Name: MEAN WELL LCM-40DA
Brand: MEAN WELL
SKU: LCM-40DA

Description

40 W, SINGLE OUTPUT, 2-100 V@0.5 A LED LIGHTING PLASTIC AC-DC POWER SUPPLY

Part Number

LCM-40DA

Price

Request Quote

Manufacturer

MEAN WELL

Lead Time

Request Quote

Category

Circuit Protection » AC-DC Power Supply

Specifications

Manufacturer

MEAN WELL

Manufacturers Part #

LCM-40DA

Industry Aliases

LCM-40DA

Series

LCM-40DA-DRIVER

Factory Pack Quantity

Adjust Type

Current

Application

LED Power Supply

Compliance

General Safety

Cooling Method

Convection

Dimensions

4.86 x 3.21 x 0.91"

Dimming Capability

Yes

Driving Method

Constant Current

Efficiency

92%

Environmental Conditions

General Purpose

Industry

LED Lighting

Input Type

180-295 VAC

Mechanical Style

LED Power Supply

Number of Outputs

Operating Temperature

-30 to +60°C (see derating curve)

Output Amps 1

0.5 A

Output Voltage V1 Nominal

2-100 V

Package Type

Plastic

Power

40 W

Subcategory

AC-DC Power Supply

Datasheet

LCM-40DA-SPEC.pdf

172 KiB

Download

Extracted Text

40W Multiple-Stage Constant Current Mode LED Driver LCM-40DA series IS 15885(Part 2/Sec13) �� THOMAS SAMUELTHOMAS SAMUEL �� R-41027766 ■ �� ■ �� ‧��!��"��"� ‧��"��!�� "��"��"��#"��#$��! ‧�� "��!�� ‧�9"��!��!��"��%%�� ‧��!��"�"��!�� ‧:��"��9;�� ‧��"�"��!�� ‧��#$��<�+.� ‧;��=��%�� >"��!��"�� "��#"�?3��!��3 ��$��!��7��,�� ‧(�$��$� ■ �� !��"��"��"��"��"��#"��#$��!��!��%�� !��!��"�� %��&’()&�’�*+�� ,)�～’-./�� "��"��#��(.��,�.��+�0!��1��!��!��!�� $��-,23��! �!�� "��3��!��#"�� (�℃℃ 45-� �� +�%��3��6��!��!�� $��!��7��!��"�� "�8�#�"��$� ��"��!��$��+ ■ �� ;�� :��"��%�� 0$�� ;�� @�� :"��1 ��%��!��3��!��#$��<�+.� %��1 AUX ��%��!��3��!��#$��<,+’��8�"��$�� :$��6�� File Name:LCM-40DA-SPEC 2018-05-02 40W Multiple-Stage Constant Current Mode LED Driver LCM-40DA series SPECIFICATION MODEL LCM-40DA- Current level selectable via DIP switch, please refer to”DIP SWITCH TABLE” section CURRENT LEVEL 350mA 500mA 600mA 700mA(default) 900mA 1050mA RATED POWER 42W DC VOLTAGE RANGE 2 ~ 100V 2 ~ 80V 2 ~ 67V 2 ~ 57V 2 ~ 45V 2 ~ 40V OUTPUT OPEN CIRCUIT VOLTAGE (max.) 110V 65V CURRENT RIPPLE Note.5 5.0% max. @rated current CURRENT TOLERANCE ±5% AUXILIARY DC OUTPUT Nominal 12V(deviation 11.4~12.6V)@50mA for AUX-Type only SETUP TIME Note.3 500ms / 230VAC 180 ~ 295VAC 254 ~ 417VDC VOLTAGE RANGE Note.2 (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE 47 ~ 63Hz PF≧≧ 0.975/230VAC, PF 0.96/277VAC@full load POWER FACTOR (Typ.) (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) THD< 20%(@load≧75%) TOTAL HARMONIC DISTORTION (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section) EFFICIENCY (Typ.) Note.4 91% INPUT AC CURRENT (Typ.) 0.23A/230VAC 0.2A/277VAC INRUSH CURRENT (Typ.) COLD START 20A(twidth=260μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 MAX. No. of PSUs on 16A 26 units (circuit breaker of type B) / 44 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.5mA / 240VAC STANDBY POWER <0.5W for Blank-Type, <1.2W for AUX-Type CONSUMPTION Note.6 SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed 110 ~ 130V OVER VOLTAGE PROTECTION Shutdown o/p voltage, re-power on to recover OVER TEMPERATURE Shutdown o/p voltage,re-power on to recover DIMMING Please refer to "DIMMING OPERATION" section Please refer to "SYNCHRONIZATION OPERATION” section FUNCTION SYNCHRONIZATION By external NTC, please refer to “TEMPERATURE COMPENSATION OPERATION”section TEMP. COMPENSATION WORKING TEMP. Tcase=-30 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) MAX. CASE TEMP. Tcase=+90℃ WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃℃ (0 ~ 50 ) TEMP. COEFFICIENT 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION UL8750, CSA C22.2 No.250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent, GB19510.14,GB19510.1, SAFETY STANDARDS BIS IS15885, EAC TP TC 004 approved DALI STANDARDS Comply with IEC62386-101, 102, 207 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH EMC EMISSION Note.7 Compliance to EN55015, EN61000-3-2 Class C(@load≧40%) ; EN61000-3-3; GB17625.1,GB17743, EAC TP TC 020 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level() surge immunity Line-Line 2KV , EAC TP TC 020 MTBF 193.6K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 123.5*81.5*23mm (L*W*H) PACKING 0.24Kg ; 54pcs/15Kg/1.12CUFT ,+��""��@�0��""$��’(�/��3��’.