MEAN WELL HVG-65-52D

Mean Well HVG-65 SERIES 65 Watt LED Power Supply 65W Single Output Switching Power Supply HVG-65 series Measures: 7.44 x 4.42 x 1.45”” ■ �   œŽœ �–  …  �“ …… Š›¢ � ˜Ÿ  Ÿ   Ÿ  � Š…  �      �
Ÿ …    �Ž  �„   …  ‚ ­  ƒ �˜…‰‡€       � …Š  …   �˜…ŠŸŸ  �Š Š‚ˆ›ƒ IP65 IP67 “—––Ž               
      ­   €‚ ƒ
„ …  † ­‡ˆ ‡‰‰… SPECIFICATION MODEL HVG-65-12 HVG-65-15 HVG-65-20 HVG-65-24 HVG-65-30 HVG-65-36 HVG-65-42 HVG-65-48 HVG-65-54 DC VOLTAGE 12V 15V 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.4 7.2 ~12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V RATED CURRENT 5A 4.3A 3.25A 2.71A 2.17A 1.81A 1.55A 1.36A 1.21A RATED POWER 60W 64.5W 65W 65W 65.1W 65.2W 65.1W 65.3W 65.3W 200mVp-p 300mVp-p RIPPLE & NOISE (max.) Note.2 120mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 300mVp-p 300mVp-p VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 38 ~ 46V 43 ~ 53V 49 ~ 58V Can be adjusted by internal potentiometer A type only OUTPUT CURRENT ADJ. RANGE 3 ~ 5A 2.58 ~ 4.3A 1.95 ~ 3.25A 1.62 ~ 2.71A 1.3 ~ 2.17A 1.08 ~ 1.81A 0.93 ~ 1.55A 0.81 ~ 1.36A 0.72 ~ 1.21A ±1.0% ±1.0% VOLTAGE TOLERANCE Note.3 ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.5% ±1.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% 500ms, 80ms / 230VAC 400ms, 80ms / 347VAC / 480VAC at full load SETUP, RISE TIME B type 500ms, 80ms / 230VAC 500ms, 80ms / 347VAC / 480VAC at 95% load HOLD UP TIME (Typ.) 16ms / 347VAC 30ms / 480VAC at full load VOLTAGE RANGE Note.5 180 ~ 528VAC 254VDC ~ 747VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF≧≧≧≧ 0.98/230VAC, PF 0.97/277VAC, PF 0.97/347VAC, PF 0.93/480VAC at full load (Please refer to "Power Factor Characteristic"curve) Total harmonic distortion will be lower than 20% when output loading is 60% or higher at 230VAC / 277VAC / 347VAC TOTAL HARMONIC DISTORTION INPUT Total harmonic distortion will be lower than 20% when output loading is 75% or higher at 480VAC EFFICIENCY (Typ.) 86.5% 87.5% 88.5% 89% 89% 89.5% 89.5% 90% 90% AC CURRENT (Typ.) 0.22A / 347VAC 0.18A / 480VAC INRUSH CURRENT (Typ.) COLD START 25A(twidth=420 s measured at 50% I μ peak) at 480VAC LEAKAGE CURRENT <0.75mA / 480VAC 95 ~ 108% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT PROTECTION 28 ~ 34V 41 ~ 46V 54 ~ 60V 59 ~ 65V 14.4 ~ 16.8V 18 ~ 21V 23 ~ 27V 34 ~ 38V 47 ~ 53V OVER VOLTAGE Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE -40 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 60℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.7 UL8750, CSA C22.2 No. 250.0-13, IP65 or IP67 approved I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (≧60% load ) ; EN61000-3-3, FCC part 15 class B Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A EMC IMMUNITY MTBF 208K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 189*61.5*36.8mm (L*W*H) 0.77Kg; 18pcs/14.9Kg/0.89CUFT PACKING ˆ„Š  ‹Œ
 † Ž ℃ …  NOTE Ž‘’ Ž­“”… Š Ž• –  …’Œ
…  ‹„   †       Œ…•€‘ˆ—­‡„“€˜‰‡€­€™‰‡• € Š     š… „Š Š
˜…Š ‡­ …‡ˆ›œ–†ˆ˜Ž‹‹†—
 œ„Š      …  ž „… ž – … ‡­    …‡­†…•‡­ …  • ‚  ŸŸ ƒ ›‘… Š  „……ž …‡  …  …¡†‰‡€Š  Š    Š    Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HVG-65-power-supply.html h t t p: / / pow e r. sa ge r. c om Mean Well HVG-65 SERIES 65 Watt LED Power Supply 65W Single Output Switching Power Supply HVG-65 series Measures: 7.44 x 4.42 x 1.45”” Mechanical Specification Case No.957 Unit:mm A Type:(HVG-65-_A) 189 12 165 9.6 300±20 300±20 FG (Green/Yellow) T case -V(Black) 82.5 AC/L(Brown) +V(Red) AC/N(Blue) STW 18AWG×3C SVT 18AWG×2C Io Vo ADJ. ADJ. ψ× 4.2 4PL ※ T case: Max. Case Temperature. ※ IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) B Type:(HVG-65-_B) 189 12 165 9.6 300±20 300±20 SVT 18AWG×2C -V(Black) FG (Green/Yellow) T case 82.5 +V(Red) AC/L(Brown) UL2517 18AWG×2C STW 18AWG×3C AC/N(Blue) DIM+(Blue) DIM-(White) ψ× 4.2 4PL ※ T case: Max. Case Temperature. D Type(option):(HVG-65-_D) 189 12 165 9.6 300±20 300±20 FG (Green/Yellow) T case 82.5 -V(Black) AC/L(Brown) +V(Red) AC/N(Blue) STW 18AWG×3C SVT 18AWG×2C ψ× 4.2 4PL ※ T case: Max. Case Temperature. ※ IP67 rated. Timer dimming function, contact MEAN WELL for details. File Name:HVG-65-SPEC 2014-05-30 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HVG-65-power-supply.html h t t p: / / pow e r. sa ge r. c om 9.4 34.2 9.4 9.4 34.2 9.4 9.4 34.2 9.4 68 61.5 61.5 30.75 30.75 30.75 38.8 36.8 36.8 Mean Well HVG-65 SERIES 65 Watt LED Power Supply 65W Single Output Switching Power Supply HVG-65 series Measures: 7.44 x 4.42 x 1.45”” Block Diagram PFC fosc : 65KHz PWM fosc : 65KHz RECTIFIERS EMI FILTER POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER DIM+ O.L.P. DIM- (B Type) DETECTION FG O.L.P. PWM & PFC CIRCUIT PFC CONTROL CONTROL O.V.P. O.T.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 -40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) 180 347 440 480 528 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz Power Factor Characteristic Constant Current Mode 1.00 0.98 0.96 0.94 0.92 480V 0.90 347V 0.88 277V 0.86 230V 0.84 0.82 0.80 0.78 60% 70% 80% 90% 100% (65W) LOAD File Name:HVG-65-SPEC 2014-05-30 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HVG-65-power-supply.html h t t p: / / pow e r. sa ge r. c om PF LOAD (%) LOAD (%) Mean Well HVG-65 SERIES 65 Watt LED Power Supply 65W Single Output Switching Power Supply HVG-65 series Measures: 7.44 x 4.42 x 1.45”” EFFICIENCY vs LOAD (48V Model) HVG-65 series possess superior working efficiency that up to 90% can be reached in field applications. 100 95 90 85 480V 80 347V 277V 75 230V 70 65 60 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). In the constant current region, the highest voltage at the output of the driver 100 depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. (A) Constant (B) Voltage area Constant Current region 50 100 Io (%) Typical LED power supply I-V curve File Name:HVG-65-SPEC 2014-05-30 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HVG-65-power-supply.html h t t p: / / pow e r. sa ge r. c om EFFICIENCY (%) Vo(%) Mean Well HVG-65 SERIES 65 Watt LED Power Supply 65W Single Output Switching Power Supply HVG-65 se rie s Measures: 7.44 x 4.42 x 1.45”” DIMMING OPERATION (for B-type only) -V(Black) FG (Green/Yellow) +V(Red) AC/L(Brown) HVG-65 AC/N(Blue) DIM+(Blue) DIM-(White) ※ Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 0 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. ※ Please DO NOT connect "DIM-" to "-V". ※ Reference resistance value for output current adjustment (Typical) Single driver Short 10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ OPEN Resistance Multiple drivers value (N=driver quantity for synchronized Short 10KΩ/N 20KΩ/N 30KΩ/N 40KΩ/N 50KΩ/N 60KΩ/N 70KΩ/N 80KΩ/N 90KΩ/N 100KΩ/N ----- dimming operation) Percentage of rated current 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% ※ 0 ~ 10V dimming function for output current adjustment (Typical) Dimming value 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% ※ 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz Duty value 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% WATERPROOF CONNECTION ◎ Waterproof connector Waterproof connector can be assembled on the output cable of HVG-65 to operate in dry/wet/damp or outdoor environment. AC HVG-65 source I/P O/P Size Pin Configuration (Female) Size Pin Configuration (Female) M12 M15 4-PIN 5-PIN 2-PIN 5A/PIN 5A/PIN 12A/PIN Order No. M12-04 M12-05 Order No. M15-02 LED Lamp Suitable Current 10A max. 10A max. Suitable Current 12A max. File Name:HVG-65-SPEC 2014-05-30 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HVG-65-power-supply.html h t t p: / / pow e r. sa ge r. c om Mean Well HVG-65 SERIES 65 Watt LED Power Supply 65W Single Output Switching Power Supply HVG-65 series Measures: 7.44 x 4.42 x 1.45”” ◎ Cable Joiner CJ04-1 suitable for 14AWG~16AWG 66 CJ04-2 suitable for 18AWG~22AWG 26 20 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HVG-65 O/P Wires ※CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. File Name:HVG-65-SPEC 2014-05-30 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-HVG-65-power-supply.html h t t p: / / pow e r. sa ge r. c om ψ25