MEAN WELL LHP-200-5

200W Single Output with PFC Function L HP-200 series ■ Features ■ Applications ‧UniversalACinput/Fullrange ‧LED electronic signage ‧LED display application ‧Built-incurrentsharingfunction(2units) ‧LED luminous characters ‧Withpowergoodsignaloutput ‧LEDTVwall ‧Built-inactivePFCfunction ‧LEDchannelletter ‧Lowleakagecurrent<1.0mA ‧Fanlessdesign,Coolingbyfreeairconvection ‧Protections:Shortcircuit/Overload/ Overvoltage/Overtemperature ‧3yearswarranty ■ Description LHP-200seriesisa200WLEDdisplaypowersolution.Theultralowprofiledesignthatallowsthe heightandweightofthesignmoduletobeslim.Itgreatlysimplifiesthedeliveryandinstallation process.Accountingforhighefficiencyandenergysaving,theserieseffectivelyachieveselectricity reduction.ItissuitableforLEDsignagedisplay,movingsign,LEDchannelletterandLEDTVwalletc. ■ ModelEncoding LHP- 200 - 5 Ratedoutputvoltage(4.2/4.6/5V) Ratedwattage Seriesname File Name:LHP-200-SPEC 2018-04-08 200W Single Output with PFC Function L HP-200 series SPECIFICATION MODEL LHP-200-4.2 LHP-200-4.6 LHP-200-5 DC VOLTAGE 4.2V 4.6V 5V RATED CURRENT 40A 40A 40A RATED POWER(convection) 168W 184W 200W RIPPLE & NOISE (max.) Note.2 200mVp-p 200mVp-p 200mVp-p VOLTAGE RANGE 3.8~4.2V 4.2~4.6V 4.5~5V OUTPUT VOLTAGE TOLERANCE Note.3 ±5.0% LINE REGULATION ±1.0% LOAD REGULATION ±1.0% SETUP, RISE TIME 2000ms, 100ms / 115AC 2000ms, 100ms / 230AC at full load HOLD UP TIME (Typ.) 10ms/230VAC 10ms/115VAC VOLTAGE RANGE Note.4 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz PF≥0.95 / 230VAC at full load POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) 90% 91% 91% AC CURRENT (Typ.) 2.2A/115VAC 1.1A/230VAC INRUSH CURRENT (Typ.) Cold start 40A/115VAC 80A/230VAC LEAKAGE CURRENT <1.0mA / 240VAC SHORT CIRCUIT Protection type : recovers automatically after fault condition is removed 125 ~ 175% rated output power OVER LOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 5.5~ 6V OVER VOLTAGE Protection type :Hiccup mode, recovers automatically after fault condition is removed OVER TEMPERATURE Protection type :Shut down O/P voltage, recovers automatically after temperature goes down FUNCTION 2.3~3.3V,10mA POWER GOOD -40 ~ +80℃(Refer to “Derating Curve") WORKING TEMP. -40 ~ +90℃, 5~ 95% RH non-condensing STORAGE TEMP., HUMIDITY ENVIRONMENT TEMP. COEFFICIENT ±0.02%/℃ (0 ~ 50℃) VIBRATION 1 ~ 200Hz, 2G 10min./1cycle, period for 30min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1,EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3.0KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG,O/P-FG:≥10M Ohms/500VDC/25℃/ 70%RH EMC EMC EMISSION Compliance to EN55032,GB/T9254 Class B,EN61000-3-2,EN61000-3-3 (Note.6) EMC IMMUNITY Compliance to EN55024,EN61000-4-2,3,4,5,6,8,11; 100K hrs min. MIL-HDBK-217F (25℃) MTBF OTHERS DIMENSION 220*50*26mm (L*W*H) PACKING 0.39kg;30pcs/13.82kg/0.69CUFT 1.AllparametersNOTspeciallymentionedaremeasuredat230VACinput,ratedloadand25ofambienttemperature. 2.Ripple&noisearemeasuredat20MHzofbandwidthbyusinga12"twistedpair-wireterminatedwitha0.1uf&47ufparallelcapacitor. NOTE 3.Tolerance:includessetuptolerance,lineregulationandloadregulation. 4.Deratingmaybeneededunderlowinputvoltages.Pleasecheckthederatingcurveformoredetails. 5. Theambient temperaturederatingof5/1000misneededforoperatingaltitudegreaterthan2000m(6500ft) 6.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.ForguidanceonhowtoperformtheseEMCtests,pleasereferto“EMItestingofcomponentpowersupplies.”(asavailableonhttp://www. meanwell.com) File Name:LHP-200-SPEC 2018-04-08 200W Single Output with PFC Function L L H HP P- -2 20 00 0 s se er riie es s Block Diagram POWER EMI FILTER RECTIFIERS +V PFC & I/P SWITCH- & CIRCUIT -V RECTIFIER ING FILTER FG DETECTION CIRCUIT DC OK O.T.P. O.L.P. CONTROL O.V.P. CURRENT CS SHARING Derating Curve 100 80 60 40 20 -40 0 15 30 40 50 60 70 80 (HORIZONTAL) AMBIENT TEMPERATURE (℃) STATIC CHARACTERISTIC 100 90 80 70 60 50 40 110 120 140 160 180 220 90 100 200 240 264 INPUT VOLTAGE (V) 60Hz F Fiille N e Na am me e::L LH HP P- -2 20 00 0- -S SP PE EC 2 C 20 01 18 8- -0 04 4- -0 08 8 LOAD (%) LOAD (%) 200W Single Output with PFC Function L HP-200 series Function Manual 1.Share function +V +V LOAD -V -V CS+ PSU GND P.G +V -V CS+ PSU GND P.G File Name:LHP-200-SPEC 2018-04-08 200W Single Output with PFC Function L HP-200 series Mechanical Specification Unit:mm 220 26 211 4.5 1 2 3 1 J1 1 2 2 3 3 4 AC Input Terminal pin NO. Assignment DC Output Terminal pin NO. Assignment Pin No. Assignment Terminal Max mounting torque Pin No. Assignment Terminal Max mounting torque 1 1,2 +V (Elinker) (Elinker) 5Kgf-cm 2 AC/N 5Kgf-cm LW1C-8.25-3P-130-04A LW1B-8.25-6P-130-05A 3,4 -V 3 AC/L Function Connector(J1) Pin No. Assignment Terminal 1 CS+ JIESHITAI 2 GND A2001A-03-A1MA-P-D 3 PG(Power Good) File Name:LHP-200-SPEC 2018-04-08 42 4 1 43 3. 5 50 380 200W Single Output with PFC Function L HP-200 series Installation 1.Operate with additional aluminum plate In order to meet the“Derating Curve”and the “Static Characteristics” ,LHP-200 series must be installed onto an aluminum plate(or the cabinet of the same size) on the bottom.The size of the suggested aluminum plate is shown as below. And for optimizing thermal performance, the aluminum plate must have an even and smooth surface (or coated with thermal grease), and LHP-200 series must be firmly mounted at the center of the aluminum plate. unit:mm M3*4 2.For heat dissipation, at least 5cm installation distance around the PSU should be kept, shown as below: 5cm 5cm File Name:LHP-200-SPEC 2018-04-08 380 5cm 5cm 3 5cm