℃�� #��+ NOTE ’+��$�#��"��"��+�9"�� A�0�0%��B�C��0�C%�0%�D�� "�+ (+��!�� "��+�0��@��;;��!��$�"�� !��+ �+�� $��.��)�/��#$��%9��!+ .+��"��.�24,��2�� 8��"��"��$+ &+��#$��,)�~’(�/��+ *+�0!��!��""�#��#��!� ��"��6��+�� ""�#�� #$��!�� "��""��3��!�� "��6�� 6��"� $��!��"��""��+ )+�0!��#�� (+.℃℃ �,��!� ��"��"�� . �,��!� ��"�� "��!��!��!��’��>&.�� ?+ File Name:LCM-40DA-SPEC 2018-05-02 40W Multiple-Stage Constant Current Mode LED Driver LCM-40DA series BLOCK DIAGRAM PFC fosc : 60KHz PWM fosc : 80KHz +12Vaux RECTIFIERS (optional) RECTIFIERS EMI FILTER POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER DA+ CURRENT MCU DA- LIMIT O.L.P. DETECTION PFC PWM CIRCUIT CONTROL CONTROL O.T.P. O.V.P. DIP SWITCH TABLE LCM-40DA is a multiple-stage constant current driver, selection of output current through DIP switch is exhibited below. DIP S.W. 1 2 3 4 5 6 Io 350mA ---- ---- ---- ---- ---- ---- 500mA ON ---- ---- ---- ---- ---- 600mA ON ON ---- ---- ---- ---- 700mA(factory default) ON ON ON ---- ---- ON 900mA ON ON ON ON ---- ON 1050mA ON ON ON ON ON ON File Name:LCM-40DA-SPEC 2018-05-02 40W Multiple-Stage Constant Current Mode LED Driver LCM-40DA series DIMMING OPERATION DA- LCM-40DA DA+ Push Button PUSH AC/N AC/N AC/L AC/L ※PUSH dimming(primary side) Action Action duration Function Short push 0.1~1 sec. Turn ON-OFF the driver Long push 1.5~10 sec. Every Long Push changes the dimming direction, dimming up or down Reset >11 sec. Set up the dimming level to 100% ‧The factory default dimming level is at 100%. ‧If the push action lasts less than 0.05 sec., it will not lead to a change for the status of the driver. ‧Up to 10 drivers can perform the PUSH dimming at the same time when utilizing one common push button. ‧The maximum length of the cable from the push button to the last driver is 20 meters. ‧The additive push button can be connected only between the PUSH terminal, as displayed in the diagram, and AC/L (in brown or black); it will lead to short circuit if it is connected to AC/N. ※DALI interface(primary side) ‧Apply DALI signal between DA+ and DA- ‧DALI protocol comprises 16 groups and 64 addresses. ‧First step is fixed at 6% of output. File Name:LCM-40DA-SPEC 2018-05-02 40W Multiple-Stage Constant Current Mode LED Driver LCM-40DA series SYNCHRONIZATION OPERATION ‧Synchronization up to 10 drivers (1 master + 9 slaves) ‧Dimming operating range : 10%~100% ‧Sync cable length : < 5m ‧Sync cable type : Flat cable 2 ‧Sync cable cross section area : 22 – 24 AWG (0.2~0.3mm ) SYN. SYN. SYN. LCM-40DA LCM-40DA LCM-40DA --- --- (Slave 2) (Master) (Slave 1) 5m 5m NOTE: 1. Please make sure all units are set to 100% dimming setting (factory default) before synchronizing. 2. Min. Dimming operating range depends on dimmer setting. TEMPERATURE COMPENSATION OPERATION LCM-40DA have the built-in temperature compensation function ; by connecting a temperature sensor (NTC resistor) between the +NTC / -NTC terminal of LCM-40DA and the detecting point on the lighting system or the surrounding environment, output current of LCM-40DA could be correspondingly changed, based on the sensed temperature, to ensure the long life of LED. NTC derating curve 105 100 220K 220KΩ O 95 330K 330KΩ O 470KO 470KΩ 90 85 80 75 70 65 55 60 65 70 75 80 85 90 95 Sensed Temperature(℃) ◎ LCM-40DA can still be