60 A
Output Voltage V1 Nominal
5 V
Package Type
Enclosed with Fan
Power
300 W
Subcategory
AC-DC Power Supply
Datasheet
Extracted Text
MEAN WELL HRPG-300 SERIES 300 Watt Enclosed with Fan Power Supply 300W Single Output with PFC Function HRPG-300 series Measures: 7.83 x 4.13 x 1.61” ■€ ‧ ‧ ‧ ‧ ‧ €‚ƒƒƒ„ ‧ „ ‧…† ‡…„„ ‧ ƒˆƒ ‧ ‰ƒŠ ‧ „ƒˆƒ ‧‚‹Œ ‧ „ ‧ˆ†„Ž‘ˆ’“ ‧† Bauart gepruft Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 SPECIFICATION MODEL HRPG-300-3.3 HRPG-300-5 HRPG-300-7.5 HRPG-300-12 HRPG-300-15 HRPG-300-24 HRPG-300-36 HRPG-300-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 60A 60A 40A 27A 22A 14A 9A 7A CURRENT RANGE 0 ~ 60A 0 ~ 60A 0 ~ 40A 0 ~ 27A 0 ~ 22A 0 ~ 14A 0 ~ 9A 0 ~ 7A RATED POWER 198W 300W 300W 324W 330W 336W 324W 336W RIPPLE & NOISE (max.) Note.2 80mVp-p 90mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 250mVp-p 250mVp-p OUTPUT VOLTAGE ADJ. RANGE 2.8 ~ 3.8V 4.3 ~ 5.8V 6.8 ~ 9V 10.2 ~ 13.8V 13.5 ~ 18V 21.6 ~ 28.8V 28.8 ~ 39.6V 40.8 ~ 55.2V VOLTAGE TOLERANCE Note.3 ±2.5% ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.99/115VAC at full load INPUT EFFICIENCY (Typ.) 80% 82% 86% 88% 88% 87% 88% 89% AC CURRENT (Typ.) 3.5A/115VAC 1.8A/230VAC INRUSH CURRENT (Typ.) 35A/115VAC 70A/230VAC LEAKAGE CURRENT <1.2mA / 240VAC 105 ~ 135% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.96 ~ 4.62V 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down 5VSB : 5V@0.3A ; tolerance±5%, ripple : 50mVp-p(max.) 5V STANDBY PSU turns on : 3.3 ~ 5.6V ; PSU turns off : 0 ~ 1V DC OK SIGNAL FUNCTION REMOTE CONTROL RC+ / RC-: 4 ~ 10V or open = power on ; 0 ~ 0.8V or short = power off FAN CONTROL (Typ.) Load 35±15% or RTH2≧℃ 50 Fan on WORKING TEMP. -40 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A MTBF 176K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 199*105*41mm (L*W*H) PACKING 0.95Kg;15pcs/15.3Kg/0.69CUFT …„ˆƒ”„„• • „‹ ℃ „ NOTE •–—„•˜™ ‹†‹…•𠆆„† … —‡› ”€ ‡”† „††‹ œ„ž˜‹Ÿ‹„ ’„„¡ ’„„„†…„„ ¢” œ„„‹ „„ž˜ † „ž˜ £ž˜¤ „†¥‘‹€†††„†„“ ‰„‹† ¢ „ ’ˆ†„ކ–—–¦‘ ˆ…‡’“§ File Name:HRPG-300-SPEC 2015-07-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HRPG-300-power-supply.html h t t p: / / pow e r. sa ge r. c om 1 7 2 8 MEAN WELL HRPG-300 SERIES 300 Watt Enclosed with Fan Power Supply 300W Single Output with PFC Function HRPG-300 series Measures: 7.83 x 4.13 x 1.61” Mechanical Specification Case No.980A Unit:mm 4-M4 L=6 12.25 168.5 199 12.25 168.5 120 42.5 1 4-M4 L=5 Terminal Pin No. Assignment 2 3 Pin No. Assignment Pin No. Assignment 4 1 AC/L 4,5 DC OUTPUT -V FAN Air flow 5 2 AC/N 6,7 DC OUTPUT +V direction 3 6 FG 7 LED Connector Pin No. Assignment (CN100) : CN100 HRS DF11-8DP-2DS or equivalent SVR Pin No. Assignment Mating Housing Terminal 1 AUX 167.5 12.25 2 AUXG 3 DC-OK 167.5 12.25 4 RC- HRS DF11-8DS HRS DF11-**SC 17max. 5 GND or equivalent or equivalent 6 RC+ 7 +S 4-M4 L=6 8 -S fosc : 70KHz Block Diagram RECTIFIERS AUX AUX & POWER AUXG FILTER +S ACTIVE RECTIFIERS RECTIFIERS EMI +V INRUSH POWER & I/P & FILTER CURRENT SWITCHING -V PFC FILTER LIMITING -S DETECTION DC-OK O.L.P. O.T.P. CIRCUIT FG O.V.P. PFC PWM CONTROL CONTROL RC+ REMOTE CONTROL RC- Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 70 60 50 60 40 The 5V standby must be connected 50 with a minimum load of 0.03A. 20 40 -40 -20 10 20 30 40 50 60 70 (HORIZONTAL) 85 100 125 135 155 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:HRPG-300-SPEC 2015-07-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HRPG-300-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) 9.2 11 LOAD(%) 12.5 75 18 12.5 18 15 41 105 125 MEAN WELL HRPG-300 SERIES 300 Watt Enclosed with Fan Power Supply 300W Single Output with PFC Function HRPG-300 series Measures: 7.83 x 4.13 x 1.61” Function Description of CN100 Pin No. Function Description Auxiliary voltage output, 4.75~5.25V, reference to pin 2(AUXG). The maximum load current is 0.3A. This output is not controlled by the 1 AUX "remote ON/OFF control". Auxiliary voltage output ground. The signal return is isolated from the output terminals (+V & -V). 2 AUXG DC-OK signal is a TTL level signal, referenced to pin5(DC-OK GND). High when PSU turns on. 3 DC-OK 4 RC- Remote control ground. 5 GND This pin connects to the negative terminal(-V). Return for DC-OK signal output. 6 RC+ Turns the output on and off by electrical or dry contact between pin 4 (RC-), Short: Power OFF, Open: Power ON. Positive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to 7 +S minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be twisted in pair to 8 -S minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Function Manual 1.Remote Sense The remote sensing compensates voltage drop on the load wiring up to 0.5V. CN100 AUX DC-OK GND +S 1 7 CN100 1 2 3 4 5 6 7 2 AUXG RC- RC+ -S 8 1 7 2 8 Sense lines should -S +S LOAD (Pin7) be twisted in pairs (Pin8) - + Fig 1.1 2.DC-OK Signal DC-OK signal is a TTL level signal. High when PSU turns on. Between DC-OK(pin3) and GND(pin5) Output Status 3.3 ~ 5.6V ON 0 ~ 1V OFF CN100 1 AUX DC-OK GND +S 7 CN100 1 2 3 4 5 6 7 2 AUXG RC- RC+ -S 8 1 7 2 8 Fig 2.1 File Name:HRPG-300-SPEC 2015-07-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HRPG-300-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL HRPG-300 SERIES 300 Watt Enclosed with Fan Power Supply 300W Single Output with PFC Function HRPG-300 series Measures: 7.83 x 4.13 x 1.61” 3.Remote Control The PSU can be turned ON/OFF by using the "Remote ON/OFF" function Between RC+(pin6) and RC-(pin4) Output Status SW ON (Short) OFF SW OFF (Open) ON CN100 17 AUX DC-OK GND +S CN100 1 2 3 4 5 6 7 28 AUXG RC- RC+ -S 1 7 2 8 SW Fig 3.1 File Name:HRPG-300-SPEC 2015-07-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HRPG-300-power-supply.html h t t p: / / pow e r. sa ge r. c om
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the HRPG-300-5?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers







What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods