MEAN WELL IPC-300A
Specifications
Manufacturer
MEAN WELL
Manufacturers Part #
IPC-300A
Industry Aliases
IPC-300A
Series
IPC-300
Factory Pack Quantity
1
Cooling Method
Air-Cooled
Dimensions
10.24 x 3.27 x 1.57"
Efficiency
75%
Industry
Industrial
Isolation
2000 VAC
Mechanical Style
Open / Enclosed Frame
Mounting
Rack
Number of Outputs
4
Operating Temperature
- 10 to + 60°C
Output Amps 1
20 A
Output Amps 2
30 A
Output Amps 3
18 A
Output Amps 4
0.5 A
Output Voltage V1 Nominal
3.3 VDC
Output Voltage V2 Nominal
5 VDC
Output Voltage V3 Nominal
12 VDC
Output Voltage V4 Nominal
- 5 VDC
Power
300 W
Subcategory
AC-DC Power Supply
Datasheet
Extracted Text
300W Industrial 1U ATX 12V/P4 PC Power Supply IPC-300A ■�8��������= ‧#�����@����3������������� ‧@��1���������������>�8�������(� ‧����1����&����������≧A+. ‧2����������=B’������������>��1�������>��1���1����(� ‧8����������������(� �� ����*���0����� ‧C��’���&���(���������������(���������� ‧D����*������������*�88�������� ‧!������0��������E�������E���� ‧C��’�E��BD=��F��������/� ‧���.����������� ���*������� ‧$�(’����������� ‧��������&������� SPECIFICATION MODEL IPC-300A OUTPUT NUMBER CH1 CH2 CH3 CH4 CH5 STANDBY DC VOLTAGE 3.3V 5V 12V -5V -12V 5VSB RATED CURRENT 20A 30A 18A 0.5A 1A 2A CURRENT RANGE 0 ~ 20A 1 ~ 30A 1 ~ 18A 0 ~ 0.5A 0.1 ~ 1A 0 ~ 2A 300W continue. +5V,+3.3V,+12V combine total power output shall not exceed 270W.(The +5 & +3.3Volt combine total output shall not exceed 150W) RATED POWER (The -5 & -12Volt combine total output shall not exceed 12W) OUTPUT RIPPLE & NOISE (max.) Note.2 50mVp-p 50mVp-p 120mVp-p 100mVp-p 120mVp-p 50mVp-p VOLTAGE ADJ. RANGE CH2 : 5.05 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±5.0% ±5.0% ±7.0% ±8.0% ±10% ±5.0% LINE REGULATION ±1.0% ±1.0% ±1.0% ±2.0% ±2.0% ±1.0% LOAD REGULATION ±5.0% ±5.0% ±7.0% ±8.0% ±10% ±5.0% SETUP, RISE TIME 800ms, 20ms/230VAC 2500ms, 20ms/115VAC at full load HOLD TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 75% INPUT AC CURRENT (Typ.) 4.6A/115VAC 2.3A/230VAC INRUSH CURRENT (Typ.) 40A/115VAC 80A/230VAC LEAKAGE CURRENT(max.) 3mA/240VAC 105 ~ 150% rated output power OVER LOAD Protection type : Shut down o/p voltage, re-power on to recover +3.3V, +5V: 110% ~ 140% of rated voltage ; +12V:13.2V ~ 16V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover All output equipped with short circuit SHORT CIRCUIT Protection type : Shut down o/p voltage, re-power on to recover POWER GOOD SIGNAL The TTL compatible signal out with 100ms to 500ms delay after power set up FUNCTION POWER FAIL SIGNAL The TTL compatible signal will go down at least 1ms before +5V below 4.75V Power off: PS-ON = "Hi" or ">2V" ; Power on: PS-ON = "Low" or "<0.5V" PS-ON INPUT SIGNAL WORKING TEMP. -10 ~ +60℃ (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃ 10 ~ 95% RH non-condensing TEMP. COEFFICIENT ±℃ 0.05% / (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:2KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:50M Ohms / 