operated normally when the NTC resistor is not connected and the value of output current will be the current level selected through the DIP switch. NTC reference: ◎ NTC resistance Output Current < 60℃, 100% of the rated current (corresponds to the setting current level) 220K > 60℃, output current begins to reduce, please refer to the curve for details. < 70℃, 100% of the rated current (corresponds to the setting current level) 330K > 70℃, output current begins to reduce, please refer to the curve for details. < 80℃, 100% of the rated current (corresponds to the setting current level) 470K > 80℃, output current begins to reduce, please refer to the curve for details. Notes: 1. MEAN WELL does not offer the NTC resistor and all the data above are measured by using THINKING TTC03 series. 2. If other brands of NTC resistor is applied,please check the temperature curve first. ◎ Dimming and synchronization function of the driver will be invalid when the "temperature compensation" function is in use. File Name:LCM-40DA-SPEC 2018-05-02 Output Current (%) + + + + + + 40W Multiple-Stage Constant Current Mode LED Driver LCM-40DA series OUTPUT LOAD vs TEMPERATURE 100 100 Others 80 80 60 60 40 40 1050mA 20 20 -30 -15 004 15 30050 60 70 (HORIZONTAL) -30 -25 0 204555657590 (HORIZONTAL) AMBIENT TEMPERATURE,Ta (℃) Tcase (℃) STATIC CHARACTERISTIC 100 90 80 70 60 50 40 180 190 200 210 220 230 240 250 260 270 280 295 INPUT VOLTAGE (V) 60Hz ※De-rating is needed under low input voltage. File Name:LCM-40DA-SPEC 2018-05-02 LOAD (%) LOAD (%) LOAD (%) 40W Multiple-Stage Constant Current Mode LED Driver LCM-40DA series TOTAL HARMONIC DISTORTION (THD) ※ Tcase at 80℃ 70% 50% 45% 60% 40% 50% 35% 350mA 350mA 30% 40% 500mA 500mA 25% 30% 600mA 600mA 20% 700mA 700mA 20% 15% 900mA 10% 900mA 10% 5% 1050mA 1050mA 0% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD LOAD (230Vac Input) (277Vac Input) POWER FACTOR (PF) CHARACTERISTIC ※ Tcase at 80℃ 1.00 0.98 0.97 0.95 0.92 0.94 0.89 350 0.86 0.91 350 0.83 500 500 0.80 0.88 0.77 600 600 0.85 0.74 0.71 700 0.82 700 0.68 900 0.79 0.65 900 0.62 1050 0.76 0.59 1050 0.56 0.73 0.53 0.70 0.50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% (40W) (40W) LOAD LOAD (230Vac Input) (277Vac Input) EFFICIENCY vs LOAD LCM-40DA series possess superior working efficiency that up to 91% can be reached in field applications. ※ Tcase at 80℃ 95.0% 95.0% 90.0% 90.0% 85.0% 85.0% 80.0% 80.0% 350 350 75.0% 75.0% 500 500 70.0% 600 70.0% 600 65.0% 700 65.0% 700 900 60.0% 60.0% 900 1050 55.0% 1050 55.0% 50.0% 50.0% 45.0% 45.0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD LOAD (230Vac Input) (277Vac Input) File Name:LCM-40DA-SPEC 2018-05-02 EFFICIENCY (%) THD PF EFFICIENCY (%) PF THD 40W Multiple-Stage Constant Current Mode LED Driver LCM-40DA series MECHANICAL SPECIFICATION Case No.LCM-60A Unit:mm 123.5 6.75 110 1 2 6.75 3 TB1 4 5 1 2 SYN. 3 1 CN101 4 2 3 TB3 CN100 4 1 TB5 2 ON 1 2 3 4 5 6 40 39.3 65.5 tc 7.8 7.8 2-ψ4 Bottom View tc ‧ : Max. Case Temperature ※Terminal Pin No. Assignment( TB1) Pin No. Assignment Pin No. Assignment 14 AC/L DA+ 25 AC/N DA- 3 PUSH ※Terminal Pin No. Assignment(TB3) Pin No. Assignment Pin No. Assignment 1 +FAN(optional) 3 +NTC 2 -FAN(optional) 4 -NTC ◎ Pin1(+FAN) / Pin2(-FAN) is the Auxiliary DC output for the optional model LCM-40DA-AUX; it can be used to drive fan. ※Terminal Pin No. Assignment(TB5) Pin No. Assignment 1 +V 2 -V ※SYN. Connector(CN101/CN100):JST B2B-XH or equivalent Pin No. Assignment Mating Housing Terminal 1,3 + JST XHP JST SXH-001T-P0.6 or equivalent or equivalent 2,4 - Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:LCM-40DA-SPEC 2018-05-02 2-ψ4.2 81.5 23 6.75 68 4 6.75 15

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

MEAN WELL LCM-40DA

Why buy from GID?

What they say about us

Related Products