MEAN WELL HSN-200-4.2B

GL OBAL POWER SOL UTIONS MEANWELL GL OBAL POWER SOL UTIONS HSN-200 Series 200 Watt Moving Sign Power Supply 200W Single Output Switching Power Supply HSN-200 series Measures:8.27 x 2.45 x 1.22” ■ƒ � �    �

 �  � �
 �  ­
€ �‚ SPECIFICATION HSN-200-5A MODEL HSN-200-4.2A HSN-200-4.2B HSN-200-5B DC VOLTAGE 4.2V 4.2V 5V 5V 30A 40A 30A 40A RATED CURRENT Note.2 0 ~ 40A 0 ~ 30A 0 ~ 40A CURRENT RANGE 0 ~ 30A RATED POWER(convection) 126W 168W 150W 200W 150mVp-p 150mVp-p RIPPLE & NOISE (max.) Note.3 150mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 4.5~5.5V 3.6~4.4V 3.6~4.4V 4.5~5.5V ±2.0% ±2.0% ±2.0% ±2.0% VOLTAGE TOLERANCE Note.4 ±0.5% ±0.5% ±0.5% ±0.5% LINE REGULATION ±2.0% ±2.0% ±2.0% ±2.0% LOAD REGULATION SETUP, RISE TIME 1500ms, 100ms/230VAC 2500ms, 100ms/115VAC HOLD UP TIME (Typ.) 20ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE 90~132VAC 180~264VAC or 254~373VDC 90~132VAC 180~264VAC or 254~373VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 86.5% 88% 86.5% 88% INPUT 3.0A/115VAC 2.5A/230VAC AC CURRENT (Typ.) COLD START <80A(twidth<1000μs measured at 50% Ipeak) at 115/230VAC INRUSH CURRENT (Typ.) LEAKAGE CURRENT <1mA 105~140% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT PROTECTION 4.6 ~ 5.4V 5.7 ~ 7.0V OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER TEMPERATURE Shut down O/P voltage, recovers automatically after temperature goes down -25 ~ +70℃(Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +85℃, 10 ~ 95% RH STORAGE TEMP., HUMIDITY ±0.03%/℃ (0 ~ 60℃) TEMP. COEFFICIENT 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS UL60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3.0KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25℃/ 70%RH EMC EMC EMISSION Refer to EN55022 (CISPR22) Class A (Note 5) Refer to EN61000-4-5; 4KV, criteria A EMC IMMUNITY MTBF 283.069K hrs min. MIL-HDBK-217F (25℃) OTHERS 210*62*31mm (L*W*H) DIMENSION 0.55kg; 20pcs/12kg/1.63CUFT PACKING „…†‚ ‡‚ˆ ℃ 
„ ‚„ ‰Š„ NOTE „‹Œ ‚ Ž‘’

‚Š€ „Œ“” „ “„† „ ˆ„
„ „ •„†
–„†–
€ Ž „ File Name:HSN-200-SPEC 2014-09-13 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 sales@powergatellc.com http://www.powergatellc.com/mean-well-hsn-200-power-supply.html ww w. po w ergatellc . c o m GL OBAL POWER SOL UTIONS MEANWELL GL OBAL POWER SOL UTIONS HSN-200 Series 200 Watt Moving Sign Power Supply 200W Single Output Switching Power Supply HSN-200 series Measures:8.27 x 2.45 x 1.22” Mechanical Specification CASE NO.:232A Unit:mm 210 2 206 13 SVR1 LED1 TB1 3 1 2 2 1 4-ψ3.3 AC Input Terminal(TB1) pin NO. Assignment DC Output Terminal pin NO. Assignment Pin No. Assignment Terminal Pin No. Assignment Terminal 1 AC/L 1 -V CPB-7 M5 2 AC/N DG28C-B-03P-13-00AH 2 +V 3 FG Block Diagram POWER SYNCHRONOUS +V EMI BRIDGE I/P SWITCH- RECTIFIERS FILTER RECTIFIERS -V ING & FILTER O.T.P. FG DETECTION PWM O.L.P. CIRCUIT CONVERTER O.V.P. Derating Curve Static Characteristics fosc=90Khz Mount with a 40 450*450*3mm 100 heatsink 180~264VAC 80 30 60 90~132VAC 20 40 20 10 -25 -10 0 10 30 40 50 60 70 (HORIZONTAL) 90 95 100 110 120 125 132 180 190 200 220 230 240 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:HSN-200-SPEC 2014-09-13 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 sales@powergatellc.com http://www.powergatellc.com/mean-well-hsn-200-power-supply.html ww w. po w ergatellc . c o m LOAD (%) 62 46.4 7.8 Io(A) 31 K 450 GL OBAL POWER SOL UTIONS MEANWELL GL OBAL POWER SOL UTIONS HSN-200 Series 200 Watt Moving Sign Power Supply 200W Single Output Switching Power Supply HSN-200 series Measures:8.27 x 2.45 x 1.22” Installation 1.Operate with additional aluminum plate In order to meet the“Derating Curve”and the “Static Characteristics” ,HSN-200 series must be installed onto an aluminum plate(or the cabinet of the same size) on the bottom.The size of the suggested aluminum plate is shown as below. And for optimizing thermal performance, the aluminum plate must have an even and smooth surface (or coated with thermal grease), and HSN-200 series must be firmly mounted at the center of the aluminum plate. M3*4 2.For heat dissipation, at least 5cm installation distance around the PSU should be kept, shown as below: 13 SVR1 5cm 5cm File Name:HSN-200-SPEC 2014-09-13 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 sales@powergatellc.com http://www.powergatellc.com/mean-well-hsn-200-power-supply.html ww w. po w ergatellc . c o m 450   3  K