500VDC / 25℃/ 70% RH (Note 5) EMC EMISSION Compliance to EN55032 (CISPR32) Class B, Design refer to FCC part 15 Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4, 5,6,8,11, light industry level, criteria A EMC IMMUNITY MTBF 94.1K hrs min. MIL-HDBK-217F (25℃) ATX main power connector * 1ea; +12V power connector * 1ea CONNECTOR Peripheral power connector * 3ea; Floppy drive power connector * 1ea OTHERS COOLING Forced air ventilation by 4cm DC fan 260*83*40mm (L*W*H) DIMENSION 1.46Kg; 10pcs/15.6Kg/0.89CUFT PACKING NOTE �����������������������������������������������������������������������������������������℃������ ����������������� ���!������"�������������������������#$%���� ���&���’� ������(�����)��&����������*&���������������&��’���������"�+,���������������������� ���-������(���������������������������.�������.���/��-����� +��0������(����� �����������������&�������1����(����2�������’��3��’���������(����1������������������� ����’����&������������������������������������&’��’�&���� ��������������������������4��������������’��5#������������ �����/������� ���������(��’����������� �����7���6�7����������������&��’���������’��3�������’���������4������������� ����*�����������’������������������5#���������1����8���(�����������’�&���� �������������’����5#�������������������������95#:�������(����������������&������������;�<����1���� ������’���=>>&&&�����&�������? 7���’���� ������������������������(�������℃℃ >������&��’������������������������ >������&��’������������������������(����������’�(’����’��������<7�����?� File Name: IPC-300A-SPEC 2018-01-04 300W Industrial 1U ATX 12V/P4 PC Power Supply IPC-300A Mechanical Specification Case No. IPC-250 Unit:mm 40 19.5 SVR Air flow direction Air flow direction M3 4 2-M3 260 240 PIN1 PIN11 +3.3V(ORANGE) +3.3V(ORANGE) +3.3V(ORANGE) -12V(BLUE) GND(BLACK) GND(BLACK) +5V(RED) PS-ON(GREEN) GND(BLACK) GND(BLACK) (A) (WIRE OUTPUT OF PCB, 18AWG) +5V(RED) GND(BLACK) GND(BLACK) GND(BLACK) PG(GRAY) -5V(WHITE) +5VSB(PURPLE) +5V(RED) +12V(YELLOW) +5V(RED) PIN10 PIN20 L=450mm±10mm 4 +5VDC(RED) 3 GND(BLACK) ( B ) GND(BLACK) 2 +12V(YELLOW) 1 L=150mm L=450mm±10mm +5VDC(RED) 4 GND(BLACK) 3 ( B ) (A)MOLEX 39-01-2200 or equivalent GND(BLACK) 2 +12V(YELLOW) 1 L=150mm (B)MOLEX 8981-04P or equivalent 4 +5VDC(RED) 3 GND(BLACK) ( B ) GND(BLACK) 2 (C)AMP 171822-4 or equivalent +12V(YELLOW) 1 L=150mm +5VDC(RED) 1 (D)MOLEX 39-01-2040 or equivalent GND(BLACK) 2 ( C ) 3 GND(BLACK) 4 +12V(YELLOW) +12V(YELLOW) GND(BLACK) 1 3 ( D ) 2 4 +12V(YELLOW) GND(BLACK) L=440mm±10mm File Name: IPC-300A-SPEC 2018-01-04 83 72.7 4.75 7 300W Industrial 1U ATX 12V/P4 PC Power Supply IPC-300A Block Diagram fosc : 100KHz +5VSB DETERCTION CIRCUIT RECTIFIERS POWER SWITCHING +5VSB & PWM CONTROL FILTER RECTIFIERS MA & & +3.3V CONTROL FILTER ACTIVE RECTIFIERS POWER RECTIFIERS +5V,+12V,-5V,-12V EMI INRUSH I/P & SWITCH- & FILTER CURRENT COM FILTER P.F.C. ING LIMITING P.G. DETECTION PG CIRCUIT FG PWM DETECTION & O.L.P. CONTROL O.V.P. CIRCUIT PS/ON PS/ON CONTROL Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 60 70 60 40 50 20 40 -10 0102030405060 70(HORIZONTAL) 90 100 115 135 155 230 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name: IPC-300A-SPEC 2018-01-04 LOAD (%) LOAD(%) 300W Industrial 1U ATX 12V/P4 PC Power Supply IPC-300B ■�8��������= ‧#�����@����3������������� ‧@��1���������������>�8�������(� ‧����1����&����������≧A+. ‧2����������=�B’������������>��1�������>��1���1����(� ‧8����������������(� �� ����*���0����� ‧C��’���&���(���������������(���������� ‧D����*������������*�88�������� ‧!������0��������E�������E�+� ‧�+�>����������������3�,������������<��/�? ‧C��’�E��BD=��F��������/� ‧���.����������� ���*������� ‧$�(’����������� ‧��������&������� SPECIFICATION MODEL IPC-300 OUTPUT NUMBER CH1 CH2 CH3 CH4 CH5 STANDBY DC VOLTAGE 24V 5V 12V -5V -12V 5VSB RATED CURRENT 3A 30A 18A 0.5A 1A 2A CURRENT RANGE 0 ~ 7A 1 ~ 30A 1 ~ 18A 0 ~ 0.5A 0.1 ~ 1A 0 ~ 2A 300W continue. +24V,+5V,+12V combine total power output shall not exceed 270W.(The +24 & +5Volt combine total output shall not exceed 150W) RATED POWER (The -5 & -12Volt combine total output shall not exceed 12W) OUTPUT RIPPLE & NOISE (max.) Note.2 240mVp-p 50mVp-p 120mVp-p 100mVp-p 120mVp-p 50mVp-p VOLTAGE ADJ. RANGE CH2 : 5.05 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±5.0% ±5.0% ±7.0% ±8.0% ±10% ±5.0% LINE REGULATION ±1.0% ±1.0% ±1.0% ±2.0% ±2.0% ±1.0% LOAD REGULATION ±5.0% ±5.0% ±7.0% ±8.0% ±10% ±5.0% SETUP, RISE TIME 800ms, 20ms/230VAC 2500ms, 20ms/115VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 80% INPUT AC CURRENT (Typ.) 4.6A/115VAC 2.3A/230VAC INRUSH CURRENT (Typ.) 40A/115VAC 80A/230VAC LEAKAGE CURRENT(max.) 3mA/240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Shut down o/p voltage, re-power on to recover +24V, +5V: 110% ~ 140% of rated voltage ; +12V:13.2V ~ 16V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover All output equipped with short circuit SHORT CIRCUIT Protection type : Shut down o/p voltage, re-power on to recover POWER GOOD SIGNAL The TTL compatible signal out with 100ms to 500ms delay after power set up FUNCTION POWER FAIL SIGNAL The TTL compatible signal will go down at least 1ms before +5V below 4.75V Power off: PS-ON = "Hi" or ">2V" ; Power on: PS-ON = "Low" or "<0.5V" PS-ON INPUT SIGNAL WORKING TEMP. -10 ~ +60℃ (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃ 10 ~ 95% RH non-condensing TEMP. COEFFICIENT ±℃ 0.05% / (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:2KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:50M Ohms / 500VDC / 25℃/ 70% RH EMC (Note 5) EMC EMISSION Compliance to EN55032 (CISPR32) Class B, Design refer to FCC part 15 Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4, 5,6,8,11, light industry level, criteria A EMC IMMUNITY MTBF 94.1K hrs min. MIL-HDBK-217F (25℃) ATX main power connector * 1ea; +12V power connector * 1ea CONNECTOR Peripheral power connector * 3 ea; Floppy drive power connector * 1 ea OTHERS COOLING Forced air ventilation by 4cm DC fan 260*83*40mm (L*W*H) DIMENSION 1.46Kg; 10pcs/15.6Kg/0.89CUFT PACKING NOTE �����������������������������������������������������������������������������������������℃������ ����������������� ���!