MEAN WELL LPF-16-48

Mean Well LPF-16 SERIES 16 Watt LED Power Supply 16W Single Output Switching Power Supply LPF-16 series Measures: 5.83 x 1.57 x 1.26” ■ Features : ‧Universal AC input / Full range (up to 305VAC) ‧Protections: Short circuit / Over current / Over voltage / Over temperature ‧Built-in active PFC function ‧Cooling by free air convection ‧Fully isolated plastic case with IP30 level (Note.8) ‧Class Ⅱ power unit, no FG ‧Class 2 power unit ‧IP67(optional , model NO. : LPF-16-12 P) ‧Suitable for LED lighting and moving sign applications ‧Compliance to worldwide safety regulations for lighting ‧Suitable for dry / damp locations(wet location for LPF-16-12 P) ‧5 years warranty 110 F M M SELV IP30 SPECIFICATION MODEL LPF-16-12 LPF-16-15 LPF-16-20 LPF-16-24 LPF-16-30 LPF-16-36 LPF-16-42 LPF-16-48 LPF-16-54 DC VOLTAGE 12V 15V 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.4 6.6 ~12V 8.25 ~ 15V 11 ~ 20V 13.2 ~ 24V 16.5 ~ 30V 19.8 ~ 36V 23.1 ~ 42V 26.4 ~ 48V 29.7 ~ 54V RATED CURRENT 1.34A 1.07A 0.8A 0.67A 0.54A 0.45A 0.39A 0.34A 0.3A RATED POWER 16.08W 16.05W 16W 16.08W 16.2W 16.2W 16.38W 16.32W 16.2W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p 350mVp-p OUTPUT VOLTAGE TOLERANCE Note.3 ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±2.0% ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME Note.6 1500ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC HOLD UP TIME (Typ.) 16ms at full load 230VAC /115VAC VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) INPUT EFFICIENCY (Typ.) 84% 84% 86% 86% 86% 86% 86% 86% 86% AC CURRENT 0.4A / 115VAC 0.25A / 230VAC 0.2A/277VAC INRUSH CURRENT (Typ.) COLD START 45A(twidth=200μs measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT <0.75mA / 240VAC 95 ~ 108% OVER CURRENT Note.4 Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. PROTECTION 15 ~ 18V 17.5 ~ 21V 28 ~ 35V 34 ~ 40V 41 ~ 49V 46 ~ 54V 54 ~ 63V 59 ~ 66V 23 ~ 27V OVER VOLTAGE Protection type : Shut down and latch off o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down -35 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +80℃, 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08,EN61347-1, EN61347-2-13 independent,EN62384,J61347-1, SAFETY STANDARDS J61347-2-13 approved,IP67 (optional) ; Design refer to UL60950-1, TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH EMC Compliance to EN55015; EN61000-3-2 Class C (≧50% load) ; EN61000-3-3 EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547,light industry level(surge 2KV), criteria A EMC IMMUNITY MTBF 473.3Khrs min. MIL-HDBK-217F (25℃) 148*40*32mm (L*W*H) OTHERS DIMENSION 0.21Kg; 40pcs/9.4Kg/1.02CUFT PACKING NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 8. Suitable for indoor use. 9.To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. File Name:LPF-16-SPEC 2013-12-20 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-LPF-16-power-supply.html h t t p: / / pow e r. sa ge r. c om Mean Well LPF-16 SERIES 16 Watt LED Power Supply 16W Single Output Switching Power Supply LP F-16 s e rie s Measures: 5.83 x 1.57 x 1.26” Mechanical Specification Case No. : LPF-16A Unit:mm 300±20 148 300±20 3.5 SJTW 18AWG AC/N(Blue) SVT 18AWG*2C AC/L(Brown) T case 60 +V(Red) -V(Black) 3.5 ※ T case: Max. Case Temperature. Recommend Mounting Direction Block Diagram Fosc : 100KHz RECTIFIERS EMI FILTER POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER O.L.P. DETECTION O.L.P. CIRCUIT PWM & PFC CONTROL O.V.P. D De er ra at tiin ng C g Cu ur rv ve e Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 -35 -30 -15 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 1 17 75 5 180 200 230 305 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:LPF-16-SPEC 2013-12-20 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-LPF-16-power-supply.html h t t p: / / pow e r. sa ge r. c om ψ3.6 ψ3.6 LOAD (%) 3.5 40 L LO OA AD ( D (% %) ) 13 3.5 32 Mean Well LPF-16 SERIES 16 Watt LED Power Supply 16W Single Output Switching Power Supply LP F-1 6 s e r ie s Measures: 5.83 x 1.57 x 1.26” Power Factor Characteristic Constant Current Mode 1.02 1 0.98 0.96 0.94 110V 0.92 230V 0.9 277V 0.88 0.86 0.84 0.82 50% 60% 70% 80% 90% 100% (16W) LOAD EFFICIENCY vs LOAD (48V Model) LPF-16 series possess superior working efficiency that up to 86% can be reached in field applications. 100 90 80 70 60 110V 50 230V 40 277V 30 20 10 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). (B) 100 Constant Current area (A) Constant Voltage area 50 (max.) (C) Hiccup Protection 50 95 Io(%) Typical LED power supply I-V curve File Name:LPF-16-SPEC 2013-12-20 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-LPF-16-power-supply.html h t t p: / / pow e r. sa ge r. c om PF EFFICIENCY (%) Vo(%)