MEAN WELL HSG-70-36

Mean Well HSG-70 SERIES 70 Watt LED Power Supply 70W Single Output Switching Power Supply Measures: 5.00 x 3.54 1.53” HSG-70 series ■   �         �      
    �     �     ­ �  €      �‚ƒ
  
 

   � 
  „ � €… †   �€  ‡ˆ‰  
     �  † IP65 SPECIFICATION HSG-70-12 HSG-70-24 MODEL HSG-70-18 HSG-70-36 HSG-70-48 DC VOLTAGE 12V 18V 24V 36V 48V CONSTANT CURRENT REGION Note.5 7.7 ~ 12V 11.3 ~ 18V 15.5 ~ 24V 22.1 ~ 36V 29.3 ~ 48V RATED CURRENT 5.0A 4.0A 3.0A 2.0A 1.5A 72W RATED POWER 60W 72W 72W 72W Can be adjusted by internal potentiometer CURRENT ADJ. RANGE 3 ~ 5A 2.4 ~ 4A 1.8 ~ 3A 1.2 ~ 2A 0.9 ~ 1.5A OUTPUT RIPPLE & NOISE (max.) Note.2 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p VOLTAGE TOLERANCE Note.3 ±2.5% ±2.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±2.0% ±1.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME Note.7 2000ms,80ms / 115VAC 500ms,80ms / 230VAC at full load HOLD UP TIME 16ms at full load 230VAC/115VAC VOLTAGE RANGE Note.4 90 ~ 305VAC 127~431VDC FREQUENCY RANGE 47 ~ 63Hz PF≥≥ 0.96/115VAC, PF 0.96/230VAC,PF>0.92/277VAC at full load(please refer to "" Power Factor characteristic curve ) POWER FACTOR(Typ.) TOTAL HARMONIC DISTORTION THD< 20% when output loading≧≧ 65% at 115VAC/230VAC input and output loading 75% at 277VAC input INPUT EFFICIENCY(Typ.) 88% 89% 89% 90% 90% AC CURRENT 0.85A/115VAC 0.425A/230VAC 0.4A/277VAC INRUSH CURRENT(Typ.) COLD START 55A(twidth=340μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 6 units (circuit breaker of type B) / 11 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC 95 ~ 108% OVER CURRENT Note.5 Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed. 54 ~ 63V 14 ~ 17V 21 ~ 25V 28 ~ 34V 41 ~ 48V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. -40 ~ +70℃(Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 95% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes GB19510.14, GB19510.1, IP65 approved; design refer to TUV EN61347-1, EN61347-2-13, UL8750 SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25℃/ 70%RH EMC EMC EMISSION Compliance to EN55015, GB17743, GB17625.1, EN61000-3-2 Class C(≥65% load);EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV), criteria A EMC IMMUNITY MTBF 338.2Khrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 127.2*90*38.8mm (L*W*H) PACKING 0.76Kg;16pcs/ 13.2Kg/0.77CUFT Š‹   ŒŽ   
 
 ‘  … 
 

‘ ℃ € ‹ NOTE ‘‹ ’ “    
 ‘”„ €
†
 €   Š‘• †
† 
†  ‹Š “ –—   ‹ ‹ Ž   
    …    
 
 ‹ –‹ ‰  € 


  †   …  ˜      
‹ ‹         † ƒ ­ ™Š­ 
  ‹ Ž   €      ‡ˆ‰ 
 … €      š     
‹ ƒ‹ Ž  †    

      † € 
  €  †  š‹  ˆ”   † € 
€      …   š   š ˆ” ‰       ‹ —‹ ‡     
  
 ‹ Ž Œ   †   
     ‹ ›‹To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. File Name:HSG-70-SPEC 2015-11-02 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HSG-70-power-supply.html h t t p: / / pow e r. sa ge r. c om Mean Well HSG-70 SERIES 70 Watt LED Power Supply Measures: 5.00 x 3.54 1.53” 70W Single Output Switching Power Supply HSG-70 series Mechanical Specification Case No.209B Unit:mm 127.2 112.5 103.2 100 320±20 10 V+(Brown) Io ADJ. V-(Blue) 2 CCC 1.5mm×2C AC/L(Brown) T case 23 AC/N(Blue) FG (Green/Yellow) 2 H05RN-F 1.0mm×3C 9.6 ※ T case: Max. Case Temperature ※ IP65 rated. Constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) Block Diagram RECTIFIERS EMI FILTER POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER O.L.P. O.T.P. O.L.P. DETECTION FG CIRCUIT PWM & PFC CONTROL O.V.P. Derating Derating Curve Curve Static Characteristics 100 100 90 80 80 230VAC Input only 70 60 60 40 50 20 40 -40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 305 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:HSG-70-SPEC 2015-11-02 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HSG-70-power-supply.html h t t p: / / pow e r. sa ge r. c om L L LO O OA A AD ( D ( D (% % %) ) ) LOAD (%) 15 4.5 27.5 55 17.5 90 38.8 Mean Well HSG-70 SERIES 70 Watt LED Power Supply 70W Single Output Switching Power Supply HSG-70 series Measures: 5.00 x 3.54 1.53” Power Factor Characteristic Constant Current Mode 1 0.98 0.96 0.94 115VAC 0.92 230VAC 0.9 277VAC 0.88 0.86 0.84 65% 70% 80% 90% 100% (70W) LOAD EFFICIENCY vs LOAD (48V Model) HSG-70 series possess superior working efficiency that up to 90% can be reached in field applications. 94 92 90 88 86 115VAC 84 82 230VAC 80 277VAC 78 76 74 72 70 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). In the constant current region, the highest voltage at the output of the driver 100 depends on the configuration of the end systems. (B) Should there be any compatibility issues, please contact MEAN WELL. Constant (A) Constant Current area Voltage area 65 (min.) (C) Hiccup Protection 95 50 Io(%) Typical LED power supply I-V curve File Name:HSG-70-SPEC 2015-11-02 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HSG-70-power-supply.html h t t p: / / pow e r. sa ge r. c om PF EFFICIENCY (%) Vo(%)