������"�������������������������#$%���� ���&���’� ������(�����)��&����������*&���������������&��’���������"�+,���������������������� ���-������(���������������������������.�������.���/��-����� +��0������(����� �����������������&�������1����(����2�������’��3��’���������(����1������������������� ����’����&������������������������������������&’��’�&���� ��������������������������4��������������’��5#������������ �����/������� ���������(��’����������� �����7���6�7����������������&��’���������’��3�������’���������4������������� ����*�����������’������������������5#���������1����8���(�����������’�&���� �������������’����5#�������������������������95#:�������(����������������&������������;�<����1���� ������’���=>>&&&�����&�������? 7���’���� ������������������������(�������℃℃ >������&��’������������������������ >������&��’������������������������(����������’�(’����’��������<7�����?� File Name: IPC-300B-SPEC 2018-01-04 300W Industrial 1U ATX 12V/P4 PC Power Supply IPC-300B Mechanical Specification Case No. IPC-250 Unit:mm 40 19.5 SVR Air flow direction Air flow direction M3 4 2-M3 260 240 PIN1 PIN11 +24V(ORANGE) +24V(ORANGE) +24V(ORANGE) -12V(BLUE) GND(BLACK) GND(BLACK) +5V(RED) PS-ON(GREEN) GND(BLACK) GND(BLACK) (A) (WIRE OUTPUT OF PCB, 18AWG) +5V(RED) GND(BLACK) GND(BLACK) GND(BLACK) PG(GRAY) -5V(WHITE) +5VSB(PURPLE) +5V(RED) +12V(YELLOW) +5V(RED) PIN10 PIN20 L=450mm±10mm 4 +5VDC(RED) 3 GND(BLACK) ( B ) GND(BLACK) 2 +12V(YELLOW) 1 L=150mm L=450mm±10mm +5VDC(RED) 4 GND(BLACK) 3 ( B ) (A)MOLEX 39-01-2200 or equivalent GND(BLACK) 2 +12V(YELLOW) 1 L=150mm (B)MOLEX 8981-04P or equivalent 4 +5VDC(RED) 3 GND(BLACK) ( B ) GND(BLACK) 2 (C)AMP 171822-4 or equivalent +12V(YELLOW) 1 L=150mm +5VDC(RED) 1 (D)MOLEX 39-01-2040 or equivalent GND(BLACK) 2 ( C ) 3 GND(BLACK) 4 +12V(YELLOW) +12V(YELLOW) GND(BLACK) 1 3 ( D ) 2 4 +12V(YELLOW) GND(BLACK) L=440mm±10mm File Name: IPC-300B-SPEC 2018-01-04 83 72.7 4.75 7 300W Industrial 1U ATX 12V/P4 PC Power Supply IPC-300B Block Diagram fosc : 100KHz +5VSB DETERCTION CIRCUIT RECTIFIERS POWER SWITCHING +5VSB & PWM CONTROL FILTER RECTIFIERS MA & & +24V CONTROL FILTER ACTIVE RECTIFIERS POWER RECTIFIERS +5V,+12V,-5V,-12V EMI INRUSH I/P & SWITCH- & FILTER CURRENT COM FILTER P.F.C. ING LIMITING P.G. DETECTION PG CIRCUIT FG PWM DETECTION & O.L.P. CONTROL O.V.P. CIRCUIT PS/ON PS/ON CONTROL Derating Curve Output Derating VS Input Voltage 100 100 90 80 80 60 70 60 40 50 20 40 -10 0102030405060 70(HORIZONTAL) 90 100 115 135 155 230 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name: IPC-300B-SPEC 2018-01-04 LOAD (%) LOAD(%)
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the IPC-300A?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods